0xc000000f error has led me here.

[hejhej]

The other day I was updating my graphics card (MSI RX Vega 56) drivers via AMDs latest radeon software (My previous software was acting buggy/frozen so i downloaded the recent version on their website) after running the software and letting it update and download and install the new drivers it asked to restart the computer to finish the install. Usually it restarts fine but this time it says that windows did not shut down correctly and I tried to repair it, after the repair in which nothing was fixed IIRC and i selected the 'start windows as normal' option a loud whine came from the graphics card. so i turned off the computer after the screen had remained black. I am then met with the 0xc000000f error in loop but I am able to sometimes get windows to boot selecting my SSD via the f11 key, but the problem will come back when restarted (with or without the grapchics card in, i noticed it is not recognized as RX vega 56 no longer in programs like speccy or MSI Afterburner, i am not sure if this is because the drivers failed to install or the card is dead though it still runs and powers on, I do not have another computer to try the card out on). I have been searching through the internet and youtube videos trying to find a fix and saw a mention to try SFCfix. Is my graphics card just broken now after trying to update it? It was running games fine, I was orginally updating the drivers to try and fix CoD:coldwar crash errors.

Anyway here are my results from SFCfix, any tips appreciated, I have not had a computer problem like this in many many years and am left confused. I mistakenly do not have a restore point saved.

SFCFix version 3.0.2.1 by niemiro.
Start time: 2021-02-20 06:17:35.629
Microsoft Windows 7 Service Pack 1 - amd64
Not using a script file.


AutoAnalysis::
CORRUPT: C:\Windows\winsxs\x86_microsoft-windows-ime-korean-hwresource_31bf3856ad364e35_6.1.7600.16385_none_502bcdd40d7e6385\mshwkorrIME.dll


SUMMARY: Some corruptions could not be fixed automatically. Seek advice from helper or sysnative.com.
CBS & SFC total detected corruption count: 1
CBS & SFC total unimportant corruption count: 0
CBS & SFC total fixed corruption count: 0
SURT total detected corruption count: 0
SURT total unimportant corruption count: 0
SURT total fixed corruption count: 0
AutoAnalysis:: directive completed successfully.




Successfully processed all directives.
SFCFix version 3.0.2.1 by niemiro has completed.
Currently storing 0 datablocks.
Finish time: 2021-02-20 06:22:58.665
----------------------EOF-----------------------


other videos and links I have been looking at are as follows:

Solved: Your PC Needs to Be Repaired 0xc000000f on Windows 10/8/7

Thank you

 

[PeterJ]

Hello and welcome,

Follow the instructions below please.

Step 1:
WARNING! The following fix is specific to the user's system in this thread only. No one else should follow these instructions, as it could damage your system.

• Download the attachment SFCFix.zip and save it on your desktop.
• Save any work you have open, and close all programs.
• Drag the SFCFix.zip file over the SFCFix.exe executable and release it.
  
  
• SFCFix will launch, let it complete.
• Once done, a file will appear on your desktop, called SFCFix.txt.
• Open the file, then copy and paste its content in your next reply.

Step 2:

1. Download the Farbar Recovery Scan Tool and save it to your Desktop:
   64-bit: Downloading Farbar Recovery Scan Tool
2. Right-click to run the tool as administrator. When the tool opens click Yes to disclaimer.
3. Note: Ensure that the Addition.txt check box is checked at the bottom of the form within the Optional Scan area.
4. Press the Scan button.
5. Please wait for the tool to finish. It will produce two logfiles called FRST.txt and Addition.txt in the same directory the tool is run from (which should be the desktop)
6. Post the logfiles FRST.txt and Addition.txt as attachment in your next reply.

 

[hejhej]

well i got the computer to start up like normal after unplugging my harddrives except the windows one and making sure the boot order was correct in BIOS. i think the order got messed up when i shut off the computer after the card was being loud and was whining as the monitor remained black when turned on. so that turned out to be a simple fix.

then after that I think I got everything working. I just installed an older version of the AMD software/drivers that was saved on the computer already. played a quick play in call of duty and it was fine. both monitors work but the same error happens at the end of call of duty matches. Although I cannot seem to create a system restore point just in case, so I assume there may be problems still going on with windows?

Here is my SFCfix log

 

[PeterJ]

The latest attachment is the same as in your first post.
Perform both steps in message #2 again.