jcgriff2 Co-Founder / AdminBSOD Instructor/ExpertMicrosoft MVP (Ret.) Staff member Joined Feb 19, 2012 Posts 21,541 Location New Jersey Shore Feb 1, 2013 #21 Hi - I was curious as to where the driver update came from -- a link to the site, if you have one please. I was unable to locate a 2012 driver and would like to add the link to the DRTs - http://www.carrona.org/dvrref.php https://www.sysnative.com/drivers/ My system - tracert - 4.2.2.4 - Read More: Code: C:\Windows\system32>tracert -d 4.2.2.4 Tracing route to 4.2.2.4 over a maximum of 30 hops 1 1 ms <1 ms 1 ms 192.168.1.1 2 41 ms 39 ms 40 ms 10.5.52.1 3 41 ms 41 ms 27 ms 130.81.136.10 4 36 ms 30 ms 30 ms 130.81.209.140 5 31 ms 30 ms 31 ms 130.81.17.75 6 99 ms 42 ms 42 ms 130.81.19.96 7 58 ms 34 ms 34 ms 152.63.26.117 8 34 ms 36 ms * 4.68.62.41 9 33 ms 34 ms 33 ms 4.69.138.222 10 * * * Request timed out. 11 42 ms 35 ms 39 ms 4.69.134.66 12 141 ms 34 ms 36 ms 4.69.155.16 13 43 ms 33 ms 33 ms 4.2.2.4 Trace complete. I can't imagine why a tracert command would BSOD a system. Assuming no hardware failure, the cause must be a software app you have installed. A few I saw in the files that definitely appear network related to me: Proxifier - http://www.proxifier.com/ VpnOneClick - http://216.185.105.35/vpnoneclick/support Adblock for Internet Explorer - http://simple-adblock.com/ Fiddler2 - http://www.fiddler2.com/fiddler2/version.asp Reconnect 1.5 - http://www.softpedia.com/get/Internet/Other-Internet-Related/ReConnect.shtml IDMan - Internet Download Manager - http://www.internetdownloadmanager.com/ uTorrent - http://www.utorrent.com/ I'm not a Network Expert like some others here and honestly don't fully understand what it is you are trying to do. I have a router/modem here & know that Windows 8 does not need help to connect to and maintain Internet connectivity. I would recommend uninstalling unnecessary network related apps until we get this cleared up. One or more may be causing the BSODs. Is this the purpose for 4.2.2.4? - http://www.sysadminworld.com/2011/speed-up-your-internet-by-choosing-the-fastest-dns-servers/ Your Network info as of 29 Jan 2013: Code: Network Card(s): 4 NIC(s) Installed. [01]: D-Link DFE-530TX PCI Fast Ethernet Adapter (rev.C) Connection Name: Ethernet DHCP Enabled: Yes DHCP Server: N/A IP address(es) [02]: D-Link DFE-520TX PCI Fast Ethernet Adapter Connection Name: Ethernet 2 Status: Media disconnected [03]: Microsoft Network Adapter Multiplexor Driver Connection Name: Network Bridge DHCP Enabled: Yes DHCP Server: 255.255.255.255 IP address(es) [01]: 169.254.201.75 [02]: fe80::f092:8787:e14:c94b [04]: VirtualBox Host-Only Ethernet Adapter Connection Name: VirtualBox Host-Only Network DHCP Enabled: No IP address(es) [01]: 169.254.151.233 [02]: fe80::c97a:57e9:3b2b:97e9 Hyper-V Requirements: VM Monitor Mode Extensions: No Virtualization Enabled In Firmware: No Second Level Address Translation: No Data Execution Prevention Available: Yes Tue 01/29/2013 11:52:50.37 Lastly, Windows was installed on 6 January 2013; WERCON shows App Crashes involving KMPlayer.exe and much more - Code: 1,174 TotalWERCON Entries 359 Windows Updates failures 332 Appx Deployment Failures 82 BSODs 39 App hangs/ crashes The full WERCON file - https://www.sysnative.com/jcgriff2/postedfiles/2013a/WERCON_PRO_02-01-2013_jcgriff2.log.zip Event Viewer logs show Internet issues during OS install, like these - Code: The Network List Service service terminated with the following error: The device is not ready. The IP Helper service terminated with the following error: The service cannot be started, either because it is disabled or because it has no enabled devices associated with it. Regards. . . jcgriff2 Last edited: Feb 1, 2013
Hi - I was curious as to where the driver update came from -- a link to the site, if you have one please. I was unable to locate a 2012 driver and would like to add the link to the DRTs - http://www.carrona.org/dvrref.php https://www.sysnative.com/drivers/ My system - tracert - 4.2.2.4 - Read More: Code: C:\Windows\system32>tracert -d 4.2.2.4 Tracing route to 4.2.2.4 over a maximum of 30 hops 1 1 ms <1 ms 1 ms 192.168.1.1 2 41 ms 39 ms 40 ms 10.5.52.1 3 41 ms 41 ms 27 ms 130.81.136.10 4 36 ms 30 ms 30 ms 130.81.209.140 5 31 ms 30 ms 31 ms 130.81.17.75 6 99 ms 42 ms 42 ms 130.81.19.96 7 58 ms 34 ms 34 ms 152.63.26.117 8 34 ms 36 ms * 4.68.62.41 9 33 ms 34 ms 33 ms 4.69.138.222 10 * * * Request timed out. 11 42 ms 35 ms 39 ms 4.69.134.66 12 141 ms 34 ms 36 ms 4.69.155.16 13 43 ms 33 ms 33 ms 4.2.2.4 Trace complete. I can't imagine why a tracert command would BSOD a system. Assuming no hardware failure, the cause must be a software app you have installed. A few I saw in the files that definitely appear network related to me: Proxifier - http://www.proxifier.com/ VpnOneClick - http://216.185.105.35/vpnoneclick/support Adblock for Internet Explorer - http://simple-adblock.com/ Fiddler2 - http://www.fiddler2.com/fiddler2/version.asp Reconnect 1.5 - http://www.softpedia.com/get/Internet/Other-Internet-Related/ReConnect.shtml IDMan - Internet Download Manager - http://www.internetdownloadmanager.com/ uTorrent - http://www.utorrent.com/ I'm not a Network Expert like some others here and honestly don't fully understand what it is you are trying to do. I have a router/modem here & know that Windows 8 does not need help to connect to and maintain Internet connectivity. I would recommend uninstalling unnecessary network related apps until we get this cleared up. One or more may be causing the BSODs. Is this the purpose for 4.2.2.4? - http://www.sysadminworld.com/2011/speed-up-your-internet-by-choosing-the-fastest-dns-servers/ Your Network info as of 29 Jan 2013: Code: Network Card(s): 4 NIC(s) Installed. [01]: D-Link DFE-530TX PCI Fast Ethernet Adapter (rev.C) Connection Name: Ethernet DHCP Enabled: Yes DHCP Server: N/A IP address(es) [02]: D-Link DFE-520TX PCI Fast Ethernet Adapter Connection Name: Ethernet 2 Status: Media disconnected [03]: Microsoft Network Adapter Multiplexor Driver Connection Name: Network Bridge DHCP Enabled: Yes DHCP Server: 255.255.255.255 IP address(es) [01]: 169.254.201.75 [02]: fe80::f092:8787:e14:c94b [04]: VirtualBox Host-Only Ethernet Adapter Connection Name: VirtualBox Host-Only Network DHCP Enabled: No IP address(es) [01]: 169.254.151.233 [02]: fe80::c97a:57e9:3b2b:97e9 Hyper-V Requirements: VM Monitor Mode Extensions: No Virtualization Enabled In Firmware: No Second Level Address Translation: No Data Execution Prevention Available: Yes Tue 01/29/2013 11:52:50.37 Lastly, Windows was installed on 6 January 2013; WERCON shows App Crashes involving KMPlayer.exe and much more - Code: 1,174 TotalWERCON Entries 359 Windows Updates failures 332 Appx Deployment Failures 82 BSODs 39 App hangs/ crashes The full WERCON file - https://www.sysnative.com/jcgriff2/postedfiles/2013a/WERCON_PRO_02-01-2013_jcgriff2.log.zip Event Viewer logs show Internet issues during OS install, like these - Code: The Network List Service service terminated with the following error: The device is not ready. The IP Helper service terminated with the following error: The service cannot be started, either because it is disabled or because it has no enabled devices associated with it. Regards. . . jcgriff2
jcgriff2 Co-Founder / AdminBSOD Instructor/ExpertMicrosoft MVP (Ret.) Staff member Joined Feb 19, 2012 Posts 21,541 Location New Jersey Shore Feb 1, 2013 #22 I'm sorry to ask as I'm working with your logs and files from 3 days ago, but is Windows Genuine or are you having difficulty activating and validating Windows 8? From Event Viewer: Code: Event[13346]: Log Name: Application Source: Microsoft-Windows-Security-SPP Date: 2013-01-06T23:18:30.000 Level: Error Description: License Activation (slui.exe) failed with the following error code: hr=0x80072EE7 Acquisition of End User License failed. hr=0x80072EE7 Sku Id=9e473b6d-b591-4c46-9c44-90a865f22e76 License acquisition failure details. hr=0x80072EE7 Code: Event[1083]: Log Name: Application Source: Microsoft-Windows-Security-SPP Date: 2013-01-28T17:01:04.000 Level: Error Description: Acquisition of genuine ticket failed (hr=0xC004C4AA) for template Id {88d92734-d682-4d71-983e-d6ec3f16059f} License acquisition failure details. hr=0xC004C4AA http://support.microsoft.com/kb/326851 www.microsoft.com/genuine/validate Regards. . . jcgriff2
I'm sorry to ask as I'm working with your logs and files from 3 days ago, but is Windows Genuine or are you having difficulty activating and validating Windows 8? From Event Viewer: Code: Event[13346]: Log Name: Application Source: Microsoft-Windows-Security-SPP Date: 2013-01-06T23:18:30.000 Level: Error Description: License Activation (slui.exe) failed with the following error code: hr=0x80072EE7 Acquisition of End User License failed. hr=0x80072EE7 Sku Id=9e473b6d-b591-4c46-9c44-90a865f22e76 License acquisition failure details. hr=0x80072EE7 Code: Event[1083]: Log Name: Application Source: Microsoft-Windows-Security-SPP Date: 2013-01-28T17:01:04.000 Level: Error Description: Acquisition of genuine ticket failed (hr=0xC004C4AA) for template Id {88d92734-d682-4d71-983e-d6ec3f16059f} License acquisition failure details. hr=0xC004C4AA http://support.microsoft.com/kb/326851 www.microsoft.com/genuine/validate Regards. . . jcgriff2
I imanonline Member Joined Jan 26, 2013 Posts 12 Feb 1, 2013 #23 I update drivers with Driver Magician and I have no link for it I just say bridge.sys driver have problem with some programs and that command And nothing else I buy license of windows 8 from other site and activated it
I update drivers with Driver Magician and I have no link for it I just say bridge.sys driver have problem with some programs and that command And nothing else I buy license of windows 8 from other site and activated it
jcgriff2 Co-Founder / AdminBSOD Instructor/ExpertMicrosoft MVP (Ret.) Staff member Joined Feb 19, 2012 Posts 21,541 Location New Jersey Shore Feb 1, 2013 #24 Please see my PM. Good luck to you.