C Clems Member Joined Apr 30, 2020 Posts 11 Apr 30, 2020 #1 Hi all! Due to my mistake I am not able to perform the last update of my 7 ether to upgrade on W10. Few weeks ago I decided to save disk space by removing some drivers and "kb", and today thoose files are clearly missing to Windows Update to perform. I attach you some log files... And CBS.log MyAirBridge.com | Send or share big files up to 20 GiB for free Thank you in advance ! Attachments SFCFix.txt 1.8 KB · Views: 1 CheckSUR.log 155.7 KB · Views: 2
Hi all! Due to my mistake I am not able to perform the last update of my 7 ether to upgrade on W10. Few weeks ago I decided to save disk space by removing some drivers and "kb", and today thoose files are clearly missing to Windows Update to perform. I attach you some log files... And CBS.log MyAirBridge.com | Send or share big files up to 20 GiB for free Thank you in advance !
P PeterJ Moderator, Windows Update Expert, Security Analyst Staff member Joined Dec 14, 2014 Posts 12,644 Apr 30, 2020 #2 Hello and welcome, Follow the instructions below please. WARNING! The following fix is specific to the user's system in this thread only. No one else should follow these instructions, as it could damage your system. Download the attachment SFCFix.zip and save it on your desktop. Save any work you have open, and close all programs. Drag the SFCFix.zip file over the SFCFix.exe executable and release it. SFCFix will launch, let it complete. Once done, a file will appear on your desktop, called SFCFix.txt. Attach that file to your next reply. Attachments SFCFix.zip 5.7 MB · Views: 2
Hello and welcome, Follow the instructions below please. WARNING! The following fix is specific to the user's system in this thread only. No one else should follow these instructions, as it could damage your system. Download the attachment SFCFix.zip and save it on your desktop. Save any work you have open, and close all programs. Drag the SFCFix.zip file over the SFCFix.exe executable and release it. SFCFix will launch, let it complete. Once done, a file will appear on your desktop, called SFCFix.txt. Attach that file to your next reply.
C Clems Member Joined Apr 30, 2020 Posts 11 May 1, 2020 #3 Hi ! Thank you very much PeterJ! I attached the report; Thx again Attachments SFCFix.txt 543.7 KB · Views: 1
C Clems Member Joined Apr 30, 2020 Posts 11 May 1, 2020 #4 And a new CheckSUR log I did after using your fix. Attachments CheckSUR.log 41.5 KB · Views: 1
C Clems Member Joined Apr 30, 2020 Posts 11 May 1, 2020 #5 Hi, I used the tool Windows6.1-KB947821-v34-x64, And restart the computer. kb4534310 is still not able to be instaled; Attached the last logs. CBS.log: MyAirBridge.com | Send or share big files up to 20 GiB for free ClĂ©ment Attachments SFCFix.txt 1.7 KB · Views: 1 CheckSUR.log 40.9 KB · Views: 1
Hi, I used the tool Windows6.1-KB947821-v34-x64, And restart the computer. kb4534310 is still not able to be instaled; Attached the last logs. CBS.log: MyAirBridge.com | Send or share big files up to 20 GiB for free Clément
P PeterJ Moderator, Windows Update Expert, Security Analyst Staff member Joined Dec 14, 2014 Posts 12,644 May 1, 2020 #6 Please do not post multiple messages in a row. It's confusing. Follow the instructions below please. WARNING! The following fix is specific to the user's system in this thread only. No one else should follow these instructions, as it could damage your system. Download the attachment SFCFix.zip and save it on your desktop. Save any work you have open, and close all programs. Drag the SFCFix.zip file over the SFCFix.exe executable and release it. SFCFix will launch, let it complete. Once done, a file will appear on your desktop, called SFCFix.txt. Attach that file to your next reply. Attachments SFCFix.zip 4.6 MB · Views: 1
Please do not post multiple messages in a row. It's confusing. Follow the instructions below please. WARNING! The following fix is specific to the user's system in this thread only. No one else should follow these instructions, as it could damage your system. Download the attachment SFCFix.zip and save it on your desktop. Save any work you have open, and close all programs. Drag the SFCFix.zip file over the SFCFix.exe executable and release it. SFCFix will launch, let it complete. Once done, a file will appear on your desktop, called SFCFix.txt. Attach that file to your next reply.
