BSOD assistance

hfc.t3ch83 · Mar 16, 2013

I am able to login without issues using safemode but everytime I attemp to boot normally I get a BSOD. Attached are the files.

View attachment System Info.docx . .View attachment 3596

writhziden · Mar 16, 2013

Recommendations:

Did problems start before or after installing the PC Optimizer Pro software?

I do not recommend 3rd party optimization software, especially if it includes registry cleaning. Such software can lead to Windows being unable to boot, damaged restore points, a damaged file system, damaged Windows files, damaged program files, corrupted registry and program installations, and eventually leads to the need to clean install Windows to fix the damage caused by the 3rd party "optimization" algorithms. I would recommend that you remove the software and avoid such software in the future. Hopefully it is not already too late.

In the future, if you need help optimizing Windows 7, please follow the steps given by Microsoft Windows developers to Optimize Windows 7 for better performance.

Uninstall or change a program

Optimize Windows 7 for better performance

The Assumptions You Make About Your Slow PC (and Why They're Probably Wrong)

Code:

Start Menu\Programs\PC Optimizer Pro

Almost all crashes were caused by your storage port driver from AMD.

amd_xata.sys Fri Apr 15 12:37:17 2011 (4DA8905D)
AMD Stor Filter Driver
http://www.carrona.org/drivers/driver.php?id=amd_xata.sys

Crashes point primarily to a hard drive related problem. This could mean hard disk corruption, bad sectors, a failing hard disk, Windows files or registry corruption or damage from using registry cleaning tools, viruses, or memory problems.

If you are overclocking any hardware, please stop.
Run Disk Check with both boxes checked for all HDDs. Post back your logs for the checks after finding them using Event Viewer. In Event Viewer, expand Windows Logs, click Application to let it load, right click Application and click Find.... Search for chkdsk or wininit to find the logs.
For any drives that do not give the message that no problems were found, run the disk check again. You do not want the message shown in red below. You do want the message shown in blue below.

Windows has checked the file system and found no problems
Windows has made corrections to the file system

Some helpful links:

Check a drive for errors

Open Event Viewer
Run all Basic tests with SeaTools: S.M.A.R.T. Check, Short Drive Self Test, Drive Information, Short Generic, and Long Generic. Run the tests for all HDDs.

SeaTools for Windows

SeaTools for DOS

Hard Drive (HDD) Diagnostics

Bootable Hard Drive Diagnostics
Run a system file check to check Windows for corruption:
1. Click Start Menu
2. Click All Programs
3. Click Accessories
4. Right click Command Prompt
5. Click Run as administrator
6. Type
  Code:
```
sfc /scannow
```
  and press Enter
7. Once it is complete, make note of the message. If it says Windows Resource Protection did not find any integrity violations., restart your computer and post back
8. If the message does not say Windows Resource Protection did not find any integrity violations., restart your computer and do steps 1-6 again.
9. You may need to do steps 1-6 up to three times with a restart in between each run to resolve all corrupted files.
10. If you still have corrupted files after a fourth run, post back here with the following:
  - Click Start Menu
  - Click Computer
  - Open your C: drive
  - Open Windows
  - Open Logs
  - Open CBS
  - Copy and paste CBS.log or CBS (it may not have the log extension) to a location you will remember.
  - Compress (zip) the CBS file and attach the .zip file to your next post.
Download and install Malwarebytes, update it, do not start the free trial, and then run a full scan. Also run a full scan with your antivirus software installed on your system. If you do not have antivirus software installed, I recommend:
- Microsoft Security Essentials coupled with Malwarebytes. Do not start the free trial of Malwarebytes. Just use the standalone version, update it, and scan your computer once a week with Malwarebytes and with Microsoft Security Essentials.
  
  Malwarebytes : Free anti-malware download
  
  Microsoft Security Essentials - Microsoft Windows
Make sure to update the security software before running the full scan.
Run Memtest86+ for at least 7-10 passes. It may take up to 22 passes to find problems. Make sure to run it once after the system has been on for a few hours and is warm, and then also run it again when the system has been off for a few hours and is cold.

Test RAM With Memtest86+

Also, in case Memtest86+ misses anything and comes up with no errors, run the extended version of the Windows Memory Diagnostics Tool for at least five passes. You may want to run both Memtest86+ and the Windows Memory Diagnostics Tool overnight since they take a long time to complete (run them an hour before bed each of the next two nights and check before going to sleep that they are still running).

Diagnosing memory problems on your computer

If problem occurred after installing the PC Optimizer Pro software, backup important files, and then reset the system to its factory condition.

Performing an HP System Recovery (Windows 7) | HP® Support

3rd Party Drivers:

The following is for information purposes only. My recommendations were given above. The drivers that follow belong to software or devices that were not developed by Microsoft. Any drivers in red should be updated/replaced/removed. You can find links to the driver information and where to update the drivers in the section after the code box:

Code:

**************************Sat Mar 16 17:34:27.761 2013 (UTC - 6:00)**************************
mfehidk.sys                 Wed Aug  5 09:48:42 2009 (4A79A9DA)
mfetdik.sys                 Wed Aug  5 09:48:49 2009 (4A79A9E1)
mfeapfk.sys                 Wed Aug  5 09:49:17 2009 (4A79A9FD)
mfeavfk.sys                 Wed Aug  5 09:49:52 2009 (4A79AA20)
amdsata.sys                 Thu Mar 18 18:45:17 2010 (4BA2C91D)
amdxata.sys                 Fri Mar 19 10:18:18 2010 (4BA3A3CA)
AtihdW76.sys                Wed Nov 17 05:02:04 2010 (4CE3C43C)
RtsUStor.sys                Wed Dec  1 00:46:14 2010 (4CF5FD46)
btmusb.sys                  Wed Mar 23 02:08:22 2011 (4D89AA76)
amd_sata.sys                Fri Apr 15 12:37:14 2011 (4DA8905A)
amd_xata.sys                Fri Apr 15 12:37:17 2011 (4DA8905D)
netr28x.sys                 Mon Apr 18 21:31:37 2011 (4DAD0219)
Accelerometer.sys           Fri May 13 12:47:02 2011 (4DCD7CA6)
hpdskflt.sys                Fri May 13 12:47:02 2011 (4DCD7CA6)
Rt64win7.sys                Fri Jun 10 00:33:15 2011 (4DF1BAAB)
atikmpag.sys                Tue Jun 28 20:11:21 2011 (4E0A89C9)
atikmdag.sys                Tue Jun 28 20:25:05 2011 (4E0A8D01)
stwrt64.sys                 Thu Jun 30 20:34:00 2011 (4E0D3218)
usbfilter.sys               Mon Aug  8 03:35:55 2011 (4E3FADFB)
SynTP.sys                   Thu Oct 13 20:34:52 2011 (4E979FCC)

Analysis:

The following is for information purposes only. The following information contains the relevant information from the blue screen analysis:

Code:

