xilolee Moderator Staff member Joined Dec 31, 2013 Posts 3,670 Location World, Europe, Italy Dec 11, 2020 #41 You could be able to block device driver installation for "Intel(R) 300 Series Chipset Family SATA AHCI Controller" (iastorac.sys), Hardware ID--> "PCI\VEN_8086&DEV_A353&SUBSYS_380817AA&REV_10" with the following command (launched in an elevated command prompt): Code: reg add "hklm\Software\Policies\Microsoft\Windows\DeviceInstall\Restrictions\DenyDeviceIDs" /v "PCI\VEN_8086&DEV_A353&SUBSYS_380817AA&REV_10" /t reg_sz /f If that shouldn't work, the following operations should block ALL devices drivers installations for your PC. Valid for Windows 10 Version 10.0.19042.685 (Version 20H2 Build 19042.685), i.e. most recent version. Go to Control Panel\Hardware and Sound\Devices and Printers Right-click your PC Click Device installation settings It will appear a window saying: "Do you want to automatically download manufacturers' apps and custom icons that are available for your device?" Radio/option buttons: - "Yes (recommended)" - "No (your device might not work as expected)" Buttons: "Save changes" "Cancel" Select no and click Save changes. Last edited: Dec 11, 2020
You could be able to block device driver installation for "Intel(R) 300 Series Chipset Family SATA AHCI Controller" (iastorac.sys), Hardware ID--> "PCI\VEN_8086&DEV_A353&SUBSYS_380817AA&REV_10" with the following command (launched in an elevated command prompt): Code: reg add "hklm\Software\Policies\Microsoft\Windows\DeviceInstall\Restrictions\DenyDeviceIDs" /v "PCI\VEN_8086&DEV_A353&SUBSYS_380817AA&REV_10" /t reg_sz /f If that shouldn't work, the following operations should block ALL devices drivers installations for your PC. Valid for Windows 10 Version 10.0.19042.685 (Version 20H2 Build 19042.685), i.e. most recent version. Go to Control Panel\Hardware and Sound\Devices and Printers Right-click your PC Click Device installation settings It will appear a window saying: "Do you want to automatically download manufacturers' apps and custom icons that are available for your device?" Radio/option buttons: - "Yes (recommended)" - "No (your device might not work as expected)" Buttons: "Save changes" "Cancel" Select no and click Save changes.
S shahinyp Well-known member Joined Dec 2, 2020 Posts 55 Dec 11, 2020 #42 I'm afraid that I'm still getting the cracks, Is there anything I can do to improve it ?
S shahinyp Well-known member Joined Dec 2, 2020 Posts 55 Dec 11, 2020 #43 when I changed the driver from Intel to standard SATA, It was ok for a while but the cracks sound came back again.
when I changed the driver from Intel to standard SATA, It was ok for a while but the cracks sound came back again.
S shahinyp Well-known member Joined Dec 2, 2020 Posts 55 Dec 11, 2020 #44 The cracks are loud now like before, even with audio enhancement off.
xilolee Moderator Staff member Joined Dec 31, 2013 Posts 3,670 Location World, Europe, Italy Dec 12, 2020 #45 Let's verify the values with this batch (click to download). Right-click on it, run as administrator, you should find result.txt on your desktop, copy its content here. Attachments Verify_MSISupported_values.bat 865 bytes · Views: 3
Let's verify the values with this batch (click to download). Right-click on it, run as administrator, you should find result.txt on your desktop, copy its content here.
