Can't install updates.

M

Maddgifted

Member
Joined
Jan 4, 2020
Posts
12
While trying to correctly apply all the possibly needed Windows Updates, I ended up not being able to install both KB4525235 and Windows 10.
Both fail with Code Getting Error 8007001f-20006.

I'm not sure where to start, but I need to install updates to install windows 10 using the Media Creation Tool
 
I'm sorry that I didn't see the instructions sooner, I'll run the scans and post updates as I do them.

Thank you for your paitence.
 
SFCFix version 3.0.2.1 by niemiro.
Start time: 2020-01-04 23:59:50.494
Microsoft Windows 7 Service Pack 1 - amd64
Not using a script file.




AutoAnalysis::
SUMMARY: Some corruptions could not be fixed automatically. Seek advice from helper or sysnative.com.
CBS & SFC total detected corruption count: 0
CBS & SFC total unimportant corruption count: 0
CBS & SFC total fixed corruption count: 0
SURT total detected corruption count: 6
SURT total unimportant corruption count: 0
SURT total fixed corruption count: 0
AutoAnalysis:: directive completed successfully.




Successfully processed all directives.



Failed to generate a complete zip file. Upload aborted.


SFCFix version 3.0.2.1 by niemiro has completed.
Currently storing 0 datablocks.
Finish time: 2020-01-05 00:48:31.181
----------------------EOF-----------------------
 
After 8 hours, it's still searching for updates on this computer.
 

Attachments

  • 8 hours later.PNG
    8 hours later.PNG
    31.7 KB · Views: 2
GSmartControl
Follow the instructions below to check your SMART status with GSmartControl:


  • Download the portable version of GSmartControl and save it on your Desktop;
  • Extract the zip file to your Desktop. Open the folder gsmartcontrol-1.1.3-win64 which should be located on your Desktop and double-click gsmartcontrol.exe to launch the program.
  • Identify your drive in the list (if recognized by the tool), and hover your mouse over it.
  • You should see something called: SMART status. It will either read: Enabled, in which case you should do the following:
  • Double-click on it to bring up its window (usually you'll find your drive by its size or its brand name);
  • Go to the Self-Tests tab, then select Extended Self-test in the Test type drop-down list and click on Execute (this test can take a few hours to complete);
  • Once the test is over, the results will be displayed at the bottom of the window. Please copy and paste these results in your next reply or take a screenshot;
  • Also, go in the Attributes tab and if you have any entries highlighted in red or pink, take a screenshot of the GSmartControl window and attach it in your next reply;
  • Please note: If the SMART Status reads: Unsupported, stop and let me know.
    info_failing.png
 
Thank you! I am running the scan and it will take 6 hours. Attached is what's pink so far.
 

Attachments

  • running scan.PNG
    running scan.PNG
    69.4 KB · Views: 6
Unfortunately, your drive is failing!

Please immediately backup your data and replace the drive.

Once replaced, you can reinstall the OS from scratch as bad drives should not be cloned.
 
Reinstall Windows from scratch on the new drive, connect the old drive to an external enclosure and use copy and paste method. Do not clone the bad drive.
 
You must log in or register to reply here.

Has Sysnative Forums helped you? Please consider donating to help us support the site!

Back
Top