BSOD IRQL NOT LESS OR EQUAL
- Thread starter Tchta
- Start date
Update Intel Rapid Storage driver - Downloads for Intel® Rapid Storage Technology (Intel® RST)
- May 7, 2013
- 10,400
Please follow the instructions listed for GSmartControl - Hard Drive (HDD) Diagnostics (Sea Tools for DOS) & SSD Test
Code:
Debug session time: Wed Jul 29 22:15:58.868 2020 (UTC + 1:00)
Loading Dump File [C:\Users\Harry\SysnativeBSODApps\072920-51796-01.dmp]
Built by: 18362.1.amd64fre.19h1_release.190318-1202
System Uptime: 0 days 11:07:31.569
BugCheck Info: [url=http://www.carrona.org/bsodindx.html#0x0000000A]IRQL_NOT_LESS_OR_EQUAL (a)[/url]
Bugcheck code 0000000A
Arguments:
Arg1: 0000000000000000, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000001, bitfield :
bit 0 : value 0 = read operation, 1 = write operation
bit 3 : value 0 = not an execute operation, 1 = execute operation (only on chips which support this level of status)
Arg4: fffff80709ca6d92, address which referenced memory
*** WARNING: Unable to verify timestamp for iaStorE.sys
*** WARNING: Unable to verify timestamp for win32k.sys
BUGCHECK_STR: AV
DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT
PROCESS_NAME: System
Probably caused by: iaStorE.sys ( iaStorE+b3d07 )
FAILURE_BUCKET_ID: AV_iaStorE!unknown_function
MaxSpeed: 3200
CurrentSpeed: 3193
BiosVersion = A11
BiosReleaseDate = 05/07/2019
SystemManufacturer = Dell Inc.
SystemProductName = Inspiron 3847
BaseBoardProduct = 088DT1
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Debug session time: Tue Jul 28 16:45:59.907 2020 (UTC + 1:00)
Loading Dump File [C:\Users\Harry\SysnativeBSODApps\072820-46296-01.dmp]
Built by: 18362.1.amd64fre.19h1_release.190318-1202
System Uptime: 0 days 0:52:34.609
BugCheck Info: [url=http://www.carrona.org/bsodindx.html#0x0000000A]IRQL_NOT_LESS_OR_EQUAL (a)[/url]
Bugcheck code 0000000A
Arguments:
Arg1: 0000000000000000, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000001, bitfield :
bit 0 : value 0 = read operation, 1 = write operation
bit 3 : value 0 = not an execute operation, 1 = execute operation (only on chips which support this level of status)
Arg4: fffff8033aaa6d92, address which referenced memory
*** WARNING: Unable to verify timestamp for iaStorE.sys
BUGCHECK_STR: AV
DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT
PROCESS_NAME: SUInit.exe
Probably caused by: iaStorE.sys ( iaStorE+b3d07 )
FAILURE_BUCKET_ID: AV_iaStorE!unknown_function
MaxSpeed: 3200
CurrentSpeed: 3193
BiosVersion = A11
BiosReleaseDate = 05/07/2019
SystemManufacturer = Dell Inc.
SystemProductName = Inspiron 3847
BaseBoardProduct = 088DT1
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Debug session time: Tue Jul 28 15:51:38.176 2020 (UTC + 1:00)
Loading Dump File [C:\Users\Harry\SysnativeBSODApps\072820-52718-01.dmp]
Built by: 18362.1.amd64fre.19h1_release.190318-1202
System Uptime: 1 days 6:40:51.886
BugCheck Info: [url=http://www.carrona.org/bsodindx.html#0x0000000A]IRQL_NOT_LESS_OR_EQUAL (a)[/url]
Bugcheck code 0000000A
Arguments:
Arg1: 0000000000000000, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000001, bitfield :
bit 0 : value 0 = read operation, 1 = write operation
bit 3 : value 0 = not an execute operation, 1 = execute operation (only on chips which support this level of status)
Arg4: fffff806434a6d92, address which referenced memory
*** WARNING: Unable to verify timestamp for iaStorE.sys
BUGCHECK_STR: AV
DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT
PROCESS_NAME: dwm.exe
Probably caused by: iaStorE.sys ( iaStorE+b3d07 )
FAILURE_BUCKET_ID: AV_iaStorE!unknown_function
MaxSpeed: 3200
CurrentSpeed: 3193
BiosVersion = A11
BiosReleaseDate = 05/07/2019
SystemManufacturer = Dell Inc.
SystemProductName = Inspiron 3847
BaseBoardProduct = 088DT1
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Debug session time: Sat Jul 25 21:45:59.505 2020 (UTC + 1:00)
Loading Dump File [C:\Users\Harry\SysnativeBSODApps\072520-45171-01.dmp]
Built by: 18362.1.amd64fre.19h1_release.190318-1202
System Uptime: 0 days 11:13:54.207
BugCheck Info: [url=http://www.carrona.org/bsodindx.html#0x0000000A]IRQL_NOT_LESS_OR_EQUAL (a)[/url]
Bugcheck code 0000000A
Arguments:
Arg1: 0000000000000000, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000001, bitfield :
bit 0 : value 0 = read operation, 1 = write operation
bit 3 : value 0 = not an execute operation, 1 = execute operation (only on chips which support this level of status)
Arg4: fffff807810a6d92, address which referenced memory
*** WARNING: Unable to verify timestamp for iaStorE.sys
BUGCHECK_STR: AV
DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT
PROCESS_NAME: WmiPrvSE.exe
Probably caused by: iaStorE.sys ( iaStorE+b3d07 )
FAILURE_BUCKET_ID: AV_iaStorE!unknown_function
MaxSpeed: 3200
CurrentSpeed: 3193
BiosVersion = A11
BiosReleaseDate = 05/07/2019
SystemManufacturer = Dell Inc.
SystemProductName = Inspiron 3847
BaseBoardProduct = 088DT1
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Debug session time: Wed Jul 22 18:09:52.184 2020 (UTC + 1:00)
Loading Dump File [C:\Users\Harry\SysnativeBSODApps\072220-43343-01.dmp]
Built by: 18362.1.amd64fre.19h1_release.190318-1202
System Uptime: 0 days 7:26:02.885
BugCheck Info: [url=http://www.carrona.org/bsodindx.html#0x0000000A]IRQL_NOT_LESS_OR_EQUAL (a)[/url]
Bugcheck code 0000000A
Arguments:
Arg1: 0000000000000000, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000001, bitfield :
bit 0 : value 0 = read operation, 1 = write operation
bit 3 : value 0 = not an execute operation, 1 = execute operation (only on chips which support this level of status)
Arg4: fffff8004e4a6d92, address which referenced memory
*** WARNING: Unable to verify timestamp for iaStorE.sys
*** WARNING: Unable to verify timestamp for win32k.sys
BUGCHECK_STR: AV
DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT
PROCESS_NAME: System
Probably caused by: iaStorE.sys ( iaStorE+b3d07 )
FAILURE_BUCKET_ID: AV_iaStorE!unknown_function
MaxSpeed: 3200
CurrentSpeed: 3193
BiosVersion = A11
BiosReleaseDate = 05/07/2019
SystemManufacturer = Dell Inc.
SystemProductName = Inspiron 3847
BaseBoardProduct = 088DT1
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Debug session time: Tue Jul 14 17:45:53.264 2020 (UTC + 1:00)
Loading Dump File [C:\Users\Harry\SysnativeBSODApps\071420-40437-01.dmp]
Built by: 18362.1.amd64fre.19h1_release.190318-1202
System Uptime: 0 days 5:56:54.965
BugCheck Info: [url=http://www.carrona.org/bsodindx.html#0x0000000A]IRQL_NOT_LESS_OR_EQUAL (a)[/url]
Bugcheck code 0000000A
Arguments:
Arg1: 0000000000000000, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000001, bitfield :
bit 0 : value 0 = read operation, 1 = write operation
bit 3 : value 0 = not an execute operation, 1 = execute operation (only on chips which support this level of status)
Arg4: fffff803274a6d72, address which referenced memory
*** WARNING: Unable to verify timestamp for iaStorE.sys
BUGCHECK_STR: AV
DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT
PROCESS_NAME: firefox.exe
Probably caused by: iaStorE.sys ( iaStorE+b3d07 )
FAILURE_BUCKET_ID: AV_iaStorE!unknown_function
MaxSpeed: 3200
CurrentSpeed: 3193
BiosVersion = A11
BiosReleaseDate = 05/07/2019
SystemManufacturer = Dell Inc.