C Clems Member Joined Apr 30, 2020 Posts 11 May 1, 2020 #7 Hi again ! Here is the new log. Thank you ! Attachments SFCFix.txt 250 KB · Views: 1
P PeterJ Moderator, Windows Update Expert, Security Analyst Staff member Joined Dec 14, 2014 Posts 12,644 May 1, 2020 #8 Start the System Update Readiness Tool (SURT) again. On completion, attach the logfile C:\Windows\Logs\CBS\CheckSUR.log in your next reply.
Start the System Update Readiness Tool (SURT) again. On completion, attach the logfile C:\Windows\Logs\CBS\CheckSUR.log in your next reply.
C Clems Member Joined Apr 30, 2020 Posts 11 May 1, 2020 #9 Logs are quite ok but still not possible to install the update... Attachments SFCFix.txt 954 bytes · Views: 1 CheckSUR.log 372 bytes · Views: 2
P PeterJ Moderator, Windows Update Expert, Security Analyst Staff member Joined Dec 14, 2014 Posts 12,644 May 1, 2020 #10 Attach the zipped cbs.log to your next reply.
C Clems Member Joined Apr 30, 2020 Posts 11 May 1, 2020 #11 Here is the CBS : MyAirBridge.com | Send or share big files up to 20 GiB for free
P PeterJ Moderator, Windows Update Expert, Security Analyst Staff member Joined Dec 14, 2014 Posts 12,644 May 1, 2020 #12 Remove Update Manually Click on the Start button and in the search box, type Command Prompt. When you see Command Prompt on the list, right-click on it and select Run as administrator. When command prompt opens, copy and paste the following command into it, then press enter. wusa /uninstall /KB:4457139 Let me know if it says it was successful or if there are any errors.
Remove Update Manually Click on the Start button and in the search box, type Command Prompt. When you see Command Prompt on the list, right-click on it and select Run as administrator. When command prompt opens, copy and paste the following command into it, then press enter. wusa /uninstall /KB:4457139 Let me know if it says it was successful or if there are any errors.
C Clems Member Joined Apr 30, 2020 Posts 11 May 1, 2020 #13 PeterJ said: Remove Update Manually Click on the Start button and in the search box, type Command Prompt. When you see Command Prompt on the list, right-click on it and select Run as administrator. When command prompt opens, copy and paste the following command into it, then press enter. wusa /uninstall /KB:4457139 Let me know if it says it was successful or if there are any errors. Click to expand... It said the upadte KB:4457139 is not installed on this computer. And if I try to install it from Microsoft Catalog 2018-09 Preview of Monthly Quality Rollup for Windows 7 for x64-based Systems (KB4457139) it says the update is not applicable to my computer. Last edited: May 1, 2020
PeterJ said: Remove Update Manually Click on the Start button and in the search box, type Command Prompt. When you see Command Prompt on the list, right-click on it and select Run as administrator. When command prompt opens, copy and paste the following command into it, then press enter. wusa /uninstall /KB:4457139 Let me know if it says it was successful or if there are any errors. Click to expand... It said the upadte KB:4457139 is not installed on this computer. And if I try to install it from Microsoft Catalog 2018-09 Preview of Monthly Quality Rollup for Windows 7 for x64-based Systems (KB4457139) it says the update is not applicable to my computer.
P PeterJ Moderator, Windows Update Expert, Security Analyst Staff member Joined Dec 14, 2014 Posts 12,644 May 1, 2020 #14 Do NOT try to install it. FRST Registry Search Click the Start button and choose Control Panel. In the upper right corner ensure the View by: is set to Category. Select the Programs group. Click the Turn Windows features on or off link. This will bring up the Server Manager dialog. Note: This loads your components hive which is what we want. Please keep this dialog open while you perform the remaining steps. You can minimize it if you wish but keep it open. Download the Farbar Recovery Scan Tool and save it to your Desktop: 64-bit: Downloading Farbar Recovery Scan Tool Right-click on the file FRST64.exe and choose Run as administrator. Copy and paste KB4457139 into the Search box and click the Search Registry button. When the scan is complete, a message will display that 'SearchReg.txt' is saved in the same folder FRST was started from. Notepad will open this file also. Close Notepad and attach the file 'SearchReg.txt' to your next reply. You may close any remaining open windows now.