**************************Sat Mar 16 17:34:27.761 2013 (UTC - 6:00)**************************
Loading Dump File [C:\Users\writh ziden\Downloads\2013_03_16\hfc.t3ch83\Windows7_Vista_jcgriff2\031613-24008-01.dmp]
Windows 7 Kernel Version 7601 (Service Pack 1) MP (2 procs) Free x64
Built by: 7601.18044.amd64fre.win7sp1_gdr.130104-1431
System Uptime:0 days 0:02:47.336
*** WARNING: Unable to verify timestamp for amd_xata.sys
*** ERROR: Module load completed but symbols could not be loaded for amd_xata.sys
Probably caused by :amd_xata.sys ( amd_xata+1a23 )
BugCheck 50, {fffff88086909f30, 1, fffffa80028062e6, 5}
BugCheck Info: PAGE_FAULT_IN_NONPAGED_AREA (50)
Arguments: 
Arg1: fffff88086909f30, memory referenced.
Arg2: 0000000000000001, value 0 = read operation, 1 = write operation.
Arg3: fffffa80028062e6, If non-zero, the instruction address which referenced the bad memory
	address.
Arg4: 0000000000000005, (reserved)
BUGCHECK_STR:  0x50
DEFAULT_BUCKET_ID:  WIN7_DRIVER_FAULT
PROCESS_NAME:  FNPLicensingSe
FAILURE_BUCKET_ID: X64_0x50_amd_xata+1a23
  BIOS Version                  F.14
  BIOS Release Date             2/13/2012
  Manufacturer                  Hewlett-Packard
  Product Name                  HP 3115m
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
**************************Sat Mar 16 17:30:40.455 2013 (UTC - 6:00)**************************
Loading Dump File [C:\Users\writh ziden\Downloads\2013_03_16\hfc.t3ch83\Windows7_Vista_jcgriff2\031613-30045-01.dmp]
Windows 7 Kernel Version 7601 (Service Pack 1) MP (2 procs) Free x64
Built by: 7601.18044.amd64fre.win7sp1_gdr.130104-1431
System Uptime:0 days 0:02:56.029
*** WARNING: Unable to verify timestamp for amd_xata.sys
*** ERROR: Module load completed but symbols could not be loaded for amd_xata.sys
Probably caused by :amd_xata.sys ( amd_xata+1a23 )
BugCheck 50, {fffff8808b2364a0, 1, fffffa80028112e6, 5}
BugCheck Info: PAGE_FAULT_IN_NONPAGED_AREA (50)
Arguments: 
Arg1: fffff8808b2364a0, memory referenced.
Arg2: 0000000000000001, value 0 = read operation, 1 = write operation.
Arg3: fffffa80028112e6, If non-zero, the instruction address which referenced the bad memory
	address.
Arg4: 0000000000000005, (reserved)
BUGCHECK_STR:  0x50
DEFAULT_BUCKET_ID:  WIN7_DRIVER_FAULT
PROCESS_NAME:  FNPLicensingSe
FAILURE_BUCKET_ID: X64_0x50_amd_xata+1a23
  BIOS Version                  F.14
  BIOS Release Date             2/13/2012
  Manufacturer                  Hewlett-Packard
  Product Name                  HP 3115m
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
**************************Sat Mar 16 17:27:04.155 2013 (UTC - 6:00)**************************
Loading Dump File [C:\Users\writh ziden\Downloads\2013_03_16\hfc.t3ch83\Windows7_Vista_jcgriff2\031613-29827-01.dmp]
Windows 7 Kernel Version 7601 (Service Pack 1) MP (2 procs) Free x64
Built by: 7601.18044.amd64fre.win7sp1_gdr.130104-1431
System Uptime:0 days 0:02:31.730
*** WARNING: Unable to verify timestamp for amd_xata.sys
*** ERROR: Module load completed but symbols could not be loaded for amd_xata.sys
Probably caused by :amd_xata.sys ( amd_xata+1a23 )
BugCheck 50, {fffff8808873a6a0, 1, fffffa80028112e6, 5}
BugCheck Info: PAGE_FAULT_IN_NONPAGED_AREA (50)
Arguments: 
Arg1: fffff8808873a6a0, memory referenced.
Arg2: 0000000000000001, value 0 = read operation, 1 = write operation.
Arg3: fffffa80028112e6, If non-zero, the instruction address which referenced the bad memory
	address.
Arg4: 0000000000000005, (reserved)
BUGCHECK_STR:  0x50
DEFAULT_BUCKET_ID:  WIN7_DRIVER_FAULT
PROCESS_NAME:  FNPLicensingSe
FAILURE_BUCKET_ID: X64_0x50_amd_xata+1a23
  BIOS Version                  F.14
  BIOS Release Date             2/13/2012
  Manufacturer                  Hewlett-Packard
  Product Name                  HP 3115m
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
**************************Sat Mar 16 16:45:12.825 2013 (UTC - 6:00)**************************
Loading Dump File [C:\Users\writh ziden\Downloads\2013_03_16\hfc.t3ch83\Windows7_Vista_jcgriff2\031613-23415-01.dmp]
Windows 7 Kernel Version 7601 (Service Pack 1) MP (2 procs) Free x64
Built by: 7601.18044.amd64fre.win7sp1_gdr.130104-1431
System Uptime:0 days 0:02:47.400
*** WARNING: Unable to verify timestamp for amd_xata.sys
*** ERROR: Module load completed but symbols could not be loaded for amd_xata.sys
Probably caused by :amd_xata.sys ( amd_xata+1a23 )
BugCheck 50, {fffff880888b6aa0, 1, fffffa80028212e6, 5}
BugCheck Info: PAGE_FAULT_IN_NONPAGED_AREA (50)
Arguments: 
Arg1: fffff880888b6aa0, memory referenced.
Arg2: 0000000000000001, value 0 = read operation, 1 = write operation.
Arg3: fffffa80028212e6, If non-zero, the instruction address which referenced the bad memory
	address.
Arg4: 0000000000000005, (reserved)
BUGCHECK_STR:  0x50
DEFAULT_BUCKET_ID:  WIN7_DRIVER_FAULT
PROCESS_NAME:  FNPLicensingSe
FAILURE_BUCKET_ID: X64_0x50_amd_xata+1a23
  BIOS Version                  F.14
  BIOS Release Date             2/13/2012
  Manufacturer                  Hewlett-Packard
  Product Name                  HP 3115m
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
**************************Sat Mar 16 16:41:27.284 2013 (UTC - 6:00)**************************
Loading Dump File [C:\Users\writh ziden\Downloads\2013_03_16\hfc.t3ch83\Windows7_Vista_jcgriff2\031613-30139-01.dmp]
Windows 7 Kernel Version 7601 (Service Pack 1) MP (2 procs) Free x64
Built by: 7601.18044.amd64fre.win7sp1_gdr.130104-1431
System Uptime:0 days 0:02:31.734
*** WARNING: Unable to verify timestamp for amd_xata.sys
*** ERROR: Module load completed but symbols could not be loaded for amd_xata.sys
Probably caused by :amd_xata.sys ( amd_xata+1a23 )
BugCheck 50, {fffff88088847930, 1, fffffa800283b2e6, 5}
BugCheck Info: PAGE_FAULT_IN_NONPAGED_AREA (50)
Arguments: 
