[SOLVED] SFCFix version 3.0.2.1 by niemiro has encountered an unhandled exception. Currently storing 0 datablocks. CRASH

P

P.Olsen

Member
Joined
Dec 28, 2019
Posts
39
Hi There

I'm new here to Sysnative.com so hope this is addressed the right place.

After having had issues for several month regarding updating to Win10 ver 1903 from 1809 (error 0xc1900101 0x30017) and still not getting it fixed.. I encountered issues running sfc /scannow that it said it could not fix, then i did a dism scan and that stated that the issues it found got fixed. Then running Sfc /scannow after a reboot of Laptop.. but no luck it explained as previously that it could not fix issues. I went online and found the tool Sfcfix wishing that it could solve the issues, I tried to run it but very soon after launching it crashed, below is the txt file report. Hope to get SFCFIX to run as intended.

Hope someone can help out, because this has been an uphill struggle.
 

Attachments

Hello and welcome!

Step#1 - FRST Scan

1. Please download Farbar Recovery Scan Tool and save it to your Desktop.
Note: You need to run the 64-bit Version so please ensure you download that one.
2. Right-click FRST64.exe and click Run as Administrator to run it as administrator. When the tool opens, click Yes to disclaimer.
3. Please ensure you place a check mark in the Addition.txt check box at the bottom of the form before running (if not already checked).
4. Press Scan button.
5. It will produce a log called FRST.txt in the same directory the tool is run from (which should now be the desktop)
6. Please attach the log back here.
7. Another log (Addition.txt - also located in the same directory as FRST64.exe) will be generated Please also attach that along with the FRST.txt in your reply.
 
Thanks for getting back to me so promptly. I did not expect that. Here i have attached the txt files requested. Thanks :-)
 

Attachments

Thank you. Now let's see the issues:

SFC Scan


  1. Click on the Start button and in the search box, type Command Prompt
  2. When you see Command Prompt on the list, right-click on it and select Run as administrator
  3. When command prompt opens, copy and paste the following commands into it, press enter after each

    sfc /scannow

    Wait for this to finish before you continue

    copy %windir%\logs\cbs\cbs.log "%userprofile%\Desktop\cbs.txt"
  4. This will create a file, cbs.txt on your Desktop. Please attach this to your next post.
 
SFCFix Script

Warning: this fix is specific to the user in this thread. No one else should follow these instructions as it may cause more harm than good. If you are after assistance, please start a thread of your own.


  1. Download SFCFix.exe (by niemiro) and save this to your Desktop.
  2. Download the file below, SFCFix.zip, and save this to your Desktop. Ensure that this file is named SFCFix.zip - do not rename it.
  3. Save any open documents and close all open windows.
  4. On your Desktop, you should see two files: SFCFix.exe and SFCFix.zip.
  5. Drag the file SFCFix.zip onto the file SFCFix.exe and release it.
  6. SFCFix will now process the script.
  7. Upon completion, a file should be created on your Desktop: SFCFix.txt.
  8. Copy (Ctrl+C) and Paste (Ctrl+V) the contents of this file into your next post for me to analyse please - put [CODE][/CODE] tags around the log to break up the text.



SFC Scan


  1. Click on the Start button and in the search box, type Command Prompt
  2. When you see Command Prompt on the list, right-click on it and select Run as administrator
  3. When command prompt opens, copy and paste the following commands into it, press enter after each

    sfc /scannow

    Wait for this to finish before you continue

    copy %windir%\logs\cbs\cbs.log "%userprofile%\Desktop\cbs.txt"
  4. This will create a file, cbs.txt on your Desktop. Please attach this to your next post.
 

Attachments

Hi Again, here is the Sfcfix.txt info:

[SFCFix version 3.0.2.1 by niemiro.
Start time: 2019-12-30 11:36:19.410
Microsoft Windows 10 Build 17763 - amd64
Using .zip script file at C:\Users\prebe_000\Desktop\SFCFix.zip [0]




PowerCopy::
Successfully took permissions for file or folder C:\WINDOWS\Winsxs\amd64_windows-defender-management-powershell_31bf3856ad364e35_10.0.17763.831_none_5892c02f26f780e5\MSFT_MpPreference.cdxml

Successfully copied file C:\Users\prebe_000\AppData\Local\niemiro\Archive\WinSxS\amd64_windows-defender-management-powershell_31bf3856ad364e35_10.0.17763.831_none_5892c02f26f780e5\MSFT_MpPreference.cdxml to C:\WINDOWS\Winsxs\amd64_windows-defender-management-powershell_31bf3856ad364e35_10.0.17763.831_none_5892c02f26f780e5\MSFT_MpPreference.cdxml.

Successfully restored ownership for C:\WINDOWS\Winsxs\amd64_windows-defender-management-powershell_31bf3856ad364e35_10.0.17763.831_none_5892c02f26f780e5\MSFT_MpPreference.cdxml
Successfully restored permissions on C:\WINDOWS\Winsxs\amd64_windows-defender-management-powershell_31bf3856ad364e35_10.0.17763.831_none_5892c02f26f780e5\MSFT_MpPreference.cdxml
PowerCopy:: directive completed successfully.




