[SOLVED] Updating 3rd Windows 7 x86 to windows 10 failed on reboot

Step 1:
  1. Download the attachment fixlist.txt and save it to your desktop.
  2. Right-click on FRST.exe and select "Run as administrator".
  3. Press the Fix button.
  4. The tool will now process fixlist.txt.
  5. If for some reason the tool needs a restart, please make sure you let the system restart normally. After that let the tool complete its run.
  6. When finished, a log called Fixlog.txt will appear in the same directory the tool is run from.
  7. Attach the logfile Fixlog.txt to your next reply.

Step 2:
Try the upgrade again and report the result.
If it fails attach the file C:\$Windows.~BT\Sources\panther\setupact.log
 

Attachments

Ran fixlist , said it had finished but log showed 0 bytes , reran log attached . Tried upgrade again failed again with same messages after 2nd reboot. setupact .log attached
 

Attachments

Attach following files when available:
- C:\Windows\panther\setupact.log
- C:\Windows\inf\setupapi.app.log
- C:\Windows\inf\setupapi.dev.log
 
If CCleaner is still installed, uninstall it.
Which NVIDIA drivers are installed ?


Remove Update Manually
  1. Click on the Start button and in the search box, type Command Prompt.
  2. When you see Command Prompt on the list, right-click on it and select Run as administrator.
  3. When command prompt opens, copy and paste the following command into it, then press enter.
    wusa /uninstall /KB:3140245
  4. Let me know if it says it was successful or if there are any errors.
 
Nvidia graphic drivers are ver 391.35 , KB3140245 uninstalled and asked for a reset
 
Step 1:
Uninstall SnapDownloader 1.14.7

Step 2:
  1. Click the Start button and choose Control Panel.
  2. In the upper right corner ensure the View by: is set to Category.
  3. Select the Programs group.
  4. Click the Turn Windows features on or off link. This will bring up the Windows Features dialog.
    Note: This loads your components hive which is what we want. Please keep this dialog open while you perform the remaining steps. You can minimize it if you wish but keep it open.

  5. Right-click on the file FRST.exe and choose Run as administrator.
  6. Copy and paste KB3140245 into the Search box and click the Search Registry button.
  7. When the scan is complete, a message will display that 'SearchReg.txt' is saved in the same folder FRST was started from. Notepad will open this file also. Close Notepad and attach the file 'SearchReg.txt' to your next reply.
  8. You may close any remaining open windows now.
 
No reference of Snapdownloader in programs and features so could not uninstall it , searched registry for KB3140245 txt attached
 

Attachments

Step 1:
  1. Download the attachment fixlist.txt and save it to your desktop.
  2. Right-click on FRST.exe and select "Run as administrator".
  3. Press the Fix button.
  4. The tool will now process fixlist.txt.
  5. If for some reason the tool needs a restart, please make sure you let the system restart normally. After that let the tool complete its run.
  6. When finished, a log called Fixlog.txt will appear in the same directory the tool is run from.
  7. Attach the logfile Fixlog.txt to your next reply.

Step 2:
Try the upgrade again and report the result.
If it fails attach the file C:\$Windows.~BT\Sources\panther\setupact.log
 

Attachments

FRST Registry Search
  1. Click the Start button and choose Control Panel.
  2. In the upper right corner ensure the View by: is set to Category.
  3. Select the Programs group.
  4. Click the Turn Windows features on or off link. This will bring up the Windows Features dialog.
    Note: This loads your components hive which is what we want. Please keep this dialog open while you perform the remaining steps. You can minimize it if you wish but keep it open.

  5. Right-click on the file FRST64.exe and choose Run as administrator.
  6. Copy and paste {C939EC0F-2F56-4CE8-AF56-2336596A5FA7} into the Search box and click the Search Registry button.
  7. When the scan is complete, a message will display that 'SearchReg.txt' is saved in the same folder FRST was started from.
  8. Notepad will open this file also. Close Notepad and attach the file 'SearchReg.txt' to your next reply.
  9. You may close any remaining open windows now.
 