SystemProductName = Inspiron 3847
BaseBoardProduct = 088DT1
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Debug session time: Mon Jul 13 18:45:45.196 2020 (UTC + 1:00)
Loading Dump File [C:\Users\Harry\SysnativeBSODApps\071320-41718-01.dmp]
Built by: 18362.1.amd64fre.19h1_release.190318-1202
System Uptime: 0 days 8:04:48.897
BugCheck Info: [url=http://www.carrona.org/bsodindx.html#0x0000000A]IRQL_NOT_LESS_OR_EQUAL (a)[/url]
Bugcheck code 0000000A
Arguments:
Arg1: 0000000000000000, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000001, bitfield :
bit 0 : value 0 = read operation, 1 = write operation
bit 3 : value 0 = not an execute operation, 1 = execute operation (only on chips which support this level of status)
Arg4: fffff8001a4a6d72, address which referenced memory
*** WARNING: Unable to verify timestamp for iaStorE.sys
*** WARNING: Unable to verify timestamp for win32k.sys
BUGCHECK_STR: AV
DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT
PROCESS_NAME: System
Probably caused by: iaStorE.sys ( iaStorE+b3d07 )
FAILURE_BUCKET_ID: AV_iaStorE!unknown_function
MaxSpeed: 3200
CurrentSpeed: 3193
BiosVersion = A11
BiosReleaseDate = 05/07/2019
SystemManufacturer = Dell Inc.
SystemProductName = Inspiron 3847
BaseBoardProduct = 088DT1
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Debug session time: Fri Jul 10 18:40:14.968 2020 (UTC + 1:00)
Loading Dump File [C:\Users\Harry\SysnativeBSODApps\071020-45171-01.dmp]
Built by: 18362.1.amd64fre.19h1_release.190318-1202
System Uptime: 0 days 6:54:55.669
BugCheck Info: [url=http://www.carrona.org/bsodindx.html#0x0000000A]IRQL_NOT_LESS_OR_EQUAL (a)[/url]
Bugcheck code 0000000A
Arguments:
Arg1: 0000000000000000, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000001, bitfield :
bit 0 : value 0 = read operation, 1 = write operation
bit 3 : value 0 = not an execute operation, 1 = execute operation (only on chips which support this level of status)
Arg4: fffff8007dea6d72, address which referenced memory
*** WARNING: Unable to verify timestamp for iaStorE.sys
*** WARNING: Unable to verify timestamp for win32k.sys
BUGCHECK_STR: AV
DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT
PROCESS_NAME: System
Probably caused by: iaStorE.sys ( iaStorE+b3d07 )
FAILURE_BUCKET_ID: AV_iaStorE!unknown_function
MaxSpeed: 3200
CurrentSpeed: 3193
BiosVersion = A11
BiosReleaseDate = 05/07/2019
SystemManufacturer = Dell Inc.
SystemProductName = Inspiron 3847
BaseBoardProduct = 088DT1
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Debug session time: Thu Jun 25 20:45:41.816 2020 (UTC + 1:00)
Loading Dump File [C:\Users\Harry\SysnativeBSODApps\062520-37234-01.dmp]
Built by: 18362.1.amd64fre.19h1_release.190318-1202
System Uptime: 0 days 11:23:11.517
BugCheck Info: [url=http://www.carrona.org/bsodindx.html#0x0000000A]IRQL_NOT_LESS_OR_EQUAL (a)[/url]
Bugcheck code 0000000A
Arguments:
Arg1: 0000000000000000, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000001, bitfield :
bit 0 : value 0 = read operation, 1 = write operation
bit 3 : value 0 = not an execute operation, 1 = execute operation (only on chips which support this level of status)
Arg4: fffff8006d0a6d72, address which referenced memory
*** WARNING: Unable to verify timestamp for iaStorE.sys
*** WARNING: Unable to verify timestamp for win32k.sys
BUGCHECK_STR: AV
DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT
PROCESS_NAME: System
Probably caused by: iaStorE.sys ( iaStorE+b3d07 )
FAILURE_BUCKET_ID: AV_iaStorE!unknown_function
MaxSpeed: 3200
CurrentSpeed: 3193
BiosVersion = A11
BiosReleaseDate = 05/07/2019
SystemManufacturer = Dell Inc.
SystemProductName = Inspiron 3847
BaseBoardProduct = 088DT1
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Debug session time: Tue Jun 23 20:59:02.657 2020 (UTC + 1:00)
Loading Dump File [C:\Users\Harry\SysnativeBSODApps\062320-52062-01.dmp]
Built by: 18362.1.amd64fre.19h1_release.190318-1202
System Uptime: 0 days 10:42:21.357
BugCheck Info: [url=http://www.carrona.org/bsodindx.html#0x0000000A]IRQL_NOT_LESS_OR_EQUAL (a)[/url]
Bugcheck code 0000000A
Arguments:
Arg1: 0000000000000000, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000001, bitfield :
bit 0 : value 0 = read operation, 1 = write operation
bit 3 : value 0 = not an execute operation, 1 = execute operation (only on chips which support this level of status)
Arg4: fffff807666a6d72, address which referenced memory
*** WARNING: Unable to verify timestamp for iaStorE.sys
*** WARNING: Unable to verify timestamp for win32k.sys
BUGCHECK_STR: AV
DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT
PROCESS_NAME: System
Probably caused by: iaStorE.sys ( iaStorE+b3d07 )
FAILURE_BUCKET_ID: AV_iaStorE!unknown_function
MaxSpeed: 3200
CurrentSpeed: 3193
BiosVersion = A11
BiosReleaseDate = 05/07/2019
SystemManufacturer = Dell Inc.
SystemProductName = Inspiron 3847
BaseBoardProduct = 088DT1
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Debug session time: Mon Jun 15 21:48:13.462 2020 (UTC + 1:00)
Loading Dump File [C:\Users\Harry\SysnativeBSODApps\061520-41640-01.dmp]
Built by: 18362.1.amd64fre.19h1_release.190318-1202
System Uptime: 0 days 2:00:38.169
BugCheck Info: [url=http://www.carrona.org/bsodindx.html#0x0000000A]IRQL_NOT_LESS_OR_EQUAL (a)[/url]
Bugcheck code 0000000A
Arguments:
Arg1: 0000000000000000, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000001, bitfield :
bit 0 : value 0 = read operation, 1 = write operation
bit 3 : value 0 = not an execute operation, 1 = execute operation (only on chips which support this level of status)
Arg4: fffff80720ea6d72, address which referenced memory
*** WARNING: Unable to verify timestamp for iaStorE.sys
*** WARNING: Unable to verify timestamp for win32k.sys
BUGCHECK_STR: AV
DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT
PROCESS_NAME: System
Probably caused by: iaStorE.sys ( iaStorE+b3d07 )
FAILURE_BUCKET_ID: AV_iaStorE!unknown_function
MaxSpeed: 3200
CurrentSpeed: 3193
BiosVersion = A11
BiosReleaseDate = 05/07/2019
SystemManufacturer = Dell Inc.
SystemProductName = Inspiron 3847
BaseBoardProduct = 088DT1
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Debug session time: Mon Jun 15 19:45:53.230 2020 (UTC + 1:00)
Loading Dump File [C:\Users\Harry\SysnativeBSODApps\061520-41140-01.dmp]
Built by: 18362.1.amd64fre.19h1_release.190318-1202
System Uptime: 0 days 7:39:50.931
BugCheck Info: [url=http://www.carrona.org/bsodindx.html#0x0000000A]IRQL_NOT_LESS_OR_EQUAL (a)[/url]
Bugcheck code 0000000A
Arguments:
Arg1: 0000000000000000, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000001, bitfield :
bit 0 : value 0 = read operation, 1 = write operation
bit 3 : value 0 = not an execute operation, 1 = execute operation (only on chips which support this level of status)
Arg4: fffff80550ea6d72, address which referenced memory
*** WARNING: Unable to verify timestamp for iaStorE.sys
*** WARNING: Unable to verify timestamp for win32k.sys
BUGCHECK_STR: AV
DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT
PROCESS_NAME: System
Probably caused by: iaStorE.sys ( iaStorE+b3d07 )
FAILURE_BUCKET_ID: AV_iaStorE!unknown_function
MaxSpeed: 3200
CurrentSpeed: 3193
BiosVersion = A11
BiosReleaseDate = 05/07/2019
SystemManufacturer = Dell Inc.