Arg1: fffff88088847930, memory referenced.
Arg2: 0000000000000001, value 0 = read operation, 1 = write operation.
Arg3: fffffa800283b2e6, If non-zero, the instruction address which referenced the bad memory
	address.
Arg4: 0000000000000005, (reserved)
BUGCHECK_STR:  0x50
DEFAULT_BUCKET_ID:  WIN7_DRIVER_FAULT
PROCESS_NAME:  FNPLicensingSe
FAILURE_BUCKET_ID: X64_0x50_amd_xata+1a23
  BIOS Version                  F.14
  BIOS Release Date             2/13/2012
  Manufacturer                  Hewlett-Packard
  Product Name                  HP 3115m
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
**************************Sat Mar 16 16:25:50.586 2013 (UTC - 6:00)**************************
Loading Dump File [C:\Users\writh ziden\Downloads\2013_03_16\hfc.t3ch83\Windows7_Vista_jcgriff2\031613-23322-01.dmp]
Windows 7 Kernel Version 7601 (Service Pack 1) MP (2 procs) Free x64
Built by: 7601.18044.amd64fre.win7sp1_gdr.130104-1431
System Uptime:0 days 0:02:53.161
*** WARNING: Unable to verify timestamp for amd_xata.sys
*** ERROR: Module load completed but symbols could not be loaded for amd_xata.sys
Probably caused by :amd_xata.sys ( amd_xata+1a23 )
BugCheck 50, {fffff8808c0c4d30, 1, fffffa800283e2e6, 5}
BugCheck Info: PAGE_FAULT_IN_NONPAGED_AREA (50)
Arguments: 
Arg1: fffff8808c0c4d30, memory referenced.
Arg2: 0000000000000001, value 0 = read operation, 1 = write operation.
Arg3: fffffa800283e2e6, If non-zero, the instruction address which referenced the bad memory
	address.
Arg4: 0000000000000005, (reserved)
BUGCHECK_STR:  0x50
DEFAULT_BUCKET_ID:  WIN7_DRIVER_FAULT
PROCESS_NAME:  FNPLicensingSe
FAILURE_BUCKET_ID: X64_0x50_amd_xata+1a23
  BIOS Version                  F.14
  BIOS Release Date             2/13/2012
  Manufacturer                  Hewlett-Packard
  Product Name                  HP 3115m
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
**************************Sat Mar 16 16:21:58.634 2013 (UTC - 6:00)**************************
Loading Dump File [C:\Users\writh ziden\Downloads\2013_03_16\hfc.t3ch83\Windows7_Vista_jcgriff2\031613-29749-01.dmp]
Windows 7 Kernel Version 7601 (Service Pack 1) MP (2 procs) Free x64
Built by: 7601.18044.amd64fre.win7sp1_gdr.130104-1431
System Uptime:0 days 0:02:52.209
*** WARNING: Unable to verify timestamp for amd_xata.sys
*** ERROR: Module load completed but symbols could not be loaded for amd_xata.sys
Probably caused by :amd_xata.sys ( amd_xata+1a23 )
BugCheck 50, {fffff880888622a0, 1, fffffa80028112e6, 5}
BugCheck Info: PAGE_FAULT_IN_NONPAGED_AREA (50)
Arguments: 
Arg1: fffff880888622a0, memory referenced.
Arg2: 0000000000000001, value 0 = read operation, 1 = write operation.
Arg3: fffffa80028112e6, If non-zero, the instruction address which referenced the bad memory
	address.
Arg4: 0000000000000005, (reserved)
BUGCHECK_STR:  0x50
DEFAULT_BUCKET_ID:  WIN7_DRIVER_FAULT
PROCESS_NAME:  FNPLicensingSe
FAILURE_BUCKET_ID: X64_0x50_amd_xata+1a23
  BIOS Version                  F.14
  BIOS Release Date             2/13/2012
  Manufacturer                  Hewlett-Packard
  Product Name                  HP 3115m
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
**************************Sat Mar 16 16:18:08.407 2013 (UTC - 6:00)**************************
Loading Dump File [C:\Users\writh ziden\Downloads\2013_03_16\hfc.t3ch83\Windows7_Vista_jcgriff2\031613-29733-01.dmp]
Windows 7 Kernel Version 7601 (Service Pack 1) MP (2 procs) Free x64
Built by: 7601.18044.amd64fre.win7sp1_gdr.130104-1431
System Uptime:0 days 0:02:38.857
*** WARNING: Unable to verify timestamp for amd_xata.sys
*** ERROR: Module load completed but symbols could not be loaded for amd_xata.sys
Probably caused by :amd_xata.sys ( amd_xata+1a23 )
BugCheck 50, {fffff880906634a0, 1, fffffa800283e2e6, 5}
BugCheck Info: PAGE_FAULT_IN_NONPAGED_AREA (50)
Arguments: 
Arg1: fffff880906634a0, memory referenced.
Arg2: 0000000000000001, value 0 = read operation, 1 = write operation.
Arg3: fffffa800283e2e6, If non-zero, the instruction address which referenced the bad memory
	address.
Arg4: 0000000000000005, (reserved)
BUGCHECK_STR:  0x50
DEFAULT_BUCKET_ID:  WIN7_DRIVER_FAULT
PROCESS_NAME:  FNPLicensingSe
FAILURE_BUCKET_ID: X64_0x50_amd_xata+1a23
  BIOS Version                  F.14
  BIOS Release Date             2/13/2012
  Manufacturer                  Hewlett-Packard
  Product Name                  HP 3115m
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
**************************Sat Mar 16 16:04:29.862 2013 (UTC - 6:00)**************************
Loading Dump File [C:\Users\writh ziden\Downloads\2013_03_16\hfc.t3ch83\Windows7_Vista_jcgriff2\031613-22682-01.dmp]
Windows 7 Kernel Version 7601 (Service Pack 1) MP (2 procs) Free x64
Built by: 7601.18044.amd64fre.win7sp1_gdr.130104-1431
System Uptime:0 days 0:02:57.312
*** WARNING: Unable to verify timestamp for amd_xata.sys
*** ERROR: Module load completed but symbols could not be loaded for amd_xata.sys
Probably caused by :amd_xata.sys ( amd_xata+1a23 )
BugCheck 50, {fffff8808a4288a0, 1, fffffa800283c2e6, 5}
BugCheck Info: PAGE_FAULT_IN_NONPAGED_AREA (50)
Arguments: 
Arg1: fffff8808a4288a0, memory referenced.
Arg2: 0000000000000001, value 0 = read operation, 1 = write operation.
Arg3: fffffa800283c2e6, If non-zero, the instruction address which referenced the bad memory
	address.
Arg4: 0000000000000005, (reserved)
BUGCHECK_STR:  0x50
DEFAULT_BUCKET_ID:  WIN7_DRIVER_FAULT
PROCESS_NAME:  FNPLicensingSe
FAILURE_BUCKET_ID: X64_0x50_amd_xata+1a23
  BIOS Version                  F.14
  BIOS Release Date             2/13/2012
  Manufacturer                  Hewlett-Packard
  Product Name                  HP 3115m
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
**************************Sat Mar 16 16:00:32.946 2013 (UTC - 6:00)**************************
Loading Dump File [C:\Users\writh ziden\Downloads\2013_03_16\hfc.t3ch83\Windows7_Vista_jcgriff2\031613-33524-01.dmp]
Windows 7 Kernel Version 7601 (Service Pack 1) MP (2 procs) Free x64
Built by: 7601.18044.amd64fre.win7sp1_gdr.130104-1431
System Uptime:0 days 0:02:52.506
Probably caused by :ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+43801 )
BugCheck 50, {fffff8808881aaa0, 1, fffffa80028112e6, 5}
BugCheck Info: PAGE_FAULT_IN_NONPAGED_AREA (50)
Arguments: 
Arg1: fffff8808881aaa0, memory referenced.
Arg2: 0000000000000001, value 0 = read operation, 1 = write operation.
Arg3: fffffa80028112e6, If non-zero, the instruction address which referenced the bad memory
	address.
Arg4: 0000000000000005, (reserved)
BUGCHECK_STR:  0x50
DEFAULT_BUCKET_ID:  WIN7_DRIVER_FAULT
PROCESS_NAME:  FNPLicensingSe
FAILURE_BUCKET_ID: X64_0x50_nt!_??_::FNODOBFM::_string_+43801
  BIOS Version                  F.14
  BIOS Release Date             2/13/2012
  Manufacturer                  Hewlett-Packard
  Product Name                  HP 3115m
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
**************************Sat Mar 16 15:57:07.925 2013 (UTC - 6:00)**************************
Loading Dump File [C:\Users\writh ziden\Downloads\2013_03_16\hfc.t3ch83\Windows7_Vista_jcgriff2\031613-29484-01.dmp]
Windows 7 Kernel Version 7601 (Service Pack 1) MP (2 procs) Free x64
Built by: 7601.18044.amd64fre.win7sp1_gdr.130104-1431
System Uptime:0 days 0:02:46.484
*** WARNING: Unable to verify timestamp for amd_xata.sys
*** ERROR: Module load completed but symbols could not be loaded for amd_xata.sys
Probably caused by :amd_xata.sys ( amd_xata+1a23 )
BugCheck 50, {fffff8808bfdc930, 1, fffffa80028172e6, 5}
BugCheck Info: PAGE_FAULT_IN_NONPAGED_AREA (50)
Arguments: 
Arg1: fffff8808bfdc930, memory referenced.
Arg2: 0000000000000001, value 0 = read operation, 1 = write operation.
Arg3: fffffa80028172e6, If non-zero, the instruction address which referenced the bad memory
	address.
Arg4: 0000000000000005, (reserved)
BUGCHECK_STR:  0x50
DEFAULT_BUCKET_ID:  WIN7_DRIVER_FAULT
PROCESS_NAME:  FNPLicensingSe
FAILURE_BUCKET_ID: X64_0x50_amd_xata+1a23
  BIOS Version                  F.14
  BIOS Release Date             2/13/2012
  Manufacturer                  Hewlett-Packard
  Product Name                  HP 3115m
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
**************************Fri Mar  8 23:16:31.196 2013 (UTC - 6:00)**************************
Loading Dump File [C:\Users\writh ziden\Downloads\2013_03_16\hfc.t3ch83\Windows7_Vista_jcgriff2\030913-29686-01.dmp]
Windows 7 Kernel Version 7601 (Service Pack 1) MP (2 procs) Free x64
Built by: 7601.18044.amd64fre.win7sp1_gdr.130104-1431
System Uptime:0 days 0:03:02.770
*** WARNING: Unable to verify timestamp for amd_xata.sys
*** ERROR: Module load completed but symbols could not be loaded for amd_xata.sys
Probably caused by :amd_xata.sys ( amd_xata+1a23 )
BugCheck 50, {fffff8808c323d30, 1, fffffa80028402e6, 5}
BugCheck Info: PAGE_FAULT_IN_NONPAGED_AREA (50)
Arguments: 
Arg1: fffff8808c323d30, memory referenced.
Arg2: 0000000000000001, value 0 = read operation, 1 = write operation.
Arg3: fffffa80028402e6, If non-zero, the instruction address which referenced the bad memory
	address.
Arg4: 0000000000000005, (reserved)
BUGCHECK_STR:  0x50
DEFAULT_BUCKET_ID:  WIN7_DRIVER_FAULT
PROCESS_NAME:  FNPLicensingSe
FAILURE_BUCKET_ID: X64_0x50_amd_xata+1a23
  BIOS Version                  F.14
  BIOS Release Date             2/13/2012
  Manufacturer                  Hewlett-Packard
  Product Name                  HP 3115m
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
**************************Fri Mar  8 23:12:29.448 2013 (UTC - 6:00)**************************
Loading Dump File [C:\Users\writh ziden\Downloads\2013_03_16\hfc.t3ch83\Windows7_Vista_jcgriff2\030913-30513-01.dmp]
Windows 7 Kernel Version 7601 (Service Pack 1) MP (2 procs) Free x64
Built by: 7601.18044.amd64fre.win7sp1_gdr.130104-1431
System Uptime:0 days 0:03:01.039
*** WARNING: Unable to verify timestamp for amd_xata.sys
*** ERROR: Module load completed but symbols could not be loaded for amd_xata.sys
Probably caused by :amd_xata.sys ( amd_xata+1a23 )
BugCheck 50, {fffff880913c4fc0, 1, fffffa800283a2e6, 5}
BugCheck Info: PAGE_FAULT_IN_NONPAGED_AREA (50)
Arguments: 
Arg1: fffff880913c4fc0, memory referenced.
Arg2: 0000000000000001, value 0 = read operation, 1 = write operation.
Arg3: fffffa800283a2e6, If non-zero, the instruction address which referenced the bad memory
	address.
Arg4: 0000000000000005, (reserved)
BUGCHECK_STR:  0x50
DEFAULT_BUCKET_ID:  WIN7_DRIVER_FAULT
PROCESS_NAME:  FNPLicensingSe
FAILURE_BUCKET_ID: X64_0x50_amd_xata+1a23
  BIOS Version                  F.14
  BIOS Release Date             2/13/2012
  Manufacturer                  Hewlett-Packard
  Product Name                  HP 3115m
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
**************************Fri Mar  8 23:08:28.904 2013 (UTC - 6:00)**************************
Loading Dump File [C:\Users\writh ziden\Downloads\2013_03_16\hfc.t3ch83\Windows7_Vista_jcgriff2\030913-30279-01.dmp]
Windows 7 Kernel Version 7601 (Service Pack 1) MP (2 procs) Free x64
Built by: 7601.18044.amd64fre.win7sp1_gdr.130104-1431
System Uptime:0 days 0:03:00.338
*** WARNING: Unable to verify timestamp for amd_xata.sys
*** ERROR: Module load completed but symbols could not be loaded for amd_xata.sys
Probably caused by :amd_xata.sys ( amd_xata+1a23 )
BugCheck 50, {fffff8808d3f31c0, 1, fffffa80028372e6, 5}
BugCheck Info: PAGE_FAULT_IN_NONPAGED_AREA (50)
Arguments: 
Arg1: fffff8808d3f31c0, memory referenced.
Arg2: 0000000000000001, value 0 = read operation, 1 = write operation.
Arg3: fffffa80028372e6, If non-zero, the instruction address which referenced the bad memory
	address.
