[SOLVED] BSOD 0x00000109 Windows 10 Upgrade (from Windows 7)

C

ComboZz

New member
Joined
Nov 19, 2019
Posts
3
Hey Guys,

I need your help.
I Upgraded a PC to Windows 10 and now im getting random the same Bluescreen (0x00000109).
Sometimes the PC runs for hours and sometimes only for minutes.
I already Updated every Driver possible, scanned for Adware, tested the HDD and RAM, checked the system files, the filesystem and did an Inplace Upgrade.
The Driver Verifier complained an Card Reader Driver. After Updating that Driver the Driver Verifier ran without Problems. But i still get the same Bluescreen.
Analysing the Dump Files didn´t get me any further.
I attached some Dump Files and the Driver Verifier Dump File.

It would be nice if someone can have a look :)
 

Attachments

Hi. . .

Update this driver - Driver Reference Table (DRT) | netfilter2.sys

... and this driver too - Driver Reference Table (DRT) | RtsUer.sys

Both of those were from VERIFIER_ENABLED dumps (flagged by Driver Verifier).

The 3rd dump had bugcheck 0x109 - kernel corruption. No 3rd party driver was named.

Update those two drivers and see how things go.

Keep in mind that your Fujitsu system does not support Windows 10.

The BIOS is dated 2009 and I doubt that there are any updates for it. You can check Fujitsu support though.

Regards. . .

jcgriff2
 
Thank you guys for your responds :)
I just Updated the Drivers and removed the SPTD.sys with the tool.
I will test it now and give a you a feedback if it worked tomorrow.
 
I tested the system for 24 hours now and it had no Bluescreen!!
It seems like it was the SPTD.sys
Thank you both so much for your effort and your help :)
 
Great news!

Thank you for posting back with your solution - much appreciated.

Regards. . .

jcgriff2
 

Has Sysnative Forums helped you? Please consider donating to help us support the site!

Back
Top