SystemProductName = Inspiron 3847
BaseBoardProduct = 088DT1
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Debug session time: Thu Jun 11 18:16:48.975 2020 (UTC + 1:00)
Loading Dump File [C:\Users\Harry\SysnativeBSODApps\061120-51937-01.dmp]
Built by: 18362.1.amd64fre.19h1_release.190318-1202
System Uptime: 0 days 9:33:12.678
BugCheck Info: [url=http://www.carrona.org/bsodindx.html#0x0000000A]IRQL_NOT_LESS_OR_EQUAL (a)[/url]
Bugcheck code 0000000A
Arguments:
Arg1: 0000000000000000, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000001, bitfield :
bit 0 : value 0 = read operation, 1 = write operation
bit 3 : value 0 = not an execute operation, 1 = execute operation (only on chips which support this level of status)
Arg4: fffff8052baa6d72, address which referenced memory
*** WARNING: Unable to verify timestamp for iaStorE.sys
*** WARNING: Unable to verify timestamp for win32k.sys
BUGCHECK_STR: AV
DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT
PROCESS_NAME: System
Probably caused by: iaStorE.sys ( iaStorE+b3d07 )
FAILURE_BUCKET_ID: AV_iaStorE!unknown_function
MaxSpeed: 3200
CurrentSpeed: 3193
BiosVersion = A11
BiosReleaseDate = 05/07/2019
SystemManufacturer = Dell Inc.
SystemProductName = Inspiron 3847
BaseBoardProduct = 088DT1
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Debug session time: Wed Jun 10 18:39:30.195 2020 (UTC + 1:00)
Loading Dump File [C:\Users\Harry\SysnativeBSODApps\061020-42625-01.dmp]
Built by: 18362.1.amd64fre.19h1_release.190318-1202
System Uptime: 0 days 9:09:39.898
BugCheck Info: [url=http://www.carrona.org/bsodindx.html#0x0000000A]IRQL_NOT_LESS_OR_EQUAL (a)[/url]
Bugcheck code 0000000A
Arguments:
Arg1: 0000000000000000, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000001, bitfield :
bit 0 : value 0 = read operation, 1 = write operation
bit 3 : value 0 = not an execute operation, 1 = execute operation (only on chips which support this level of status)
Arg4: fffff80113317762, address which referenced memory
*** WARNING: Unable to verify timestamp for iaStorE.sys
*** WARNING: Unable to verify timestamp for win32k.sys
BUGCHECK_STR: AV
DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT
PROCESS_NAME: firefox.exe
Probably caused by: iaStorE.sys ( iaStorE+b3d07 )
FAILURE_BUCKET_ID: AV_iaStorE!unknown_function
MaxSpeed: 3200
CurrentSpeed: 3193
BiosVersion = A11
BiosReleaseDate = 05/07/2019
SystemManufacturer = Dell Inc.
SystemProductName = Inspiron 3847
BaseBoardProduct = 088DT1
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Debug session time: Tue Jun 9 11:33:07.370 2020 (UTC + 1:00)
Loading Dump File [C:\Users\Harry\SysnativeBSODApps\060920-42343-01.dmp]
Built by: 18362.1.amd64fre.19h1_release.190318-1202
System Uptime: 0 days 2:40:32.073
BugCheck Info: [url=http://www.carrona.org/bsodindx.html#0x0000000A]IRQL_NOT_LESS_OR_EQUAL (a)[/url]
Bugcheck code 0000000A
Arguments:
Arg1: 0000000000000000, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000001, bitfield :
bit 0 : value 0 = read operation, 1 = write operation
bit 3 : value 0 = not an execute operation, 1 = execute operation (only on chips which support this level of status)
Arg4: fffff8076c08d8c4, address which referenced memory
*** WARNING: Unable to verify timestamp for iaStorE.sys
*** WARNING: Unable to verify timestamp for win32k.sys
BUGCHECK_STR: AV
DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT
PROCESS_NAME: System
Probably caused by: iaStorE.sys ( iaStorE+65ea )
FAILURE_BUCKET_ID: AV_iaStorE!unknown_function
MaxSpeed: 3200
CurrentSpeed: 3193
BiosVersion = A11
BiosReleaseDate = 05/07/2019
SystemManufacturer = Dell Inc.
SystemProductName = Inspiron 3847
BaseBoardProduct = 088DT1
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Debug session time: Tue Jun 2 15:13:17.382 2020 (UTC + 1:00)
Loading Dump File [C:\Users\Harry\SysnativeBSODApps\060220-40859-01.dmp]
Built by: 18362.1.amd64fre.19h1_release.190318-1202
System Uptime: 0 days 6:14:30.085
BugCheck Info: [url=http://www.carrona.org/bsodindx.html#0x0000007A]KERNEL_DATA_INPAGE_ERROR (7a)[/url]
Bugcheck code 0000007A
Arguments:
Arg1: 0000000000000020, lock type that was held (value 1,2,3, or PTE address)
Arg2: ffffffffc000000e, error status (normally i/o status code)
Arg3: ffffa90f344080e0, current process (virtual address for lock type 3, or PTE)
Arg4: 0000000000000000, virtual address that could not be in-paged (or PTE contents if arg1 is a PTE address)
*** WARNING: Unable to verify timestamp for win32k.sys
DISK_HARDWARE_ERROR: There was error with disk hardware
BUGCHECK_STR: 0x7a_c000000e
PROCESS_NAME: System
Probably caused by: memory_corruption ( nt!MiWriteComplete+16f337 )
FAILURE_BUCKET_ID: 0x7a_c000000e_nt!MiWriteComplete
MaxSpeed: 3200
CurrentSpeed: 3193
BiosVersion = A11
BiosReleaseDate = 05/07/2019
SystemManufacturer = Dell Inc.
SystemProductName = Inspiron 3847
BaseBoardProduct = 088DT1
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Debug session time: Fri May 1 10:52:46.629 2020 (UTC + 1:00)
Loading Dump File [C:\Users\Harry\SysnativeBSODApps\050120-50125-01.dmp]
Built by: 18362.1.amd64fre.19h1_release.190318-1202
System Uptime: 0 days 1:13:29.335
BugCheck Info: [url=http://www.carrona.org/bsodindx.html#0x0000009F]DRIVER_POWER_STATE_FAILURE (9f)[/url]
Bugcheck code 0000009F
Arguments:
Arg1: 0000000000000004, The power transition timed out waiting to synchronize with the Pnp
subsystem.
Arg2: 000000000000012c, Timeout in seconds.
Arg3: ffff9804ba18b040, The thread currently holding on to the Pnp lock.
Arg4: fffff8026c68a8e0, nt!TRIAGE_9F_PNP on Win7 and higher
*** WARNING: Unable to verify timestamp for win32k.sys
Probably caused by: pci.sys
BUGCHECK_STR: 0x9F
DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT
PROCESS_NAME: System
FAILURE_BUCKET_ID: 0x9F_4_iaStorE_STACKPTR_ERROR_IMAGE_pci.sys
MaxSpeed: 3200
CurrentSpeed: 3193
BiosVersion = A10
BiosReleaseDate = 05/10/2018
SystemManufacturer = Dell Inc.
SystemProductName = Inspiron 3847
BaseBoardProduct = 088DT1
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Debug session time: Thu Apr 30 18:56:43.177 2020 (UTC + 1:00)
Loading Dump File [C:\Users\Harry\SysnativeBSODApps\043020-42515-01.dmp]
Built by: 18362.1.amd64fre.19h1_release.190318-1202
System Uptime: 0 days 9:07:23.882
BugCheck Info: [url=http://www.carrona.org/bsodindx.html#0x0000000A]IRQL_NOT_LESS_OR_EQUAL (a)[/url]
Bugcheck code 0000000A
Arguments:
Arg1: 0000000000000000, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000001, bitfield :
bit 0 : value 0 = read operation, 1 = write operation
bit 3 : value 0 = not an execute operation, 1 = execute operation (only on chips which support this level of status)
Arg4: fffff80357717762, address which referenced memory
*** WARNING: Unable to verify timestamp for iaStorE.sys
*** WARNING: Unable to verify timestamp for win32k.sys
BUGCHECK_STR: AV
DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT
PROCESS_NAME: MBAMService.exe
Probably caused by: iaStorE.sys ( iaStorE+b3d07 )
FAILURE_BUCKET_ID: AV_iaStorE!unknown_function
MaxSpeed: 3200
CurrentSpeed: 3193
BiosVersion = A10
BiosReleaseDate = 05/10/2018
SystemManufacturer = Dell Inc.
