[SOLVED] Cant run SFCfix cause of side by side configuration is incorrect

L

luminati

Well-known member
Joined
Oct 29, 2022
Posts
84
so i just got the dread
Cannot repair member file [l:36{18}]"Amd64\CNBJ2530.DPB" of prncacla.inf, Version = 6.3.9600.17415, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type = [l:24{12}]"driverUpdate", TypeName neutral, PublicKey neutral in the store, hash mismatch

so i searced for guides and after while found yours to be the best but my pc is somehow more fecked up than some others and cant run most thing including software design to fix my problem like including the SFCfix

and this may be caused by auto defrag
my pc is a windows 8.1 and is a lenovo z40-70
 

Attachments

Hello and welcome,

Follow the instructions below please.
Try to run SFCFix.exe with the fix provided. If it fails provide the log anyway and resume with step 2.

Step 1:
WARNING! The following fix is specific to the user's system in this thread only. No one else should follow these instructions, as it could damage your system.
  • Download
    myjIXnC.png
    SFCFix and move the executable to your desktop.
  • Download the attachment SFCFix.zip and save it on your desktop.
  • Save any work you have open, and close all programs.
  • Drag the SFCFix.zip file over the SFCFix.exe executable and release it.
    1p8eDnI.gif
  • SFCFix will launch, let it complete.
  • Once done, a file will appear on your desktop, called SFCFix.txt.
  • Open the file, then copy and paste its content in your next reply.

Step 2:
Provide the Components Hive
1. Navigate to C:\Windows\System32\Config and locate the COMPONENTS file.
2. Please copy this file to your desktop.
Note: If you receive an error that this file is in-use, simply reboot your computer and try again. Note: If you find that you need to reboot and are unable to because this is a server then try Option#2 below.
3. Right-click on this file on your desktop and select Send To...Compressed (zipped) folder. This will create a file named COMPONENTS.ZIP on your desktop.
4. The file will likely be too large to upload here so please upload to Gofile or WeTransfer and just provide the link here.

Option#2 (only if you are unable to follow the previous instructions)

  • Please download the Freeware RegBak from here: Acelogix Software - Download products
     You will find it at the bottom of the page that the link brings you to.
  • Go ahead and install this program and accept all the defaults. After the last install screen the program should open.
  • Click the New Backup button. Accept the defaults and simply click Start.
  • When it says Finished successfully, click the Close button.
  • This will bring you back to the main screen of the program. You will see one entry in this list with the date that you did it. Right-click on this line-item and select Explore Backup...
  • This will bring you into the folder where the backup was made. You should see a Users folder and a Windows folder along with a couple other files. Double-click on the Windows folder to open it. Then open the System32 folder and then config folder. You should see around 6 files in here, one of which is named COMPONENTS.
  • Copy the COMPONENTS file to your Desktop. If the COMPONENTS file does not exist, please fetch it instead from C:\Windows\System32\config\COMPONENTS.
  • Now right-click on the COMPONENTS file that is on your desktop and select Send to > Compressed (zipped) folder.
  • Then please upload the zip file (COMPONENTS.zip) to your favourite file sharing website (it will be too big to upload here). Examples of services to upload to are Gofile or WeTransfer and then just provide the link in your reply.
  • You can close any open windows you have as well as the RegBak program now.
 

Attachments

It is only the tool SFCFix that reports the 'side-by-side configuration' error ?

FRST Scan:
  1. Download the Farbar Recovery Scan Tool and save it to your Desktop:
    64-bit: Downloading Farbar Recovery Scan Tool
    Note: Your antivirus program may report FRST incorrectly as an infection. If so, disable the real-time protection when downloading and running FRST.
  2. Right-click to run the tool as administrator. When the tool opens click Yes to disclaimer.
  3. Note: Ensure that the Addition.txt check box is checked at the bottom of the form within the Optional Scan area.
  4. Press the Scan button.
  5. Please wait for the tool to finish. It will produce two logfiles called FRST.txt and Addition.txt in the same directory the tool is run from (which should be the desktop)
  6. Post the logfiles FRST.txt and Addition.txt as attachment in your next reply.
 
