The Code 32 error will almost always display in the following way:
Code 32 errors are usually caused when the start type for the hardware device's driver is disabled in the registry.
How to Fix a Code 32 Error
1. Did you install a device or make a change in Device Manager just before the Code 32 error appeared? If so, it's likely that the change you made caused the Code 32 error. Undo the change if you can, restart your computer, and then check again for the Code 32 error.
2. Roll back the driver to a version prior to your update.
3. Use System Restore to undo recent Device Manager related changes.
4. Delete the
UpperFilters and
LowerFilters Registry Values.
A few of the more common Device Manager error codes that are often caused by
UpperFilters and
LowerFilters issues include Code 19, Code 31, Code 32, Code 37, Code 39, and Code 41.
Removing the
UpperFilters and
LowerFilters values in the Windows Registry is easy.
1. Press the
keys to open
Run box, then type
regedit in the Run box. This will open
Registry Editor.
2. Expand the "folders" until you reach the
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class registry key.
3. Tap or click on the > or + icon next to the Class key to expand it. You should see a long list of subkeys open up under Class that look something like this: {4D36E965-E325-11CE-BFC1-08002BE10318}.
Each 32-digit subkey is unique and corresponds to a particular type, or class, of hardware in Device Manager.
4. Determine the Correct Class GUID for the Hardware Device. Using this list, find the correct Class GUID corresponding to the type of hardware that you're seeing the Device Manager error code for. For example, let's say your DVD drive is showing a Code 32 error in Device Manager. According to the list above, the GUID for CD/DVD devices is 4D36E965-E325-11CE-BFC1-08002BE10318.
Once you know this GUID, you can continue to Step: 5.
5. Click the registry subkey corresponding to the device's Class GUID that you determined in the last step.
6. In the results that appear on the window on the right, locate the
UpperFilters and
LowerFilters values.
If you don't see either registry values listed, this solution isn't for you
7. Right-click or tap-and-hold on
UpperFilters and choose Delete.
8. Repeat Step: 7 with the
LowerFilters value.
9. Close Registry Editor.
10. Restart your computer.
11. Check to see if deleting the
UpperFilters and
LowerFilters registry values solved your problem.