Successfully processed all directives.
SFCFix version 3.0.2.1 by niemiro has completed.
Currently storing 1 datablocks.
Finish time: 2019-12-30 11:36:21.301
Script hash: cKewy9E7w3kQezOv9tYiHJb45pGyclOtLyzlt5c4rbs=
----------------------EOF-----------------------]
 

Attachments

Sadly it still reverted back to old ver of windows (1809). Hope there is something else to do about this. I have attached a screen shot of the error.
 

Attachments

  • SharedScreenshot.jpg
    SharedScreenshot.jpg
    32.4 KB · Views: 2
Absolutely!

SFCFixScript.txt

Warning: this fix is specific to the user in this thread. No one else should follow these instructions as it may cause more harm than good. If you are after assistance, please start a thread of your own.

  1. Download SFCFix.exe (by niemiro) and save this to your Desktop.
  2. Download the attached file, SFCFixScript.txt, and save this to your Desktop. Ensure that this file is named SFCFixScript.txt - do not rename it.
  3. Save any open documents and close all open windows.
  4. On your Desktop, you should see two files: SFCFix.exe and SFCFixScript.txt.
  5. Drag the file SFCFixScript.txt onto the file SFCFix.exe and release it.
  6. SFCFix will now process the script.
  7. Upon completion, a log should be created on your Desktop: SFCFix.txt.
  8. Copy (Ctrl+C) and Paste (Ctrl+V) the contents of this into your next post for me to analyse please - put [CODE][/CODE] tags around the log to break up the text.[/list]
 

Attachments

Ok.. I have the result here:




[SFCFix version 3.0.2.1 by niemiro.
Start time: 2019-12-30 15:23:13.703
Microsoft Windows 10 Build 17763 - amd64
Using .txt script file at C:\Users\prebe_000\Desktop\SFCFixScript.txt [0]




FileScan::
WARNING: There may be further unlisted copies of some of these files on the system.

[0: 1] C:\WINDOWS\setupact.log
File is untraceable.
Found: 7rtq9GBiiXHh/+789Wz+CIWmqMhi53gmeHt1baS7g14=
Version number not available.
Trace not available.



[1: 1] C:\WINDOWS\setuperr.log
File is untraceable.
Found: 47DEQpj8HBSa+/TImW+5JCeuQeRkm5NMpJWZG3hSuFU=
Version number not available.
Trace not available.



[2: 1] C:\$SysReset\Logs\setupact.log
File is untraceable.
Found: 2/qe3KHyxY2sO/XyOL4iWM2ouRNCWpsihkc9L8leiL0=
Version number not available.
Trace not available.



[3: 1] C:\$SysReset\Logs\setuperr.log
File is untraceable.
Found: qFgZ6wo03r64axxsiscuNTwoh52s2mvxKo+gZgHx2Mc=
Version number not available.
Trace not available.



[4: 1] C:\WINDOWS\Panther\NewOs\Panther\setupact.log
File is untraceable.
Found: hMRBd+XdDCuZvJ+R71gZXjJIqkhQnj7Il0qnX+cf4l4=
Version number not available.
Trace not available.



[5: 1] C:\WINDOWS\Panther\NewOs\Panther\setuperr.log
File is untraceable.
Found: 47DEQpj8HBSa+/TImW+5JCeuQeRkm5NMpJWZG3hSuFU=
Version number not available.
Trace not available.



[6: 1] C:\WINDOWS\Logs\RecEnv_Ramdisk\setuperr.log
File is untraceable.
Found: 47DEQpj8HBSa+/TImW+5JCeuQeRkm5NMpJWZG3hSuFU=
Version number not available.
Trace not available.



[7: 1] C:\WINDOWS\Logs\RecEnv_Ramdisk\setupact.log
File is untraceable.
Found: 9sJIyaTuu+nxNA0ZGYfTynstxnMwIL1UnrmoxfjGvZc=
Version number not available.
Trace not available.



[8: 1] C:\$WINDOWS.~BT\Sources\Rollback\setuperr.log
File is untraceable.
Found: 47DEQpj8HBSa+/TImW+5JCeuQeRkm5NMpJWZG3hSuFU=
Version number not available.
Trace not available.



[9: 1] C:\$WINDOWS.~BT\Sources\Rollback\setupact.log
File is untraceable.
Found: iP/lNmUUhWsQIhnQ6oIgAvbzTLk39oYjlBbxbRKGs/M=
Version number not available.
Trace not available.
FileScan:: directive completed successfully.




Successfully processed all directives.
SFCFix version 3.0.2.1 by niemiro has completed.
Currently storing 1 datablocks.
Finish time: 2019-12-30 15:24:13.280
Script hash: dGVyH1knFwCO/A9Xqhjqle2YgKUshOPnySE9GOhfapE=
----------------------EOF-----------------------]
 
Okay.

Disconnect all peripheral devices that are connected to the system, except for the mouse, keyboard and display.
Uninstall the display driver and retry the upgrade.
 
I have two display adaptor drivers:

Intel(R) HD Graphics 4000

NVIDIA GeForce GT 620M

do i delete both drivers for now ?
 
I tried the upgrade again after deleting both display drivers. But no luck it reverted again as previous and with the same error message after.
 
You must log in or register to reply here.

Has Sysnative Forums helped you? Please consider donating to help us support the site!

Back
Top