So almost all tools/programs/apps report that error when i try to run it
But for some reason blender and cura slicer and a few other works, and those programs are my most used program/apps
 
Step 1:
Provide SideBySide hive
  • Click on the Start button and in the search box, type regedit
  • When you see regedit on the list, right-click on it and select Run as administrator.
  • When regedit opens, using the left pane, navigate to the following registry key and select it by clicking on it once.
    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\SideBySide
  • Once selected, click File > Export....
  • Change the Save as type: to Registry Hive Files (*.*).
  • Name this file SideBySide (with no file extension) and save it to your Desktop.
  • Right-click on the SideBySide file and choose Send To -> Compressed (zipped) Folder.
  • Attach the .ZIP file to your next post.

Step 2:
Download
51e15692b05a4-MiniToolbox.PNG
MiniToolBox and save the file on your desktop.
Note: Save all your work and close all programs!
Rightclick "MiniToolBox" and select "Run as administrator".

If you see the startup message "Are you sure you want to continue?" select Yes.
Put a checkmark at Select All.
Click "Go".
When the scan is finished a log file with the name "MTB.txt" will appear on your desktop.
Attach this log file to your next reply.
 
The registry export you provided is a .reg file. I need it as a hive file.
Please redo Step 2 in my post message #7.

Download the attachment FRSTfix.zip and save it on your desktop.
Unzip the file, do not change the default folder.
When done there is a folder called FRSTfix on your desktop containing 2 files, CNBJ2530.DPB and x86_microsoft.windows.gdiplus_6595b64144ccf1df_1.0.9600.20616_none_d4b943b5dc6dd0b9.manifest
Is that done successful ?
 

Attachments

I cant do step 2 cause the program wont run
PeterJ said:
The registry export you provided is a .reg file. I need it as a hive file.
Please redo Step 2 in my post message #7.

Download the attachment FRSTfix.zip and save it on your desktop.
Unzip the file, do not change the default folder.
When done there is a folder called FRSTfix on your desktop containing 2 files, CNBJ2530.DPB and x86_microsoft.windows.gdiplus_6595b64144ccf1df_1.0.9600.20616_none_d4b943b5dc6dd0b9.manifest
Is that done successful ?
Click to expand...
it is succesful
 
I cant do step 2 cause the program wont run
Click to expand...
Oops, I ment step 1.

Warning: This script was written specifically for this user, for use on that particular machine. Do not run this script on another machine.
  1. Download the attachment fixlist.txt and save it to your desktop.
  2. Right-click on FRST64.exe and select "Run as administrator".
  3. Press the Fix button.
  4. The tool will now process fixlist.txt.
  5. If for some reason the tool needs a restart, please make sure you let the system restart normally. After that let the tool complete its run.
  6. When finished, a log called Fixlog.txt will appear in the same directory the tool is run from.
  7. Attach the logfile Fixlog.txt to your next reply.
 

Attachments

I hope I'm correct now
Click to expand...
No, the file has the extension .reg also.
Please do following exactly. The red lines seems the ones you have missed.

Provide SideBySide hive
  • Click on the Start button and in the search box, type regedit
  • When you see regedit on the list, right-click on it and select Run as administrator.
  • When regedit opens, using the left pane, navigate to the following registry key and select it by clicking on it once.
    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\SideBySide
  • Once selected, click File > Export....
  • Change the Save as type: to Registry Hive Files (*.*).
  • Name this file SideBySide (with no file extension) and save it to your Desktop.
  • Right-click on the SideBySide file and choose Send To -> Compressed (zipped) Folder.
  • Attach the .ZIP file to your next post.
 
You must log in or register to reply here.

Has Sysnative Forums helped you? Please consider donating to help us support the site!

Back
Top