Arg4: 0000000000000005, (reserved)
BUGCHECK_STR:  0x50
DEFAULT_BUCKET_ID:  WIN7_DRIVER_FAULT
PROCESS_NAME:  FNPLicensingSe
FAILURE_BUCKET_ID: X64_0x50_amd_xata+1a23
  BIOS Version                  F.14
  BIOS Release Date             2/13/2012
  Manufacturer                  Hewlett-Packard
  Product Name                  HP 3115m
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
**************************Fri Mar  8 23:04:29.255 2013 (UTC - 6:00)**************************
Loading Dump File [C:\Users\writh ziden\Downloads\2013_03_16\hfc.t3ch83\Windows7_Vista_jcgriff2\030913-30700-01.dmp]
Windows 7 Kernel Version 7601 (Service Pack 1) MP (2 procs) Free x64
Built by: 7601.18044.amd64fre.win7sp1_gdr.130104-1431
System Uptime:0 days 0:02:57.830
*** WARNING: Unable to verify timestamp for amd_xata.sys
*** ERROR: Module load completed but symbols could not be loaded for amd_xata.sys
Probably caused by :amd_xata.sys ( amd_xata+1a23 )
BugCheck 50, {fffff880887a33c0, 1, fffffa800283f2e6, 5}
BugCheck Info: PAGE_FAULT_IN_NONPAGED_AREA (50)
Arguments: 
Arg1: fffff880887a33c0, memory referenced.
Arg2: 0000000000000001, value 0 = read operation, 1 = write operation.
Arg3: fffffa800283f2e6, If non-zero, the instruction address which referenced the bad memory
	address.
Arg4: 0000000000000005, (reserved)
BUGCHECK_STR:  0x50
DEFAULT_BUCKET_ID:  WIN7_DRIVER_FAULT
PROCESS_NAME:  FNPLicensingSe
FAILURE_BUCKET_ID: X64_0x50_amd_xata+1a23
  BIOS Version                  F.14
  BIOS Release Date             2/13/2012
  Manufacturer                  Hewlett-Packard
  Product Name                  HP 3115m
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
**************************Fri Mar  8 23:00:32.447 2013 (UTC - 6:00)**************************
Loading Dump File [C:\Users\writh ziden\Downloads\2013_03_16\hfc.t3ch83\Windows7_Vista_jcgriff2\030913-29842-01.dmp]
Windows 7 Kernel Version 7601 (Service Pack 1) MP (2 procs) Free x64
Built by: 7601.18044.amd64fre.win7sp1_gdr.130104-1431
System Uptime:0 days 0:03:02.006
*** WARNING: Unable to verify timestamp for amd_xata.sys
*** ERROR: Module load completed but symbols could not be loaded for amd_xata.sys
Probably caused by :amd_xata.sys ( amd_xata+1a23 )
BugCheck 50, {fffff8808c6725c0, 1, fffffa800283f2e6, 5}
BugCheck Info: PAGE_FAULT_IN_NONPAGED_AREA (50)
Arguments: 
Arg1: fffff8808c6725c0, memory referenced.
Arg2: 0000000000000001, value 0 = read operation, 1 = write operation.
Arg3: fffffa800283f2e6, If non-zero, the instruction address which referenced the bad memory
	address.
Arg4: 0000000000000005, (reserved)
BUGCHECK_STR:  0x50
DEFAULT_BUCKET_ID:  WIN7_DRIVER_FAULT
PROCESS_NAME:  FNPLicensingSe
FAILURE_BUCKET_ID: X64_0x50_amd_xata+1a23
  BIOS Version                  F.14
  BIOS Release Date             2/13/2012
  Manufacturer                  Hewlett-Packard
  Product Name                  HP 3115m
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
**************************Fri Mar  8 22:56:30.632 2013 (UTC - 6:00)**************************
Loading Dump File [C:\Users\writh ziden\Downloads\2013_03_16\hfc.t3ch83\Windows7_Vista_jcgriff2\030813-29640-02.dmp]
Windows 7 Kernel Version 7601 (Service Pack 1) MP (2 procs) Free x64
Built by: 7601.18044.amd64fre.win7sp1_gdr.130104-1431
System Uptime:0 days 0:03:03.207
Probably caused by :ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+43801 )
BugCheck 50, {fffff8808bf9faa0, 1, fffffa80028112e6, 5}
BugCheck Info: PAGE_FAULT_IN_NONPAGED_AREA (50)
Arguments: 
Arg1: fffff8808bf9faa0, memory referenced.
Arg2: 0000000000000001, value 0 = read operation, 1 = write operation.
Arg3: fffffa80028112e6, If non-zero, the instruction address which referenced the bad memory
	address.
Arg4: 0000000000000005, (reserved)
BUGCHECK_STR:  0x50
DEFAULT_BUCKET_ID:  WIN7_DRIVER_FAULT
PROCESS_NAME:  FNPLicensingSe
FAILURE_BUCKET_ID: X64_0x50_nt!_??_::FNODOBFM::_string_+43801
  BIOS Version                  F.14
  BIOS Release Date             2/13/2012
  Manufacturer                  Hewlett-Packard
  Product Name                  HP 3115m
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
**************************Fri Mar  8 22:52:28.339 2013 (UTC - 6:00)**************************
Loading Dump File [C:\Users\writh ziden\Downloads\2013_03_16\hfc.t3ch83\Windows7_Vista_jcgriff2\030813-29749-01.dmp]
Windows 7 Kernel Version 7601 (Service Pack 1) MP (2 procs) Free x64
Built by: 7601.18044.amd64fre.win7sp1_gdr.130104-1431
System Uptime:0 days 0:03:01.774
*** WARNING: Unable to verify timestamp for amd_xata.sys
*** ERROR: Module load completed but symbols could not be loaded for amd_xata.sys
Probably caused by :amd_xata.sys ( amd_xata+1a23 )
BugCheck 50, {fffff88091452ca0, 1, fffffa80028452e6, 5}
BugCheck Info: PAGE_FAULT_IN_NONPAGED_AREA (50)
Arguments: 
Arg1: fffff88091452ca0, memory referenced.
Arg2: 0000000000000001, value 0 = read operation, 1 = write operation.
Arg3: fffffa80028452e6, If non-zero, the instruction address which referenced the bad memory
	address.
Arg4: 0000000000000005, (reserved)
BUGCHECK_STR:  0x50
DEFAULT_BUCKET_ID:  WIN7_DRIVER_FAULT
PROCESS_NAME:  FNPLicensingSe
FAILURE_BUCKET_ID: X64_0x50_amd_xata+1a23
  BIOS Version                  F.14
  BIOS Release Date             2/13/2012
  Manufacturer                  Hewlett-Packard
  Product Name                  HP 3115m
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
**************************Fri Mar  8 22:48:27.096 2013 (UTC - 6:00)**************************
Loading Dump File [C:\Users\writh ziden\Downloads\2013_03_16\hfc.t3ch83\Windows7_Vista_jcgriff2\030813-30591-01.dmp]
Windows 7 Kernel Version 7601 (Service Pack 1) MP (2 procs) Free x64
Built by: 7601.18044.amd64fre.win7sp1_gdr.130104-1431
System Uptime:0 days 0:02:56.671