Do NOT try to install it. FRST Registry Search Click the Start button and choose Control Panel. In the upper right corner ensure the View by: is set to Category. Select the Programs group. Click the Turn Windows features on or off link. This will bring up the Server Manager dialog. Note: This loads your components hive which is what we want. Please keep this dialog open while you perform the remaining steps. You can minimize it if you wish but keep it open. Download the Farbar Recovery Scan Tool and save it to your Desktop: 64-bit: Downloading Farbar Recovery Scan Tool Right-click on the file FRST64.exe and choose Run as administrator. Copy and paste KB4457139 into the Search box and click the Search Registry button. When the scan is complete, a message will display that 'SearchReg.txt' is saved in the same folder FRST was started from. Notepad will open this file also. Close Notepad and attach the file 'SearchReg.txt' to your next reply. You may close any remaining open windows now.
C Clems Member Joined Apr 30, 2020 Posts 11 May 1, 2020 #15 Thanks ! Attached the SearchReg.txt and the last CBS.log zipped MyAirBridge.com | Send or share big files up to 20 GiB for free Attachments SearchReg.txt 1.5 MB · Views: 1
Thanks ! Attached the SearchReg.txt and the last CBS.log zipped MyAirBridge.com | Send or share big files up to 20 GiB for free
P PeterJ Moderator, Windows Update Expert, Security Analyst Staff member Joined Dec 14, 2014 Posts 12,644 May 1, 2020 #16 Don't post a file that is not requested. Step 1: Warning: This script was written specifically for this user, for use on that particular machine. Do not run this script on another machine. Download the attachment fixlist.txt and save it to your desktop. Right-click on FRST64.exe and select "Run as administrator". Press the Fix button. The tool will now process fixlist.txt. If for some reason the tool needs a restart, please make sure you let the system restart normally. After that let the tool complete its run. When finished, a log called Fixlog.txt will appear in the same directory the tool is run from. Post the logfile Fixlog.txt as attachment in your next reply. Step 2: Restart the computer. Check Windows Update again and report the result. If it fails, attach the zipped cbs.log to your next reply. Attachments fixlist.txt 1.4 MB · Views: 1 Last edited: May 1, 2020
Don't post a file that is not requested. Step 1: Warning: This script was written specifically for this user, for use on that particular machine. Do not run this script on another machine. Download the attachment fixlist.txt and save it to your desktop. Right-click on FRST64.exe and select "Run as administrator". Press the Fix button. The tool will now process fixlist.txt. If for some reason the tool needs a restart, please make sure you let the system restart normally. After that let the tool complete its run. When finished, a log called Fixlog.txt will appear in the same directory the tool is run from. Post the logfile Fixlog.txt as attachment in your next reply. Step 2: Restart the computer. Check Windows Update again and report the result. If it fails, attach the zipped cbs.log to your next reply.
C Clems Member Joined Apr 30, 2020 Posts 11 May 1, 2020 #17 Thank you, you fix it! The last update of 7 is now installed! Now I will tray to upgrade to 10... Many thanks Attachments Fixlog.txt 2.9 MB · Views: 0
Thank you, you fix it! The last update of 7 is now installed! Now I will tray to upgrade to 10... Many thanks
P PeterJ Moderator, Windows Update Expert, Security Analyst Staff member Joined Dec 14, 2014 Posts 12,644 May 1, 2020 #18 Great. Can we close this thread or just wait for the upgrade result ?
C Clems Member Joined Apr 30, 2020 Posts 11 May 1, 2020 #19 I'm now on W10, thank you so much! I will donate for the website.
P PeterJ Moderator, Windows Update Expert, Security Analyst Staff member Joined Dec 14, 2014 Posts 12,644 May 1, 2020 #20 Well done. Thank you for the donation. I will mark this thread as solved. Take care.