SystemProductName = Inspiron 3847
BaseBoardProduct = 088DT1
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Debug session time: Tue Apr 28 11:42:43.251 2020 (UTC + 1:00)
Loading Dump File [C:\Users\Harry\SysnativeBSODApps\042820-45421-01.dmp]
Built by: 18362.1.amd64fre.19h1_release.190318-1202
System Uptime: 0 days 1:50:26.964
BugCheck Info: [url=http://www.carrona.org/bsodindx.html#0x0000000A]IRQL_NOT_LESS_OR_EQUAL (a)[/url]
Bugcheck code 0000000A
Arguments:
Arg1: 0000000000000000, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000001, bitfield :
bit 0 : value 0 = read operation, 1 = write operation
bit 3 : value 0 = not an execute operation, 1 = execute operation (only on chips which support this level of status)
Arg4: fffff80519717762, address which referenced memory
*** WARNING: Unable to verify timestamp for iaStorE.sys
*** WARNING: Unable to verify timestamp for storport.sys
*** WARNING: Unable to verify timestamp for win32k.sys
BUGCHECK_STR: AV
DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT
PROCESS_NAME: System
Probably caused by: iaStorE.sys ( iaStorE+b3d07 )
FAILURE_BUCKET_ID: AV_iaStorE!unknown_function
MaxSpeed: 3200
CurrentSpeed: 3193
BiosVersion = A10
BiosReleaseDate = 05/10/2018
SystemManufacturer = Dell Inc.
SystemProductName = Inspiron 3847
BaseBoardProduct = 088DT1
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Debug session time: Fri Apr 24 20:15:43.430 2020 (UTC + 1:00)
Loading Dump File [C:\Users\Harry\SysnativeBSODApps\042420-46406-01.dmp]
Built by: 18362.1.amd64fre.19h1_release.190318-1202
System Uptime: 0 days 10:40:24.135
BugCheck Info: [url=http://www.carrona.org/bsodindx.html#0x0000000A]IRQL_NOT_LESS_OR_EQUAL (a)[/url]
Bugcheck code 0000000A
Arguments:
Arg1: 0000000000000000, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000001, bitfield :
bit 0 : value 0 = read operation, 1 = write operation
bit 3 : value 0 = not an execute operation, 1 = execute operation (only on chips which support this level of status)
Arg4: fffff80777f17762, address which referenced memory
*** WARNING: Unable to verify timestamp for iaStorE.sys
*** WARNING: Unable to verify timestamp for win32k.sys
BUGCHECK_STR: AV
DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT
PROCESS_NAME: System
Probably caused by: iaStorE.sys ( iaStorE+b3d07 )
FAILURE_BUCKET_ID: AV_iaStorE!unknown_function
MaxSpeed: 3200
CurrentSpeed: 3193
BiosVersion = A10
BiosReleaseDate = 05/10/2018
SystemManufacturer = Dell Inc.
SystemProductName = Inspiron 3847
BaseBoardProduct = 088DT1
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Debug session time: Tue Apr 7 11:36:10.622 2020 (UTC + 1:00)
Loading Dump File [C:\Users\Harry\SysnativeBSODApps\040720-49359-01.dmp]
Built by: 18362.1.amd64fre.19h1_release.190318-1202
System Uptime: 0 days 1:32:10.337
BugCheck Info: [url=http://www.carrona.org/bsodindx.html#0x000000EF]CRITICAL_PROCESS_DIED (ef)[/url]
Bugcheck code 000000eF
Arguments:
Arg1: ffff960f20fb2140, Process object or thread object
Arg2: 0000000000000000, If this is 0, a process died. If this is 1, a thread died.
Arg3: 0000000000000000
Arg4: 0000000000000000
*** WARNING: Unable to verify timestamp for win32k.sys
PROCESS_NAME: csrss.exe
BUGCHECK_STR: 0xEF
DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT
Probably caused by: ntkrnlmp.exe ( nt!PspCatchCriticalBreak+115 )
FAILURE_BUCKET_ID: 0xEF_csrss.exe_BUGCHECK_CRITICAL_PROCESS_2e4e90c0_nt!PspCatchCriticalBreak
MaxSpeed: 3200
CurrentSpeed: 3193
BiosVersion = A10
BiosReleaseDate = 05/10/2018
SystemManufacturer = Dell Inc.
SystemProductName = Inspiron 3847
BaseBoardProduct = 088DT1
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``I updated Intel as specified:-
|
- May 7, 2013
- 10,400
Check if there is an additional update for the Intel driver, otherwise I would suggest that you following the HDD/SSD testing instructions.
- May 7, 2013
- 10,400
Could you also please attach the latest dump file in your next post?
The logs displayed possible drive problems.
The BSOD bugchecks were 9F and A
There were misbehaving hardware and software drivers.
Please perform the following steps:
1) Open administrative command prompt and type or copy and paste:
2) sfc /scannow
3) dism /online /cleanup-image /scanhealth
4) dism /online /cleanup-image /restorehealth
5) sfc /scannow
6) chkdsk /scan
7) wmic recoveros set autoreboot = false
8) wmic recoveros set DebugInfoType = 7
9) wmic recoveros get autoreboot
10) wmic recoveros get DebugInfoType
11) bcdedit /enum {badmemory}
12) When these have completed > right click on the top bar or title bar of the administrative command prompt box > left click on edit then select all > right click on the top bar again > left click on edit then copy > paste into the thread
13) Run HD Tune (free version) (all drives)
HD Tune website
Post images into the thread for results on these tabs:
a) Health
b) Benchmark
c) Full error scan
14) Run Sea Tools for Windows
long generic test
Post an image of the test result into the thread
SeaTools for Windows | Seagate
How to use SeaTools for Windows | Seagate Support US
15) Uninstall Malwarebytes using the applicable uninstall tool:
https://downloads.malwarebytes.com/file/mb_clean
16) If there are no BSOD for one week then you can reinstall Malwarebytes
15) Reinstall these drivers:
a) Intel chipset
b) Nvidia GPU
Challenge Page
Challenge Page
Challenge Page
16) After performing all of the above steps run the Dell diagnostics with custom tests:
Support for Inspiron 3847 | Diagnostics | Dell US
Performance
Bluescreen analyzer
Hard drive
Hard drive stress
Memory
Memory stress
Motherboard
Processor
Processor stress
System stress
Video capture
Video card
Video card stress
Take pictures with a camera or smartphone camera > post images into the thread
If there are any problems posting images please use share links: one drive, drop box, or google drive
17) These steps can be performed overnight:
a) HD Tune full error scan
b) Sea Tools for Windows long generic test
c) Dell diagnostics
The BSOD bugchecks were 9F and A
There were misbehaving hardware and software drivers.