*** WARNING: Unable to verify timestamp for amd_xata.sys
*** ERROR: Module load completed but symbols could not be loaded for amd_xata.sys
Probably caused by :amd_xata.sys ( amd_xata+1a23 )
BugCheck 50, {fffff8808a4f3ea0, 1, fffffa800283c2e6, 5}
BugCheck Info: PAGE_FAULT_IN_NONPAGED_AREA (50)
Arguments: 
Arg1: fffff8808a4f3ea0, memory referenced.
Arg2: 0000000000000001, value 0 = read operation, 1 = write operation.
Arg3: fffffa800283c2e6, If non-zero, the instruction address which referenced the bad memory
	address.
Arg4: 0000000000000005, (reserved)
BUGCHECK_STR:  0x50
DEFAULT_BUCKET_ID:  WIN7_DRIVER_FAULT
PROCESS_NAME:  FNPLicensingSe
FAILURE_BUCKET_ID: X64_0x50_amd_xata+1a23
  BIOS Version                  F.14
  BIOS Release Date             2/13/2012
  Manufacturer                  Hewlett-Packard
  Product Name                  HP 3115m
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
**************************Fri Mar  8 22:44:30.814 2013 (UTC - 6:00)**************************
Loading Dump File [C:\Users\writh ziden\Downloads\2013_03_16\hfc.t3ch83\Windows7_Vista_jcgriff2\030813-29640-01.dmp]
Windows 7 Kernel Version 7601 (Service Pack 1) MP (2 procs) Free x64
Built by: 7601.18044.amd64fre.win7sp1_gdr.130104-1431
System Uptime:0 days 0:02:57.388
*** WARNING: Unable to verify timestamp for amd_xata.sys
*** ERROR: Module load completed but symbols could not be loaded for amd_xata.sys
Probably caused by :amd_xata.sys ( amd_xata+1a23 )
BugCheck 50, {fffff8808a4670a0, 1, fffffa80028462e6, 5}
BugCheck Info: PAGE_FAULT_IN_NONPAGED_AREA (50)
Arguments: 
Arg1: fffff8808a4670a0, memory referenced.
Arg2: 0000000000000001, value 0 = read operation, 1 = write operation.
Arg3: fffffa80028462e6, If non-zero, the instruction address which referenced the bad memory
	address.
Arg4: 0000000000000005, (reserved)
BUGCHECK_STR:  0x50
DEFAULT_BUCKET_ID:  WIN7_DRIVER_FAULT
PROCESS_NAME:  FNPLicensingSe
FAILURE_BUCKET_ID: X64_0x50_amd_xata+1a23
  BIOS Version                  F.14
  BIOS Release Date             2/13/2012
  Manufacturer                  Hewlett-Packard
  Product Name                  HP 3115m
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
**************************Fri Mar  8 22:40:33.937 2013 (UTC - 6:00)**************************
Loading Dump File [C:\Users\writh ziden\Downloads\2013_03_16\hfc.t3ch83\Windows7_Vista_jcgriff2\030813-30076-01.dmp]
Windows 7 Kernel Version 7601 (Service Pack 1) MP (2 procs) Free x64
Built by: 7601.18044.amd64fre.win7sp1_gdr.130104-1431
System Uptime:0 days 0:02:58.512
*** WARNING: Unable to verify timestamp for amd_xata.sys
*** ERROR: Module load completed but symbols could not be loaded for amd_xata.sys
Probably caused by :amd_xata.sys ( amd_xata+1a23 )
BugCheck 50, {fffff880888eefc0, 1, fffffa80028112e6, 5}
BugCheck Info: PAGE_FAULT_IN_NONPAGED_AREA (50)
Arguments: 
Arg1: fffff880888eefc0, memory referenced.
Arg2: 0000000000000001, value 0 = read operation, 1 = write operation.
Arg3: fffffa80028112e6, If non-zero, the instruction address which referenced the bad memory
	address.
Arg4: 0000000000000005, (reserved)
BUGCHECK_STR:  0x50
DEFAULT_BUCKET_ID:  WIN7_DRIVER_FAULT
PROCESS_NAME:  FNPLicensingSe
FAILURE_BUCKET_ID: X64_0x50_amd_xata+1a23
  BIOS Version                  F.14
  BIOS Release Date             2/13/2012
  Manufacturer                  Hewlett-Packard
  Product Name                  HP 3115m
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
**************************Fri Mar  8 22:36:35.748 2013 (UTC - 6:00)**************************
Loading Dump File [C:\Users\writh ziden\Downloads\2013_03_16\hfc.t3ch83\Windows7_Vista_jcgriff2\030813-29421-01.dmp]
Windows 7 Kernel Version 7601 (Service Pack 1) MP (2 procs) Free x64
Built by: 7601.18044.amd64fre.win7sp1_gdr.130104-1431
System Uptime:0 days 0:02:59.307
*** WARNING: Unable to verify timestamp for amd_xata.sys
*** ERROR: Module load completed but symbols could not be loaded for amd_xata.sys
Probably caused by :amd_xata.sys ( amd_xata+1a23 )
BugCheck 50, {fffff8808bfec1c0, 1, fffffa80028382e6, 5}
BugCheck Info: PAGE_FAULT_IN_NONPAGED_AREA (50)
Arguments: 
Arg1: fffff8808bfec1c0, memory referenced.
Arg2: 0000000000000001, value 0 = read operation, 1 = write operation.
Arg3: fffffa80028382e6, If non-zero, the instruction address which referenced the bad memory
	address.
Arg4: 0000000000000005, (reserved)
BUGCHECK_STR:  0x50
DEFAULT_BUCKET_ID:  WIN7_DRIVER_FAULT
PROCESS_NAME:  FNPLicensingSe
FAILURE_BUCKET_ID: X64_0x50_amd_xata+1a23
  BIOS Version                  F.14
  BIOS Release Date             2/13/2012
  Manufacturer                  Hewlett-Packard
  Product Name                  HP 3115m
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
**************************Fri Mar  8 22:32:51.342 2013 (UTC - 6:00)**************************
Loading Dump File [C:\Users\writh ziden\Downloads\2013_03_16\hfc.t3ch83\Windows7_Vista_jcgriff2\030813-29718-01.dmp]
Windows 7 Kernel Version 7601 (Service Pack 1) MP (2 procs) Free x64
Built by: 7601.18044.amd64fre.win7sp1_gdr.130104-1431
System Uptime:0 days 0:02:59.901
*** WARNING: Unable to verify timestamp for amd_xata.sys
*** ERROR: Module load completed but symbols could not be loaded for amd_xata.sys
Probably caused by :amd_xata.sys ( amd_xata+1a23 )
BugCheck 50, {fffff880921af3c0, 1, fffffa80028392e6, 5}
BugCheck Info: PAGE_FAULT_IN_NONPAGED_AREA (50)
Arguments: 
Arg1: fffff880921af3c0, memory referenced.
Arg2: 0000000000000001, value 0 = read operation, 1 = write operation.
Arg3: fffffa80028392e6, If non-zero, the instruction address which referenced the bad memory
	address.
Arg4: 0000000000000005, (reserved)
BUGCHECK_STR:  0x50
DEFAULT_BUCKET_ID:  WIN7_DRIVER_FAULT
PROCESS_NAME:  FNPLicensingSe
FAILURE_BUCKET_ID: X64_0x50_amd_xata+1a23
  BIOS Version                  F.14