Remove Update Manually
  1. Click on the Start button and in the search box, type Command Prompt.
  2. When you see Command Prompt on the list, right-click on it and select Run as administrator.
  3. When command prompt opens, copy and paste the following command into it, then press enter.
    wusa /uninstall /KB:5015861
  4. Let me know if it says it was successful or if there are any errors.
 
FRST Scan:
  1. Click the Start button and choose Control Panel.
  2. In the upper right corner ensure the View by: is set to Category.
  3. Select the Programs group.
  4. Click the Turn Windows features on or off link. This will bring up the Windows Features dialog.
    Note: This loads your components hive which is what we want. Please keep this dialog open while you perform the remaining steps. You can minimize it if you wish but keep it open.

  5. Right-click on the file FRST.exe and choose Run as administrator.
  6. Copy and paste KB5015861 into the Search box and click the Search Registry button.
  7. When the scan is complete, a message will display that 'SearchReg.txt' is saved in the same folder FRST was started from. Notepad will open this file also. Close Notepad and attach the file 'SearchReg.txt' to your next reply.
  8. You may close any remaining open windows now.
 
Nothing was found. I doubt this is correct. Please do following.

FRST Registry Search
  1. Click the Start button and in the search box, type CMD
  2. When you see cmd.exe on the list, right-click on it and select Run as administrator.
  3. When command prompt opens, copy and paste the following command into it, press enter afterwards.

    Code:
    REG LOAD HKLM\COMPONENTS C:\Windows\System32\config\COMPONENTS

    Note: This loads your components hive which is what we want. Please keep the command prompt window open while you perform the remaining steps. You can minimize it if you wish but keep it open.
  4. Right-click on the file FRST.exe and choose Run as administrator.
  5. Copy and paste KB5015861 into the Search box and click the Search Registry button.
  6. When the scan is complete, a message will display that 'SearchReg.txt' is saved in the same folder FRST was started from. Notepad will open this file also. Close Notepad and attach the file 'SearchReg.txt' to your next reply.
  7. You may close any remaining open windows now.
 
Provide the Components Hive
1. Navigate to C:\Windows\System32\Config and locate the COMPONENTS file.
2. Please copy this file to your desktop.
Note: If you receive an error that this file is in-use, simply reboot your computer and try again. Note: If you find that you need to reboot and are unable to because this is a server then try Option#2 below.
3. Right-click on this file on your desktop and select Send To...Compressed (zipped) folder. This will create a file named COMPONENTS.ZIP on your desktop.
4. The file will likely be too large to upload here so please upload to Gofile or WeTransfer and just provide the link here.


Option#2 (only if you are unable to follow the previous instructions)

  • Please download the Freeware RegBak from here: Acelogix Software - Download products
    You will find it at the bottom of the page that the link brings you to.
  • Go ahead and install this program and accept all the defaults. After the last install screen the program should open.
  • Click the New Backup button. Accept the defaults and simply click Start.
  • When it says Finished successfully, click the Close button.
  • This will bring you back to the main screen of the program. You will see one entry in this list with the date that you did it. Right-click on this line-item and select Explore Backup...
  • This will bring you into the folder where the backup was made. You should see a Users folder and a Windows folder along with a couple other files. Double-click on the Windows folder to open it. Then open the System32 folder and then config folder. You should see around 6 files in here, one of which is named COMPONENTS.
  • Copy the COMPONENTS file to your Desktop. If the COMPONENTS file does not exist, please fetch it instead from C:\Windows\System32\config\COMPONENTS.
  • Now right-click on the COMPONENTS file that is on your desktop and select Send to > Compressed (zipped) folder.
  • Then please upload the zip file (COMPONENTS.zip) to your favourite file sharing website (it will be too big to upload here). Examples of services to upload to are Gofile or WeTransfer and then just provide the link in your reply.
  • You can close any open windows you have as well as the RegBak program now.
 
Back
Top