Please perform the following steps:
1) Open administrative command prompt and type or copy and paste:
2) sfc /scannow
3) dism /online /cleanup-image /scanhealth
4) dism /online /cleanup-image /restorehealth
5) sfc /scannow
6) chkdsk /scan
7) wmic recoveros set autoreboot = false
8) wmic recoveros set DebugInfoType = 7
9) wmic recoveros get autoreboot
10) wmic recoveros get DebugInfoType
11) bcdedit /enum {badmemory}
12) When these have completed > right click on the top bar or title bar of the administrative command prompt box > left click on edit then select all > right click on the top bar again > left click on edit then copy > paste into the thread
13) Run HD Tune (free version) (all drives)
HD Tune website
Post images into the thread for results on these tabs:
a) Health
b) Benchmark
c) Full error scan
14) Run Sea Tools for Windows
long generic test
Post an image of the test result into the thread
SeaTools for Windows | Seagate
How to use SeaTools for Windows | Seagate Support US
15) Uninstall Malwarebytes using the applicable uninstall tool:
https://downloads.malwarebytes.com/file/mb_clean
16) If there are no BSOD for one week then you can reinstall Malwarebytes
15) Reinstall these drivers:
a) Intel chipset
b) Nvidia GPU
Challenge Page
Challenge Page
Challenge Page
16) After performing all of the above steps run the Dell diagnostics with custom tests:
Support for Inspiron 3847 | Diagnostics | Dell US
Performance
Bluescreen analyzer
Hard drive
Hard drive stress
Memory
Memory stress
Motherboard
Processor
Processor stress
System stress
Video capture
Video card
Video card stress
Take pictures with a camera or smartphone camera > post images into the thread
If there are any problems posting images please use share links: one drive, drop box, or google drive
17) These steps can be performed overnight:
a) HD Tune full error scan
b) Sea Tools for Windows long generic test
c) Dell diagnostics
It looks to me as if it is the same intel driver causing problems as in the earlier part of this thread.
iaStorE iaStorE.sys Fri Aug 3 19:31:07 2018 (5B649F6B)
Code:
Built by: 19041.1.amd64fre.vb_release.191206-1406
System Uptime: 0 days 8:01:11.762
BugCheck Info: IRQL_NOT_LESS_OR_EQUAL (a)
Bugcheck code 0000000A
Arguments:
Arg1: 0000000000000000, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000001, bitfield :
bit 0 : value 0 = read operation, 1 = write operation
bit 3 : value 0 = not an execute operation, 1 = execute operation (only on chips which support this level of status)
Arg4: fffff80671d4aeb3, address which referenced memory
*** WARNING: Unable to verify timestamp for iaStorE.sys
BUGCHECK_STR: AV
DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT
PROCESS_NAME: dwm.exe
Probably caused by: iaStorE.sys ( iaStorE+b3d07 )
FAILURE_BUCKET_ID: AV_iaStorE!unknown_function
MaxSpeed: 3200
CurrentSpeed: 3193
BiosVersion = A11
BiosReleaseDate = 05/07/2019
SystemManufacturer = Dell Inc.
SystemProductName = Inspiron 3847
BaseBoardProduct = 088DT1iaStorE iaStorE.sys Fri Aug 3 19:31:07 2018 (5B649F6B)
I'd remove iobit malware fighter and malwarebytes.
Windows PowerShell
Copyright (C) Microsoft Corporation. All rights reserved.
Try the new cross-platform PowerShell Installing PowerShell - PowerShell
PS C:\WINDOWS\system32> sfc /scannow
Beginning system scan. This process will take some time.
Beginning verification phase of system scan.
Verification 100% complete.
Windows Resource Protection did not find any integrity violations.
PS C:\WINDOWS\system32> dism /online/cleanup-image/scanhealth
Deployment Image Servicing and Management tool
Version: 10.0.19041.329
Error: 87
The online/cleanup-image/scanhealth option is unknown.
For more information, refer to the help by running DISM.exe /?.
The DISM log file can be found at C:\WINDOWS\Logs\DISM\dism.log
PS C:\WINDOWS\system32> dism /online /cleanup-image/scanhealth
Deployment Image Servicing and Management tool
Version: 10.0.19041.329
Image Version: 10.0.19041.508
Error: 87
The cleanup-image/scanhealth option is unknown.
For more information, refer to the help by running DISM.exe /?.
The DISM log file can be found at C:\WINDOWS\Logs\DISM\dism.log
PS C:\WINDOWS\system32> dism /online /cleanup-image /restorehealth
Deployment Image Servicing and Management tool
Version: 10.0.19041.329
Image Version: 10.0.19041.508
[==========================100.0%==========================] The restore operation completed successfully.
The operation completed successfully.
PS C:\WINDOWS\system32> dsim /online /cleanup-image /scanhealth
dsim : The term 'dsim' is not recognized as the name of a cmdlet, function, script file, or operable program. Check
the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:1
+ dsim /online /cleanup-image /scanhealth
+ ~~~~
+ CategoryInfo : ObjectNotFound: (dsim:String) [], CommandNotFoundException
+ FullyQualifiedErrorId : CommandNotFoundException
PS C:\WINDOWS\system32> dism /online /cleanup-image /scanhealth
Deployment Image Servicing and Management tool
Version: 10.0.19041.329
Image Version: 10.0.19041.508
[==========================100.0%==========================] No component store corruption detected.
The operation completed successfully.
PS C:\WINDOWS\system32> sfc /scannow
Beginning system scan. This process will take some time.
Beginning verification phase of system scan.
Verification 100% complete.
Windows Resource Protection did not find any integrity violations.
PS C:\WINDOWS\system32> chkdsk /scan
The type of the file system is NTFS.
Volume label is OS.
Stage 1: Examining basic file system structure ...
1051392 file records processed.
File verification completed.
Phase duration (File record verification): 53.78 seconds.
23162 large file records processed.
Phase duration (Orphan file record recovery): 0.00 milliseconds.
0 bad file records processed.
Phase duration (Bad file record checking): 0.66 milliseconds.
Stage 2: Examining file name linkage ...
96162 reparse records processed.
Found an unneeded link ($FILE_NAME: "PHCORE~3.LOG") in index "$I30" of directory "\Program Files (x86)\Dell Backup and Recovery\Components\Upgrade <0x7,0x31b5b>"
was not able to send command for self-healing due to lack of memory.
PS C:\WINDOWS\system32> wmic recoveros set autoreboot = false
Updating property(s) of '\\PLHOME\ROOT\CIMV2:Win32_OSRecoveryConfiguration.Name="Microsoft Windows 10 Home|C:\\WINDOWS|\\Device\\Harddisk0\\Partition5"'
Property(s) update successful.
PS C:\WINDOWS\system32> wmic revoveros DebugInfoType = 7
revoveros - Alias not found.
PS C:\WINDOWS\system32> wmic revoveros set DebugInfoType = 7
revoveros - Alias not found.
PS C:\WINDOWS\system32> wmic recoveros set DebugInfoType = 7
Updating property(s) of '\\PLHOME\ROOT\CIMV2:Win32_OSRecoveryConfiguration.Name="Microsoft Windows 10 Home|C:\\WINDOWS|\\Device\\Harddisk0\\Partition5"'
Property(s) update successful.
PS C:\WINDOWS\system32> wmic recoveros get autoreboot
AutoReboot
FALSE
PS C:\WINDOWS\system32> wmic recoveros get DebugInfoType
DebugInfoType
7
PS C:\WINDOWS\system32> bcdedit /enum {badmemory}
Invalid command line switch: /encodedCommand
Run "bcdedit /?" for command line assistance.
The parameter is incorrect.
PS C:\WINDOWS\system32> bcdedit /enum{badmemory}
Invalid command line switch: /encodedCommand
Run "bcdedit /?" for command line assistance.
The parameter is incorrect.
PS C:\WINDOWS\system32> bcdedit /enum (badmemory)
badmemory : The term 'badmemory' is not recognized as the name of a cmdlet, function, script file, or operable
program. Check the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:16
+ bcdedit /enum (badmemory)
+ ~~~~~~~~~
+ CategoryInfo : ObjectNotFound: (badmemory:String) [], CommandNotFoundException
+ FullyQualifiedErrorId : CommandNotFoundException
PS C:\WINDOWS\system32> bcdedit /enum badmemory
The specified entry type is invalid.
Run "bcdedit /?" for command line assistance.
The parameter is incorrect.
PS C:\WINDOWS\system32> bcdedit /?
BCDEDIT - Boot Configuration Data Store Editor
The Bcdedit.exe command-line tool modifies the boot configuration data store.
The boot configuration data store contains boot configuration parameters and
controls how the operating system is booted. These parameters were previously
in the Boot.ini file (in BIOS-based operating systems) or in the nonvolatile
RAM entries (in Extensible Firmware Interface-based operating systems). You can
use Bcdedit.exe to add, delete, edit, and append entries in the boot
configuration data store.
For detailed command and option information, type bcdedit.exe /? <command>. For
example, to display detailed information about the /createstore command, type:
bcdedit.exe /? /createstore
For an alphabetical list of topics in this help file, run "bcdedit /? TOPICS".
Commands that operate on a store
================================
/store Used to specify a BCD store other than the current system default.
/createstore Creates a new and empty boot configuration data store.