  BIOS Release Date             2/13/2012
  Manufacturer                  Hewlett-Packard
  Product Name                  HP 3115m
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
**************************Fri Mar  8 22:28:52.325 2013 (UTC - 6:00)**************************
Loading Dump File [C:\Users\writh ziden\Downloads\2013_03_16\hfc.t3ch83\Windows7_Vista_jcgriff2\030813-30919-01.dmp]
Windows 7 Kernel Version 7601 (Service Pack 1) MP (2 procs) Free x64
Built by: 7601.18044.amd64fre.win7sp1_gdr.130104-1431
System Uptime:0 days 0:02:59.900
*** WARNING: Unable to verify timestamp for amd_xata.sys
*** ERROR: Module load completed but symbols could not be loaded for amd_xata.sys
Probably caused by :amd_xata.sys ( amd_xata+1a23 )
BugCheck 50, {fffff880868bb5c0, 1, fffffa80028212e6, 5}
BugCheck Info: PAGE_FAULT_IN_NONPAGED_AREA (50)
Arguments: 
Arg1: fffff880868bb5c0, memory referenced.
Arg2: 0000000000000001, value 0 = read operation, 1 = write operation.
Arg3: fffffa80028212e6, If non-zero, the instruction address which referenced the bad memory
	address.
Arg4: 0000000000000005, (reserved)
BUGCHECK_STR:  0x50
DEFAULT_BUCKET_ID:  WIN7_DRIVER_FAULT
PROCESS_NAME:  FNPLicensingSe
FAILURE_BUCKET_ID: X64_0x50_amd_xata+1a23
  BIOS Version                  F.14
  BIOS Release Date             2/13/2012
  Manufacturer                  Hewlett-Packard
  Product Name                  HP 3115m
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
**************************Fri Mar  8 22:24:53.062 2013 (UTC - 6:00)**************************
Loading Dump File [C:\Users\writh ziden\Downloads\2013_03_16\hfc.t3ch83\Windows7_Vista_jcgriff2\030813-29624-01.dmp]
Windows 7 Kernel Version 7601 (Service Pack 1) MP (2 procs) Free x64
Built by: 7601.18044.amd64fre.win7sp1_gdr.130104-1431
System Uptime:0 days 0:02:58.636
*** WARNING: Unable to verify timestamp for amd_xata.sys
*** ERROR: Module load completed but symbols could not be loaded for amd_xata.sys
Probably caused by :amd_xata.sys ( amd_xata+1a23 )
BugCheck 50, {fffff88094b607c0, 1, fffffa80028172e6, 5}
BugCheck Info: PAGE_FAULT_IN_NONPAGED_AREA (50)
Arguments: 
Arg1: fffff88094b607c0, memory referenced.
Arg2: 0000000000000001, value 0 = read operation, 1 = write operation.
Arg3: fffffa80028172e6, If non-zero, the instruction address which referenced the bad memory
	address.
Arg4: 0000000000000005, (reserved)
BUGCHECK_STR:  0x50
DEFAULT_BUCKET_ID:  WIN7_DRIVER_FAULT
PROCESS_NAME:  FNPLicensingSe
FAILURE_BUCKET_ID: X64_0x50_amd_xata+1a23
  BIOS Version                  F.14
  BIOS Release Date             2/13/2012
  Manufacturer                  Hewlett-Packard
  Product Name                  HP 3115m
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
**************************Fri Mar  8 22:20:54.788 2013 (UTC - 6:00)**************************
Loading Dump File [C:\Users\writh ziden\Downloads\2013_03_16\hfc.t3ch83\Windows7_Vista_jcgriff2\030813-29811-01.dmp]
Windows 7 Kernel Version 7601 (Service Pack 1) MP (2 procs) Free x64
Built by: 7601.18044.amd64fre.win7sp1_gdr.130104-1431
System Uptime:0 days 0:03:03.348
*** WARNING: Unable to verify timestamp for amd_xata.sys
*** ERROR: Module load completed but symbols could not be loaded for amd_xata.sys
Probably caused by :amd_xata.sys ( amd_xata+1a23 )
BugCheck 50, {fffff8808b1fd9c0, 1, fffffa80028112e6, 5}
BugCheck Info: PAGE_FAULT_IN_NONPAGED_AREA (50)
Arguments: 
Arg1: fffff8808b1fd9c0, memory referenced.
Arg2: 0000000000000001, value 0 = read operation, 1 = write operation.
Arg3: fffffa80028112e6, If non-zero, the instruction address which referenced the bad memory
	address.
Arg4: 0000000000000005, (reserved)
BUGCHECK_STR:  0x50
DEFAULT_BUCKET_ID:  WIN7_DRIVER_FAULT
PROCESS_NAME:  FNPLicensingSe
FAILURE_BUCKET_ID: X64_0x50_amd_xata+1a23
  BIOS Version                  F.14
  BIOS Release Date             2/13/2012
  Manufacturer                  Hewlett-Packard
  Product Name                  HP 3115m
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
**************************Fri Mar  8 22:16:50.336 2013 (UTC - 6:00)**************************
Loading Dump File [C:\Users\writh ziden\Downloads\2013_03_16\hfc.t3ch83\Windows7_Vista_jcgriff2\030813-30498-01.dmp]
Windows 7 Kernel Version 7601 (Service Pack 1) MP (2 procs) Free x64
Built by: 7601.18044.amd64fre.win7sp1_gdr.130104-1431
System Uptime:0 days 0:02:03.911
Probably caused by :ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+43801 )
BugCheck 50, {fffff88093061ea0, 1, fffffa80029ca2e6, 5}
BugCheck Info: PAGE_FAULT_IN_NONPAGED_AREA (50)
Arguments: 
Arg1: fffff88093061ea0, memory referenced.
Arg2: 0000000000000001, value 0 = read operation, 1 = write operation.
Arg3: fffffa80029ca2e6, If non-zero, the instruction address which referenced the bad memory
	address.
Arg4: 0000000000000005, (reserved)
BUGCHECK_STR:  0x50
DEFAULT_BUCKET_ID:  WIN7_DRIVER_FAULT
PROCESS_NAME:  FNPLicensingSe
FAILURE_BUCKET_ID: X64_0x50_nt!_??_::FNODOBFM::_string_+43801
  BIOS Version                  F.14
  BIOS Release Date             2/13/2012
  Manufacturer                  Hewlett-Packard
  Product Name                  HP 3115m
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
**************************Fri Mar  8 22:13:46.509 2013 (UTC - 6:00)**************************
Loading Dump File [C:\Users\writh ziden\Downloads\2013_03_16\hfc.t3ch83\Windows7_Vista_jcgriff2\030813-23041-01.dmp]
Windows 7 Kernel Version 7601 (Service Pack 1) MP (2 procs) Free x64
Built by: 7601.18044.amd64fre.win7sp1_gdr.130104-1431
System Uptime:0 days 0:02:03.084
*** WARNING: Unable to verify timestamp for amd_xata.sys
*** ERROR: Module load completed but symbols could not be loaded for amd_xata.sys
Probably caused by :amd_xata.sys ( amd_xata+1a23 )
BugCheck 50, {fffff8808f8eb0a0, 1, fffffa8002a492e6, 5}
