server 2019 system sfc & dism unable to repair

D

dantokin

Member
Joined
Oct 14, 2019
Posts
9
Hi,

I'm posting here, because I have searched & unable to find a solution for this issue.
To avoid reinstalling system, I try to fix the system. Issue is : unable to add/remove role/functions from server.

sfc stucks at 70% in Windows and through Windows PE or recovery mode.
dism unable to repair because it can find the source. Source : ISO or extract install.wim (indicating index) from iso into the desktop.

Unable to repair with iso to reinstall the system keeping the applications & files. Error installation failed.

Could you please advise ?
Thanks in advance.
 
I suspect SFCFix will work now:

SFCFix Script

Warning: this fix is specific to the user in this thread. No one else should follow these instructions as it may cause more harm than good. If you are after assistance, please start a thread of your own.


  1. Download SFCFix.exe (by niemiro) and save this to your Desktop.
  2. Download the file below, SFCFix.zip, and save this to your Desktop. Ensure that this file is named SFCFix.zip - do not rename it.
  3. Save any open documents and close all open windows.
  4. On your Desktop, you should see two files: SFCFix.exe and SFCFix.zip.
  5. Drag the file SFCFix.zip onto the file SFCFix.exe and release it.
  6. SFCFix will now process the script.
  7. Upon completion, a file should be created on your Desktop: SFCFix.txt.
  8. Copy (Ctrl+C) and Paste (Ctrl+V) the contents of this file into your next post for me to analyse please - put [CODE][/CODE] tags around the log to break up the text.

Afterwards, run DISM again and attach CBS.log.
 

Attachments

Retrieve Components Hive
1. Navigate to C:\Windows\System32\Config and locate the COMPONENTS file.
2. Please copy this file to your desktop.
Note: If you receive an error that this file is in-use, simply reboot your computer and try again.
3. Right-click on this file on your desktop and select Send To...Compressed (zipped) folder. This will create a file named COMPONENTS.ZIP on your desktop.
4. The file will likely be too large to upload here so please upload to a file sharing service. Examples of services to upload to are Dropbox or OneDrive or SendSpace and then just provide the link in your reply.
 
And the very last fix.

SFCFix Script

Warning: this fix is specific to the user in this thread. No one else should follow these instructions as it may cause more harm than good. If you are after assistance, please start a thread of your own.


  1. Download SFCFix.exe (by niemiro) and save this to your Desktop.
  2. Download the file below, SFCFix.zip, and save this to your Desktop. Ensure that this file is named SFCFix.zip - do not rename it.
  3. Save any open documents and close all open windows.
  4. On your Desktop, you should see two files: SFCFix.exe and SFCFix.zip.
  5. Drag the file SFCFix.zip onto the file SFCFix.exe and release it.
  6. SFCFix will now process the script.
  7. Upon completion, a file should be created on your Desktop: SFCFix.txt.
  8. Copy (Ctrl+C) and Paste (Ctrl+V) the contents of this file into your next post for me to analyse please - put [CODE][/CODE] tags around the log to break up the text.
 

Attachments

Ok, I will try and let you know when available. file size is 1.6kb : could you please confirmed that is the correct script ?
 
Just to let you know that it still fails indicating that it can't find the source. Thanks for your work
 
SFCFix Script

Warning: this fix is specific to the user in this thread. No one else should follow these instructions as it may cause more harm than good. If you are after assistance, please start a thread of your own.


  1. Download SFCFix.exe (by niemiro) and save this to your Desktop.
  2. Download the file below, SFCFix.zip, and save this to your Desktop. Ensure that this file is named SFCFix.zip - do not rename it.
  3. Save any open documents and close all open windows.
  4. On your Desktop, you should see two files: SFCFix.exe and SFCFix.zip.
  5. Drag the file SFCFix.zip onto the file SFCFix.exe and release it.
  6. SFCFix will now process the script.
  7. Upon completion, a file should be created on your Desktop: SFCFix.txt.
  8. Copy (Ctrl+C) and Paste (Ctrl+V) the contents of this file into your next post for me to analyse please - put [CODE][/CODE] tags around the log to break up the text.
 

Attachments

Code: 
SFCFix version 3.0.2.1 by niemiro.
Start time: 2019-10-22 19:02:23.592
Microsoft Windows Server 10 Insider Slow, Build 17763 - amd64
Using .zip script file at C:\Users\adminmdsi\Desktop\SFCFix.zip [0]




PowerCopy::
Successfully took permissions for file or folder C:\Windows\WinSxS\Manifests

Successfully copied file C:\Users\adminmdsi\AppData\Local\niemiro\Archive\Manifests\amd64_adobe-flash-for-windows_31bf3856ad364e35_10.0.17763.827_none_a0801ad2ef276b8b.manifest to C:\Windows\WinSxS\Manifests\amd64_adobe-flash-for-windows_31bf3856ad364e35_10.0.17763.827_none_a0801ad2ef276b8b.manifest.
Successfully copied file C:\Users\adminmdsi\AppData\Local\niemiro\Archive\Manifests\wow64_adobe-flash-for-windows_31bf3856ad364e35_10.0.17763.827_none_aad4c52523882d86.manifest to C:\Windows\WinSxS\Manifests\wow64_adobe-flash-for-windows_31bf3856ad364e35_10.0.17763.827_none_aad4c52523882d86.manifest.

Successfully restored ownership for C:\Windows\WinSxS\Manifests
Successfully restored permissions on C:\Windows\WinSxS\Manifests
PowerCopy:: directive completed successfully.




Successfully processed all directives.
SFCFix version 3.0.2.1 by niemiro has completed.
Currently storing 1 datablocks.
Finish time: 2019-10-22 19:02:39.146
Script hash: lfzPAdCcPOywK7hruw9yNNPZMM8fz3lS9T2Da6zjYAY=
----------------------EOF-----------------------
Would you mind explaining what are the actions done here ? The result is still the same. Do you think it would help to copy winsxs folder from a clean install to the damaged one ?
 

Attachments

Absolutely!

I analyze the log files and based on the needed files, I download and extract the files from updates that contain them.

A clean installed Server would not be of help unless it had the very updates we need applied.

SFCFix Script

Warning: this fix is specific to the user in this thread. No one else should follow these instructions as it may cause more harm than good. If you are after assistance, please start a thread of your own.


  1. Download SFCFix.exe (by niemiro) and save this to your Desktop.
  2. Download the file below, SFCFix.zip, and save this to your Desktop. Ensure that this file is named SFCFix.zip - do not rename it.
  3. Save any open documents and close all open windows.
  4. On your Desktop, you should see two files: SFCFix.exe and SFCFix.zip.
  5. Drag the file SFCFix.zip onto the file SFCFix.exe and release it.
  6. SFCFix will now process the script.
  7. Upon completion, a file should be created on your Desktop: SFCFix.txt.
  8. Copy (Ctrl+C) and Paste (Ctrl+V) the contents of this file into your next post for me to analyse please - put [CODE][/CODE] tags around the log to break up the text.


SFCFix.zip
 
You must log in or register to reply here.

Has Sysnative Forums helped you? Please consider donating to help us support the site!

Back
Top