/export Exports the contents of the system store to a file. This file
can be used later to restore the state of the system store.
/import Restores the state of the system store using a backup file
created with the /export command.
/sysstore Sets the system store device (only affects EFI systems, does
not persist across reboots, and is only used in cases where
the system store device is ambiguous).
Commands that operate on entries in a store
===========================================
/copy Makes copies of entries in the store.
/create Creates new entries in the store.
/delete Deletes entries from the store.
/mirror Creates mirror of entries in the store.
Run bcdedit /? ID for information about identifiers used by these commands.
Commands that operate on entry options
======================================
/deletevalue Deletes entry options from the store.
/set Sets entry option values in the store.
Run bcdedit /? TYPES for a list of datatypes used by these commands.
Run bcdedit /? FORMATS for a list of valid data formats.
Commands that control output
============================
/enum Lists entries in the store.
/v Command-line option that displays entry identifiers in full,
rather than using names for well-known identifiers.
Use /v by itself as a command to display entry identifiers
in full for the ACTIVE type.
Running "bcdedit" by itself is equivalent to running "bcdedit /enum ACTIVE".
Commands that control the boot manager
======================================
/bootsequence Sets the one-time boot sequence for the boot manager.
/default Sets the default entry that the boot manager will use.
/displayorder Sets the order in which the boot manager displays the
multiboot menu.
/timeout Sets the boot manager time-out value.
/toolsdisplayorder Sets the order in which the boot manager displays
the tools menu.
Commands that control Emergency Management Services for a boot application
==========================================================================
/bootems Enables or disables Emergency Management Services
for a boot application.
/ems Enables or disables Emergency Management Services for an
operating system entry.
/emssettings Sets the global Emergency Management Services parameters.
Command that control debugging
==============================
/bootdebug Enables or disables boot debugging for a boot application.
/dbgsettings Sets the global debugger parameters.
/debug Enables or disables kernel debugging for an operating system
entry.
/hypervisorsettings Sets the hypervisor parameters.
Command that control remote event logging
=========================================
/eventsettings Sets the global remote event logging parameters.
/event Enables or disables remote event logging for an operating
system entry.
PS C:\WINDOWS\system32> bcdedit /enum
Windows Boot Manager
--------------------
identifier {bootmgr}
device partition=\Device\HarddiskVolume1
path \EFI\Microsoft\Boot\bootmgfw.efi
description Windows Boot Manager
locale en-US
inherit {globalsettings}
default {current}
resumeobject {0ae783f8-be58-11e9-aae5-ad332f3f3ee2}
displayorder {current}
toolsdisplayorder {memdiag}
timeout 30
Windows Boot Loader
-------------------
identifier {current}
device partition=C:
path \WINDOWS\system32\winload.efi
description Windows 10
locale en-US
inherit {bootloadersettings}
recoverysequence {0ae783fb-be58-11e9-aae5-ad332f3f3ee2}
displaymessageoverride Recovery
recoveryenabled Yes
isolatedcontext Yes
allowedinmemorysettings 0x15000075
osdevice partition=C:
systemroot \WINDOWS
resumeobject {0ae783f8-be58-11e9-aae5-ad332f3f3ee2}
nx OptIn
bootmenupolicy Standard
PS C:\WINDOWS\system32>
Item 11) bcedit enum {badmemory} could not get to work
Copyright (C) Microsoft Corporation. All rights reserved.
Try the new cross-platform PowerShell Installing PowerShell - PowerShell
PS C:\WINDOWS\system32> sfc /scannow
Beginning system scan. This process will take some time.
Beginning verification phase of system scan.
Verification 100% complete.
Windows Resource Protection did not find any integrity violations.
PS C:\WINDOWS\system32> dism /online/cleanup-image/scanhealth
Deployment Image Servicing and Management tool
Version: 10.0.19041.329
Error: 87
The online/cleanup-image/scanhealth option is unknown.
For more information, refer to the help by running DISM.exe /?.
The DISM log file can be found at C:\WINDOWS\Logs\DISM\dism.log
PS C:\WINDOWS\system32> dism /online /cleanup-image/scanhealth
Deployment Image Servicing and Management tool
Version: 10.0.19041.329
Image Version: 10.0.19041.508
Error: 87
The cleanup-image/scanhealth option is unknown.
For more information, refer to the help by running DISM.exe /?.
The DISM log file can be found at C:\WINDOWS\Logs\DISM\dism.log
PS C:\WINDOWS\system32> dism /online /cleanup-image /restorehealth
Deployment Image Servicing and Management tool
Version: 10.0.19041.329
Image Version: 10.0.19041.508
[==========================100.0%==========================] The restore operation completed successfully.
The operation completed successfully.
PS C:\WINDOWS\system32> dsim /online /cleanup-image /scanhealth
dsim : The term 'dsim' is not recognized as the name of a cmdlet, function, script file, or operable program. Check
the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:1
+ dsim /online /cleanup-image /scanhealth
+ ~~~~
+ CategoryInfo : ObjectNotFound: (dsim:String) [], CommandNotFoundException
+ FullyQualifiedErrorId : CommandNotFoundException
PS C:\WINDOWS\system32> dism /online /cleanup-image /scanhealth
Deployment Image Servicing and Management tool
Version: 10.0.19041.329
Image Version: 10.0.19041.508
[==========================100.0%==========================] No component store corruption detected.
The operation completed successfully.
PS C:\WINDOWS\system32> sfc /scannow
Beginning system scan. This process will take some time.
Beginning verification phase of system scan.
Verification 100% complete.
Windows Resource Protection did not find any integrity violations.
PS C:\WINDOWS\system32> chkdsk /scan
The type of the file system is NTFS.
Volume label is OS.
Stage 1: Examining basic file system structure ...
1051392 file records processed.
File verification completed.
Phase duration (File record verification): 53.78 seconds.
23162 large file records processed.
Phase duration (Orphan file record recovery): 0.00 milliseconds.
0 bad file records processed.
Phase duration (Bad file record checking): 0.66 milliseconds.
Stage 2: Examining file name linkage ...
96162 reparse records processed.
Found an unneeded link ($FILE_NAME: "PHCORE~3.LOG") in index "$I30" of directory "\Program Files (x86)\Dell Backup and Recovery\Components\Upgrade <0x7,0x31b5b>"
was not able to send command for self-healing due to lack of memory.
PS C:\WINDOWS\system32> wmic recoveros set autoreboot = false
Updating property(s) of '\\PLHOME\ROOT\CIMV2:Win32_OSRecoveryConfiguration.Name="Microsoft Windows 10 Home|C:\\WINDOWS|\\Device\\Harddisk0\\Partition5"'
Property(s) update successful.
PS C:\WINDOWS\system32> wmic revoveros DebugInfoType = 7
revoveros - Alias not found.
PS C:\WINDOWS\system32> wmic revoveros set DebugInfoType = 7
revoveros - Alias not found.
PS C:\WINDOWS\system32> wmic recoveros set DebugInfoType = 7
Updating property(s) of '\\PLHOME\ROOT\CIMV2:Win32_OSRecoveryConfiguration.Name="Microsoft Windows 10 Home|C:\\WINDOWS|\\Device\\Harddisk0\\Partition5"'
Property(s) update successful.
PS C:\WINDOWS\system32> wmic recoveros get autoreboot
AutoReboot
FALSE
PS C:\WINDOWS\system32> wmic recoveros get DebugInfoType
DebugInfoType
7
PS C:\WINDOWS\system32> bcdedit /enum {badmemory}
Invalid command line switch: /encodedCommand
Run "bcdedit /?" for command line assistance.
The parameter is incorrect.
PS C:\WINDOWS\system32> bcdedit /enum{badmemory}
Invalid command line switch: /encodedCommand
Run "bcdedit /?" for command line assistance.
The parameter is incorrect.
PS C:\WINDOWS\system32> bcdedit /enum (badmemory)
badmemory : The term 'badmemory' is not recognized as the name of a cmdlet, function, script file, or operable
program. Check the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:16
+ bcdedit /enum (badmemory)
+ ~~~~~~~~~
+ CategoryInfo : ObjectNotFound: (badmemory:String) [], CommandNotFoundException
+ FullyQualifiedErrorId : CommandNotFoundException
PS C:\WINDOWS\system32> bcdedit /enum badmemory
The specified entry type is invalid.
