Hello, I’m desperately trying to upgrade from Win 7 Pro (32 bit) to Windows 10 Pro. I’ve tried different things (starting from minimal Win, take off all unnecessary programs, trying several updates from the media creation tools, the Win 10 Iso disk, with and without network. The result is always the same, I have a black screen at around 27-30 % of the update process and everything is blocked, then when I cancel the process (by switching of power) and come back to Win 7 I have the “ Error - FIRST_BOOT: 0xC1900101 - 0x30017 code and the message (in French but similar to) The installation failed in the FIRST_ BOOT phase with an error during BOOT operation.
I have done all the Win 7 updates I could do (although I can’t succeed updating a few of them : KB 4524752 and KB4516065 fail to install ) and update drivers with DevID Agent.
My PC is a Fujitsu Siemens Esprimo P710.
I have just done sfc/scannow and “Windows Resource Protection did not find any integrity violations”
Nothing special after SURT/DISM Scan
I have runed SFCFix (see below)
I would be grateful if you could bring me some help. Thank you very much.
SFCFix version 3.0.2.1 by niemiro.
Start time: 2020-01-09 16:14:51.067
Microsoft Windows 7 Service Pack 1 - x86
Not using a script file.
AutoAnalysis::
SUMMARY: Some corruptions could not be fixed automatically. Seek advice from helper or sysnative.com.
CBS & SFC total detected corruption count: 0
CBS & SFC total unimportant corruption count: 0
CBS & SFC total fixed corruption count: 0
SURT total detected corruption count: 4
SURT total unimportant corruption count: 0
SURT total fixed corruption count: 0
AutoAnalysis:: directive completed successfully.
Successfully processed all directives.
Failed to generate a complete zip file. Upload aborted.
SFCFix version 3.0.2.1 by niemiro has completed.
Currently storing 0 datablocks.
Finish time: 2020-01-09 16:21:08.744
----------------------EOF----------------------
link to the CBS log file :
CBS.zip
I have done all the Win 7 updates I could do (although I can’t succeed updating a few of them : KB 4524752 and KB4516065 fail to install ) and update drivers with DevID Agent.
My PC is a Fujitsu Siemens Esprimo P710.
I have just done sfc/scannow and “Windows Resource Protection did not find any integrity violations”
Nothing special after SURT/DISM Scan
I have runed SFCFix (see below)
I would be grateful if you could bring me some help. Thank you very much.
SFCFix version 3.0.2.1 by niemiro.
Start time: 2020-01-09 16:14:51.067
Microsoft Windows 7 Service Pack 1 - x86
Not using a script file.
AutoAnalysis::
SUMMARY: Some corruptions could not be fixed automatically. Seek advice from helper or sysnative.com.
CBS & SFC total detected corruption count: 0
CBS & SFC total unimportant corruption count: 0
CBS & SFC total fixed corruption count: 0
SURT total detected corruption count: 4
SURT total unimportant corruption count: 0
SURT total fixed corruption count: 0
AutoAnalysis:: directive completed successfully.
Successfully processed all directives.
Failed to generate a complete zip file. Upload aborted.
SFCFix version 3.0.2.1 by niemiro has completed.
Currently storing 0 datablocks.
Finish time: 2020-01-09 16:21:08.744
----------------------EOF----------------------
link to the CBS log file :
CBS.zip
Last edited: