Freezing/BSOD DPC WATCHDOG VIOLATION

Lightning13 · Monday at 10:00 PM

I cannot connect it directly as is. I will probably have to take apart my case a bit and reconnect the loop.

I’m in a small form factor PC, Formd T1. All water cooled, custom loop. But if the issue is the riser cable again then I will definitely reconsider my case and having to use a riser cable.

I’ve had this card in another build for about a year prior, so I just don’t think my GPU just went bad all of the sudden but it’s not impossible.

ubuysa · Tuesday at 2:00 AM

Maybe not but your BSODs are in that graphics area so something isn't right there.

It IS worth trying back-level versions of the driver, as I suggested earlier, try the last three back-level versions (with DDU in between). If it BSODs on all these and the most recent one (so it BSODs on the four most-recent versions of the driver) then it's most likely a hardware issue; the card, the riser cable, the power cable, or the port on the motherboard.

xilolee · Tuesday at 3:52 AM

Did you get a log with Speedfan?

In the first post, you wrote to have updated the BIOS, but the latest log shows an older one (2611 - 2024/04/17); most recent is 3035 - 2024/09/09 (or 3040 beta - 2024/09/18).
Updating BIOS and chipset drivers could improve stability (i.e., less crashes/bsods).

Lightning13 · 2024-10-02T23:18:39-0400

So I updated BIOS and chipset drivers, no luck.

I rolled back to the last few nvidia drivers, no luck.

I ran SpeedFan and my GPU idled at 33 went up to 63 and maxed out at 75, settling at 73 just before the crash.

I just took apart my build in attempt to plug my GPU directly into my motherboard. Get it all together and no post. Check my connections, no post once again.

Unplug my GPU, no post. Then no power at all.

Tested PSU, working. Tried again to turn on system, no power.

Seems like my motherboard got fried..

Lightning13 · 2024-10-03T00:07:48-0400

Scratch that, it was just the power button not working since I unscrewed the motherboard(left one screw in) so it lost the grounding.

I got it to boot, ran benchmark and still crashing with error x133. So I guess I will look into RMA’ing my GPU…

ubuysa · 2024-10-03T06:28:38-0400

IMO the GPU is the most likely culprit.

Search

Search

Freezing/BSOD DPC WATCHDOG VIOLATION

Lightning13

Member

ubuysa

Sysnative Staff
BSOD Kernel Dump Senior Analyst
Contributor

xilolee

Moderator

Lightning13

Member

Lightning13

Member

ubuysa

Sysnative Staff
BSOD Kernel Dump Senior Analyst
Contributor

Freezing/BSOD DPC WATCHDOG VIOLATION

Lightning13

Member

ubuysa

Sysnative Staff BSOD Kernel Dump Senior AnalystContributor

xilolee

Moderator

Lightning13

Member

Lightning13

Member

ubuysa

Sysnative Staff BSOD Kernel Dump Senior AnalystContributor

Sysnative Staff
BSOD Kernel Dump Senior Analyst
Contributor

Sysnative Staff
BSOD Kernel Dump Senior Analyst
Contributor