Run "bcdedit /?" for command line assistance.
The parameter is incorrect.
PS C:\WINDOWS\system32> bcdedit /?
BCDEDIT - Boot Configuration Data Store Editor
The Bcdedit.exe command-line tool modifies the boot configuration data store.
The boot configuration data store contains boot configuration parameters and
controls how the operating system is booted. These parameters were previously
in the Boot.ini file (in BIOS-based operating systems) or in the nonvolatile
RAM entries (in Extensible Firmware Interface-based operating systems). You can
use Bcdedit.exe to add, delete, edit, and append entries in the boot
configuration data store.
For detailed command and option information, type bcdedit.exe /? <command>. For
example, to display detailed information about the /createstore command, type:
bcdedit.exe /? /createstore
For an alphabetical list of topics in this help file, run "bcdedit /? TOPICS".
Commands that operate on a store
================================
/store Used to specify a BCD store other than the current system default.
/createstore Creates a new and empty boot configuration data store.
/export Exports the contents of the system store to a file. This file
can be used later to restore the state of the system store.
/import Restores the state of the system store using a backup file
created with the /export command.
/sysstore Sets the system store device (only affects EFI systems, does
not persist across reboots, and is only used in cases where
the system store device is ambiguous).
Commands that operate on entries in a store
===========================================
/copy Makes copies of entries in the store.
/create Creates new entries in the store.
/delete Deletes entries from the store.
/mirror Creates mirror of entries in the store.
Run bcdedit /? ID for information about identifiers used by these commands.
Commands that operate on entry options
======================================
/deletevalue Deletes entry options from the store.
/set Sets entry option values in the store.
Run bcdedit /? TYPES for a list of datatypes used by these commands.
Run bcdedit /? FORMATS for a list of valid data formats.
Commands that control output
============================
/enum Lists entries in the store.
/v Command-line option that displays entry identifiers in full,
rather than using names for well-known identifiers.
Use /v by itself as a command to display entry identifiers
in full for the ACTIVE type.
Running "bcdedit" by itself is equivalent to running "bcdedit /enum ACTIVE".
Commands that control the boot manager
======================================
/bootsequence Sets the one-time boot sequence for the boot manager.
/default Sets the default entry that the boot manager will use.
/displayorder Sets the order in which the boot manager displays the
multiboot menu.
/timeout Sets the boot manager time-out value.
/toolsdisplayorder Sets the order in which the boot manager displays
the tools menu.
Commands that control Emergency Management Services for a boot application
==========================================================================
/bootems Enables or disables Emergency Management Services
for a boot application.
/ems Enables or disables Emergency Management Services for an
operating system entry.
/emssettings Sets the global Emergency Management Services parameters.
Command that control debugging
==============================
/bootdebug Enables or disables boot debugging for a boot application.
/dbgsettings Sets the global debugger parameters.
/debug Enables or disables kernel debugging for an operating system
entry.
/hypervisorsettings Sets the hypervisor parameters.
Command that control remote event logging
=========================================
/eventsettings Sets the global remote event logging parameters.
/event Enables or disables remote event logging for an operating
system entry.
PS C:\WINDOWS\system32> bcdedit /enum
Windows Boot Manager
--------------------
identifier {bootmgr}
device partition=\Device\HarddiskVolume1
path \EFI\Microsoft\Boot\bootmgfw.efi
description Windows Boot Manager
locale en-US
inherit {globalsettings}
default {current}
resumeobject {0ae783f8-be58-11e9-aae5-ad332f3f3ee2}
displayorder {current}
toolsdisplayorder {memdiag}
timeout 30
Windows Boot Loader
-------------------
identifier {current}
device partition=C:
path \WINDOWS\system32\winload.efi
description Windows 10
locale en-US
inherit {bootloadersettings}
recoverysequence {0ae783fb-be58-11e9-aae5-ad332f3f3ee2}
displaymessageoverride Recovery
recoveryenabled Yes
isolatedcontext Yes
allowedinmemorysettings 0x15000075
osdevice partition=C:
systemroot \WINDOWS
resumeobject {0ae783f8-be58-11e9-aae5-ad332f3f3ee2}
nx OptIn
bootmenupolicy Standard
PS C:\WINDOWS\system32>
Item 11) bcedit enum {badmemory} could not get to work
1) Chkdsk /scan:
2) There are commands that work in administrative command prompt that do not work in administrative powershell.
The instructions were to use administrative command prompt.
Please run the bcdedit /enum {badmemory} command using administrative command prompt.
3) Open administrative command prompt and type or copy and paste:
chkdsk /r /v
This may take hours to run so plan to run overnight.
Run on all drives using the syntax: chkdsk /r /v C: or chkdsk /r /v D: changing the drive letter to the applicable drive.
C:\Windows\system32>chkdsk /r /v
The type of the file system is NTFS.
Cannot lock current drive.
Chkdsk cannot run because the volume is in use by another
process. Would you like to schedule this volume to be
checked the next time the system restarts? (Y/N)
Type: Y
reboot
4) Use the information in this link to find the chkdsk report in the event viewer.
Copy and paste into notepad > save to desktop > post into the thread using a one drive, drop box, or google drive share link:
Read Chkdsk Log in Event Viewer in Windows 10 Windows 10 Performance Maintenance Tutorials
Read Chkdsk Log in Event Viewer in Windows 10
5) Chkdsk /r /v C: can be ran overnight
Code:
Found an unneeded link ($FILE_NAME: "PHCORE~3.LOG") in index "$I30" of directory "\Program Files (x86)\Dell Backup and Recovery\Components\Upgrade <0x7,0x31b5b>"
was not able to send command for self-healing due to lack of memory.2) There are commands that work in administrative command prompt that do not work in administrative powershell.
The instructions were to use administrative command prompt.
Please run the bcdedit /enum {badmemory} command using administrative command prompt.
3) Open administrative command prompt and type or copy and paste:
chkdsk /r /v
This may take hours to run so plan to run overnight.
Run on all drives using the syntax: chkdsk /r /v C: or chkdsk /r /v D: changing the drive letter to the applicable drive.
C:\Windows\system32>chkdsk /r /v
The type of the file system is NTFS.
Cannot lock current drive.
Chkdsk cannot run because the volume is in use by another
process. Would you like to schedule this volume to be
checked the next time the system restarts? (Y/N)
Type: Y
reboot
4) Use the information in this link to find the chkdsk report in the event viewer.
Copy and paste into notepad > save to desktop > post into the thread using a one drive, drop box, or google drive share link:
Read Chkdsk Log in Event Viewer in Windows 10 Windows 10 Performance Maintenance Tutorials
Read Chkdsk Log in Event Viewer in Windows 10
5) Chkdsk /r /v C: can be ran overnight
Code:
Drive: C:
Free Space: 621.2 GB
Total Space: 937.3 GB
File System: NTFS
Model: WDC WD10EZEX-75M2NA0
Microsoft Windows [Version 10.0.19041.508]
(c) 2020 Microsoft Corporation. All rights reserved.
C:\WINDOWS\system32>bcdedit /enum {badmemory}
RAM Defects
-----------
identifier {badmemory}
C:\WINDOWS\system32>chkdsk /scan
The type of the file system is NTFS.
Volume label is OS.
Stage 1: Examining basic file system structure ...
1051392 file records processed.
File verification completed.
Phase duration (File record verification): 44.69 seconds.
23160 large file records processed.
Phase duration (Orphan file record recovery): 0.00 milliseconds.
0 bad file records processed.
Phase duration (Bad file record checking): 1.32 milliseconds.
Stage 2: Examining file name linkage ...
96169 reparse records processed.
1378422 index entries processed.
Index verification completed.
Phase duration (Index verification): 2.98 minutes.
1 unindexed files scanned.
Phase duration (Orphan reconnection): 0.00 milliseconds.
Found lost file "\Program Files (x86)\Dell Backup and Recovery\Components\Upgrade\PhCoreUpgrade.dll.20190323165057_0.log <0x720,0x170>"; requesting reconnection to index "$I30" of directory "\Program Files (x86)\Dell Backup and Recovery\Components\Upgrade <0x7,0x31b5b>"
... repaired online.
0 unindexed files recovered to lost and found.
Phase duration (Orphan recovery to lost and found): 22.59 milliseconds.
96169 reparse records processed.