BugCheck Info: PAGE_FAULT_IN_NONPAGED_AREA (50)
Arguments: 
Arg1: fffff8808f8eb0a0, memory referenced.
Arg2: 0000000000000001, value 0 = read operation, 1 = write operation.
Arg3: fffffa8002a492e6, If non-zero, the instruction address which referenced the bad memory
	address.
Arg4: 0000000000000005, (reserved)
BUGCHECK_STR:  0x50
DEFAULT_BUCKET_ID:  WIN7_DRIVER_FAULT
PROCESS_NAME:  FNPLicensingSe
FAILURE_BUCKET_ID: X64_0x50_amd_xata+1a23
  BIOS Version                  F.14
  BIOS Release Date             2/13/2012
  Manufacturer                  Hewlett-Packard
  Product Name                  HP 3115m
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
**************************Fri Mar  8 22:10:43.247 2013 (UTC - 6:00)**************************
Loading Dump File [C:\Users\writh ziden\Downloads\2013_03_16\hfc.t3ch83\Windows7_Vista_jcgriff2\030813-22822-01.dmp]
Windows 7 Kernel Version 7601 (Service Pack 1) MP (2 procs) Free x64
Built by: 7601.18044.amd64fre.win7sp1_gdr.130104-1431
System Uptime:0 days 0:02:00.822
*** WARNING: Unable to verify timestamp for amd_xata.sys
*** ERROR: Module load completed but symbols could not be loaded for amd_xata.sys
Probably caused by :amd_xata.sys ( amd_xata+1a23 )
BugCheck 50, {fffff8808c70efc0, 1, fffffa8002a0e2e6, 5}
BugCheck Info: PAGE_FAULT_IN_NONPAGED_AREA (50)
Arguments: 
Arg1: fffff8808c70efc0, memory referenced.
Arg2: 0000000000000001, value 0 = read operation, 1 = write operation.
Arg3: fffffa8002a0e2e6, If non-zero, the instruction address which referenced the bad memory
	address.
Arg4: 0000000000000005, (reserved)
BUGCHECK_STR:  0x50
DEFAULT_BUCKET_ID:  WIN7_DRIVER_FAULT
PROCESS_NAME:  FNPLicensingSe
FAILURE_BUCKET_ID: X64_0x50_amd_xata+1a23
  BIOS Version                  F.14
  BIOS Release Date             2/13/2012
  Manufacturer                  Hewlett-Packard
  Product Name                  HP 3115m
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
**************************Fri Mar  8 22:07:42.300 2013 (UTC - 6:00)**************************
Loading Dump File [C:\Users\writh ziden\Downloads\2013_03_16\hfc.t3ch83\Windows7_Vista_jcgriff2\030813-22604-01.dmp]
Windows 7 Kernel Version 7601 (Service Pack 1) MP (2 procs) Free x64
Built by: 7601.18044.amd64fre.win7sp1_gdr.130104-1431
System Uptime:0 days 0:02:06.859
*** WARNING: Unable to verify timestamp for amd_xata.sys
*** ERROR: Module load completed but symbols could not be loaded for amd_xata.sys
Probably caused by :amd_xata.sys ( amd_xata+1a23 )
BugCheck 50, {fffff8808c15b130, 1, fffffa8002a1e2e6, 5}
BugCheck Info: PAGE_FAULT_IN_NONPAGED_AREA (50)
Arguments: 
Arg1: fffff8808c15b130, memory referenced.
Arg2: 0000000000000001, value 0 = read operation, 1 = write operation.
Arg3: fffffa8002a1e2e6, If non-zero, the instruction address which referenced the bad memory
	address.
Arg4: 0000000000000005, (reserved)
BUGCHECK_STR:  0x50
DEFAULT_BUCKET_ID:  WIN7_DRIVER_FAULT
PROCESS_NAME:  FNPLicensingSe
FAILURE_BUCKET_ID: X64_0x50_amd_xata+1a23
  BIOS Version                  F.14
  BIOS Release Date             2/13/2012
  Manufacturer                  Hewlett-Packard
  Product Name                  HP 3115m
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
**************************Fri Mar  8 22:04:35.110 2013 (UTC - 6:00)**************************
Loading Dump File [C:\Users\writh ziden\Downloads\2013_03_16\hfc.t3ch83\Windows7_Vista_jcgriff2\030813-22994-01.dmp]
Windows 7 Kernel Version 7601 (Service Pack 1) MP (2 procs) Free x64
Built by: 7601.18044.amd64fre.win7sp1_gdr.130104-1431
System Uptime:0 days 0:01:48.685
*** WARNING: Unable to verify timestamp for amd_xata.sys
*** ERROR: Module load completed but symbols could not be loaded for amd_xata.sys
Probably caused by :amd_xata.sys ( amd_xata+1a23 )
BugCheck 50, {fffff88090555660, 1, fffffa8002a1b2e6, 5}
BugCheck Info: PAGE_FAULT_IN_NONPAGED_AREA (50)
Arguments: 
Arg1: fffff88090555660, memory referenced.
Arg2: 0000000000000001, value 0 = read operation, 1 = write operation.
Arg3: fffffa8002a1b2e6, If non-zero, the instruction address which referenced the bad memory
	address.
Arg4: 0000000000000005, (reserved)
BUGCHECK_STR:  0x50
DEFAULT_BUCKET_ID:  WIN7_DRIVER_FAULT
PROCESS_NAME:  FNPLicensingSe
FAILURE_BUCKET_ID: X64_0x50_amd_xata+1a23
  BIOS Version                  F.14
  BIOS Release Date             2/13/2012
  Manufacturer                  Hewlett-Packard
  Product Name                  HP 3115m
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
**************************Sun Mar  3 19:17:51.502 2013 (UTC - 6:00)**************************
Loading Dump File [C:\Users\writh ziden\Downloads\2013_03_16\hfc.t3ch83\Windows7_Vista_jcgriff2\030313-30778-01.dmp]
Windows 7 Kernel Version 7601 (Service Pack 1) MP (2 procs) Free x64
Built by: 7601.18044.amd64fre.win7sp1_gdr.130104-1431
System Uptime:0 days 0:02:32.045
Probably caused by :ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+43801 )
BugCheck 50, {fffff8808b1fe6a0, 1, fffffa8002a282e6, 5}
BugCheck Info: PAGE_FAULT_IN_NONPAGED_AREA (50)
Arguments: 
Arg1: fffff8808b1fe6a0, memory referenced.
Arg2: 0000000000000001, value 0 = read operation, 1 = write operation.
Arg3: fffffa8002a282e6, If non-zero, the instruction address which referenced the bad memory
	address.
Arg4: 0000000000000005, (reserved)
BUGCHECK_STR:  0x50
DEFAULT_BUCKET_ID:  WIN7_DRIVER_FAULT
PROCESS_NAME:  FNPLicensingSe
FAILURE_BUCKET_ID: X64_0x50_nt!_??_::FNODOBFM::_string_+43801
  BIOS Version                  F.14
  BIOS Release Date             2/13/2012
  Manufacturer                  Hewlett-Packard
  Product Name                  HP 3115m
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``

Search

Search

BSOD assistance

hfc.t3ch83

New member

writhziden

Administrator, .NET/UWP Developer