S shahinyp Well-known member Joined Dec 2, 2020 Posts 55 Dec 12, 2020 #46 here is the result, I tried both 1 and 0 value for this. (If this is the same value as before which we changed in the earlier post) Attachments result.txt 522 bytes · Views: 1
here is the result, I tried both 1 and 0 value for this. (If this is the same value as before which we changed in the earlier post)
xilolee Moderator Staff member Joined Dec 31, 2013 Posts 3,670 Location World, Europe, Italy Dec 12, 2020 #47 Re-launch the command and reboot: Code: reg add "hklm\SYSTEM\CurrentControlSet\Enum\PCI\VEN_8086&DEV_A353&SUBSYS_380817AA&REV_10\3&11583659&0&B8\Device Parameters\Interrupt Management\MessageSignaledInterruptProperties" /v MSISupported /t reg_dword /d 0 /f
Re-launch the command and reboot: Code: reg add "hklm\SYSTEM\CurrentControlSet\Enum\PCI\VEN_8086&DEV_A353&SUBSYS_380817AA&REV_10\3&11583659&0&B8\Device Parameters\Interrupt Management\MessageSignaledInterruptProperties" /v MSISupported /t reg_dword /d 0 /f
S shahinyp Well-known member Joined Dec 2, 2020 Posts 55 Dec 12, 2020 #48 didn't work, It got even worse. This is the result now Attachments result.txt 522 bytes · Views: 0
xilolee Moderator Staff member Joined Dec 31, 2013 Posts 3,670 Location World, Europe, Italy Dec 12, 2020 #49 Download the attached file, unzip its folder on the desktop, launch the following command, zip devices.html you'll find on your desktop, and send it here: Code: "%userprofile%\Desktop\devmanview x64 1.72 portable\devmanview.exe" /shtml "%userprofile%\desktop\devices.html" Attachments devmanview x64 1.72 portable.zip 96.5 KB · Views: 2
Download the attached file, unzip its folder on the desktop, launch the following command, zip devices.html you'll find on your desktop, and send it here: Code: "%userprofile%\Desktop\devmanview x64 1.72 portable\devmanview.exe" /shtml "%userprofile%\desktop\devices.html"
S shahinyp Well-known member Joined Dec 2, 2020 Posts 55 Dec 12, 2020 #50 devices.html Attachments devices.zip 11.8 KB · Views: 1
xilolee Moderator Staff member Joined Dec 31, 2013 Posts 3,670 Location World, Europe, Italy Dec 13, 2020 #51 Try to install graphics and lan drivers available on your laptop support webpage: laptops and netbooks :: legion series :: legion y540 15irh :: 81sxcontentdetail - Lenovo Support US Last edited: Dec 13, 2020
Try to install graphics and lan drivers available on your laptop support webpage: laptops and netbooks :: legion series :: legion y540 15irh :: 81sxcontentdetail - Lenovo Support US
S shahinyp Well-known member Joined Dec 2, 2020 Posts 55 Dec 13, 2020 #52 ok, I did that, nothing changes.
xilolee Moderator Staff member Joined Dec 31, 2013 Posts 3,670 Location World, Europe, Italy Dec 13, 2020 #53 Send fresh logs.
S shahinyp Well-known member Joined Dec 2, 2020 Posts 55 Dec 13, 2020 #54 what do you mean by fresh logs ?
xilolee Moderator Staff member Joined Dec 31, 2013 Posts 3,670 Location World, Europe, Italy Dec 13, 2020 #55 See second post.
S shahinyp Well-known member Joined Dec 2, 2020 Posts 55 Dec 13, 2020 #56 http://speccy.piriform.com/results/YqJswy2G5S66jjaGwxQjMvy Attachments SysnativeFileCollectionApp.zip 682 KB · Views: 1
S shahinyp Well-known member Joined Dec 2, 2020 Posts 55 Dec 13, 2020 #57 For the trace file, it says the file is too large. (even with 'rar' format)
xilolee Moderator Staff member Joined Dec 31, 2013 Posts 3,670 Location World, Europe, Italy Dec 13, 2020 #58 Re-read fourth point and you'll find how to do.
S shahinyp Well-known member Joined Dec 2, 2020 Posts 55 Dec 13, 2020 #60 I didn't do the things on the fifth point, should I do them?