Phase duration (Reparse point and Object ID verification): 282.52 milliseconds.
Stage 3: Examining security descriptors ...
Security descriptor verification completed.
Phase duration (Security descriptor verification): 1.76 seconds.
163516 data files processed.
Phase duration (Data attribute verification): 2.97 milliseconds.
CHKDSK is verifying Usn Journal...
Usn Journal verification completed.
Windows has found problems and some were fixed online;
the remaining problems must be fixed offline.
Please run "chkdsk /f" to fix the issues.
959787584 KB total disk space.
324398092 KB in 652976 files.
382516 KB in 163517 indexes.
0 KB in bad sectors.
1411660 KB in use by the system.
65536 KB occupied by the log file.
633595316 KB available on disk.
4096 bytes in each allocation unit.
239946896 total allocation units on disk.
158398829 allocation units available on disk.
Total duration: 3.91 minutes (234608 ms).
C:\WINDOWS\system32>
Still cannot ger bcdedit to run; is that the right format with {}?
(c) 2020 Microsoft Corporation. All rights reserved.
C:\WINDOWS\system32>bcdedit /enum {badmemory}
RAM Defects
-----------
identifier {badmemory}
C:\WINDOWS\system32>chkdsk /scan
The type of the file system is NTFS.
Volume label is OS.
Stage 1: Examining basic file system structure ...
1051392 file records processed.
File verification completed.
Phase duration (File record verification): 44.69 seconds.
23160 large file records processed.
Phase duration (Orphan file record recovery): 0.00 milliseconds.
0 bad file records processed.
Phase duration (Bad file record checking): 1.32 milliseconds.
Stage 2: Examining file name linkage ...
96169 reparse records processed.
1378422 index entries processed.
Index verification completed.
Phase duration (Index verification): 2.98 minutes.
1 unindexed files scanned.
Phase duration (Orphan reconnection): 0.00 milliseconds.
Found lost file "\Program Files (x86)\Dell Backup and Recovery\Components\Upgrade\PhCoreUpgrade.dll.20190323165057_0.log <0x720,0x170>"; requesting reconnection to index "$I30" of directory "\Program Files (x86)\Dell Backup and Recovery\Components\Upgrade <0x7,0x31b5b>"
... repaired online.
0 unindexed files recovered to lost and found.
Phase duration (Orphan recovery to lost and found): 22.59 milliseconds.
96169 reparse records processed.
Phase duration (Reparse point and Object ID verification): 282.52 milliseconds.
Stage 3: Examining security descriptors ...
Security descriptor verification completed.
Phase duration (Security descriptor verification): 1.76 seconds.
163516 data files processed.
Phase duration (Data attribute verification): 2.97 milliseconds.
CHKDSK is verifying Usn Journal...
Usn Journal verification completed.
Windows has found problems and some were fixed online;
the remaining problems must be fixed offline.
Please run "chkdsk /f" to fix the issues.
959787584 KB total disk space.
324398092 KB in 652976 files.
382516 KB in 163517 indexes.
0 KB in bad sectors.
1411660 KB in use by the system.
65536 KB occupied by the log file.
633595316 KB available on disk.
4096 bytes in each allocation unit.
239946896 total allocation units on disk.
158398829 allocation units available on disk.
Total duration: 3.91 minutes (234608 ms).
C:\WINDOWS\system32>
Still cannot ger bcdedit to run; is that the right format with {}?
Chkdsk /scan
The command worked properly.
There were no entries for bad RAM.
The CPU activity during the HD Tune drive testing was high.
Run HD Sentinel: (free or trial edition)
Hard Disk Sentinel - HDD health and temperature monitoring
Hard Disk Sentinel - HDD health and temperature monitoring
For each drive post images of these tabs into the thread:
Overview tab
Temperature
SMART
Disk performance
Code:
Windows has found problems and some were fixed online;
the remaining problems must be fixed offline.The command worked properly.
There were no entries for bad RAM.
The CPU activity during the HD Tune drive testing was high.
Run HD Sentinel: (free or trial edition)
Hard Disk Sentinel - HDD health and temperature monitoring
Hard Disk Sentinel - HDD health and temperature monitoring
For each drive post images of these tabs into the thread:
Overview tab
Temperature
SMART
Disk performance
Microsoft Windows [Version 10.0.19041.508]
(c) 2020 Microsoft Corporation. All rights reserved.
C:\WINDOWS\system32>bcdedit /enum {badmemory}
RAM Defects
-----------
identifier {badmemory}
C:\WINDOWS\system32>chkdsk /scan
The type of the file system is NTFS.
Volume label is OS.
Stage 1: Examining basic file system structure ...
1051392 file records processed.
File verification completed.
Phase duration (File record verification): 1.15 minutes.
23159 large file records processed.
Phase duration (Orphan file record recovery): 0.00 milliseconds.
0 bad file records processed.
Phase duration (Bad file record checking): 1.71 milliseconds.
Stage 2: Examining file name linkage ...
96174 reparse records processed.
1378482 index entries processed.
Index verification completed.
Phase duration (Index verification): 3.55 minutes.
0 unindexed files scanned.
Phase duration (Orphan reconnection): 8.45 seconds.
0 unindexed files recovered to lost and found.
Phase duration (Orphan recovery to lost and found): 0.98 milliseconds.
96174 reparse records processed.
Phase duration (Reparse point and Object ID verification): 266.66 milliseconds.
Stage 3: Examining security descriptors ...
Security descriptor verification completed.
Phase duration (Security descriptor verification): 4.37 seconds.
163546 data files processed.
Phase duration (Data attribute verification): 2.67 milliseconds.
CHKDSK is verifying Usn Journal...
40551216 USN bytes processed.
Usn Journal verification completed.
Phase duration (USN journal verification): 1.47 seconds.
Windows has found problems that must be fixed offline.
Please run "chkdsk /f" to fix the issues.
959787584 KB total disk space.
325591920 KB in 653335 files.
382544 KB in 163547 indexes.
0 KB in bad sectors.
1451596 KB in use by the system.
65536 KB occupied by the log file.
632361524 KB available on disk.
4096 bytes in each allocation unit.
239946896 total allocation units on disk.
158090381 allocation units available on disk.
Total duration: 4.94 minutes (296966 ms).
C:\WINDOWS\system32>
(c) 2020 Microsoft Corporation. All rights reserved.
C:\WINDOWS\system32>bcdedit /enum {badmemory}
RAM Defects
-----------
identifier {badmemory}
C:\WINDOWS\system32>chkdsk /scan
The type of the file system is NTFS.
Volume label is OS.
Stage 1: Examining basic file system structure ...
1051392 file records processed.
File verification completed.
Phase duration (File record verification): 1.15 minutes.
23159 large file records processed.
Phase duration (Orphan file record recovery): 0.00 milliseconds.
0 bad file records processed.
Phase duration (Bad file record checking): 1.71 milliseconds.
Stage 2: Examining file name linkage ...
96174 reparse records processed.
1378482 index entries processed.
Index verification completed.
Phase duration (Index verification): 3.55 minutes.
0 unindexed files scanned.
Phase duration (Orphan reconnection): 8.45 seconds.
0 unindexed files recovered to lost and found.
Phase duration (Orphan recovery to lost and found): 0.98 milliseconds.
96174 reparse records processed.
Phase duration (Reparse point and Object ID verification): 266.66 milliseconds.
Stage 3: Examining security descriptors ...
Security descriptor verification completed.
Phase duration (Security descriptor verification): 4.37 seconds.
163546 data files processed.
Phase duration (Data attribute verification): 2.67 milliseconds.
CHKDSK is verifying Usn Journal...
40551216 USN bytes processed.
Usn Journal verification completed.
Phase duration (USN journal verification): 1.47 seconds.
Windows has found problems that must be fixed offline.
Please run "chkdsk /f" to fix the issues.
959787584 KB total disk space.
325591920 KB in 653335 files.
382544 KB in 163547 indexes.
0 KB in bad sectors.
1451596 KB in use by the system.
65536 KB occupied by the log file.
632361524 KB available on disk.
4096 bytes in each allocation unit.
239946896 total allocation units on disk.
158090381 allocation units available on disk.
Total duration: 4.94 minutes (296966 ms).
C:\WINDOWS\system32>
Has Sysnative Forums helped you? Please consider donating to help us support the site!