Hello Fredphoesh, and welcome to Sysnative!
Unfortunately, only one dump has been included which makes debugging more difficult. To stop any more being deleted when/if you have more crashes, don't use CCleaner or any temporary file cleaners until troubleshooting is finished as they can delete dump files.
If you are overclocking your system, please return all overclocked components to their stock speeds. If the BSOD's are found not to be caused by the overclock, you can re-overclock the components once we have finished the diagnostics
Recommendations
Problem Devices
Please install the drivers for this device:
Code:
Not Available USB\VID_1210&PID_000A&MI_04\6&268B79FD&0&0004 The drivers for this device are not installed.
Devices without drivers can cause issues and BSOD's. To find the device, open device manager and check for any yellow exclamation mark icons
ASUS Software
Please remove the following software:
Code:
Start Menu\Programs\ASUS Public:Start Menu\Programs\ASUS Public
Start Menu\Programs\ASUS\ASUSUpdate Public:Start Menu\Programs\ASUS\ASUSUpdate Public
Start Menu\Programs\ASUS\PC Probe II Public:Start Menu\Programs\ASUS\PC Probe II Public
They use a driver called ASACPI.sys which is known to cause issues with Windows 7.
Daemon Tools
Please uninstall DAEMON Tools. This software uses a driver called sptd.sys which is a known BSOD cause in Windows 7. Uninstall the software using Add/Remove Programs. Once the program is uninstalled, run
sptd.sys uninstaller to remove the driver from your system.
As an alternative, many people recommend the use of
Total Mounter or
Magic ISO
BSOD Analysis
Your dumps point to a driver called AsUpIo.sys, another ASUS driver. Removing the ASUS software mentioned above should also remove the drivers associated with them. It is highly possible that the ASUS drivers are the reason for your BSOD's. You also have Driver Verifier enabled, please disable it now by following these steps:
Start Menu -> All Programs -> Accessories -> Right click Command Prompt -> Run as administrator -> Type the following command and then Enter:verifier /reset
-> Restart your computer.
Work through each of these steps and report back after you've completed each one. If you have any questions, feel free to ask
Stephen
