BSOD When i use Network Bridge for conncet to the internet

imanonline · Jan 29, 2013

Hi, I See BSOD Just When I connected To internet and if i use Network Bridge If I Delete Network Bridge I Have No problem I Use Network Bridge before In Windows 7 and have no problem and no BSOD But in windows 8 when i use internet i see more than 10 time in 1 day BSOD also I Test Tracert -d 4.2.2.4 command and if i enter this command when i use network bridge i see BSOD Please Help me To Solve this Problem Thanks

jcgriff2 · Jan 29, 2013

Hi -

bridge.sys named as the probable cause -

Code:

0: kd> lmvm bridge
start             end                 module name
fffff880`01472000 fffff880`01497000   bridge   T (no symbols)           
    Loaded symbol image file: bridge.sys
    Image path: \SystemRoot\system32\DRIVERS\bridge.sys
    Image name: bridge.sys
    Timestamp:        Wed Jul 25 22:23:17 2012 (5010AA15)

It is a Windows component - http://www.sysnative.com/drivers/driver.php?id=bridge.sys

Run Driver Verifier - https://www.sysnative.com/forums/bs...river-verifier-blue-screen-death-related.html

I'll post the output from the 46 dumps when complete.

Regards. . .

jcgriff2

jcgriff2 · Jan 29, 2013

Dump outputs:

Code:


Debug session time: Tue Jan 29 03:17:53.132 2013 (UTC - 5:00)
Loading Dump File [C:\Users\PalmDesert\SysnativeBSODApps\012913-19546-01.dmp]
Built by: 9200.16461.amd64fre.win8_gdr.121119-1606
System Uptime: 0 days 0:01:45.936
*** WARNING: Unable to verify timestamp for bridge.sys
*** ERROR: Module load completed but symbols could not be loaded for bridge.sys
Probably caused by : bridge.sys ( bridge+6ddc )
BugCheck D1, {4, 2, 0, fffff88001478ddc}
BugCheck Info: DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
Bugcheck code 000000d1
Arguments: 
Arg1: 0000000000000004, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000000, value 0 = read operation, 1 = write operation
Arg4: fffff88001478ddc, address which referenced memory
BUGCHECK_STR:  AV
DEFAULT_BUCKET_ID:  WIN8_DRIVER_FAULT
PROCESS_NAME:  TRACERT.EXE
FAILURE_BUCKET_ID:  X64_AV_bridge+6ddc
MaxSpeed:     1800
CurrentSpeed: 1809
BiosVersion = F6a
BiosReleaseDate = 07/14/2008
SystemManufacturer = Gigabyte Technology Co., Ltd.
SystemProductName = 945PL-S3P
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Debug session time: Tue Jan 29 03:15:27.144 2013 (UTC - 5:00)
Loading Dump File [C:\Users\PalmDesert\SysnativeBSODApps\012913-16738-01.dmp]
Built by: 9200.16461.amd64fre.win8_gdr.121119-1606
System Uptime: 0 days 0:08:32.946
*** WARNING: Unable to verify timestamp for bridge.sys
*** ERROR: Module load completed but symbols could not be loaded for bridge.sys
Probably caused by : bridge.sys ( bridge+6ddc )
BugCheck D1, {4, 2, 0, fffff88005d8cddc}
BugCheck Info: DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
Bugcheck code 000000d1
Arguments: 
Arg1: 0000000000000004, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000000, value 0 = read operation, 1 = write operation
Arg4: fffff88005d8cddc, address which referenced memory
BUGCHECK_STR:  AV
DEFAULT_BUCKET_ID:  WIN8_DRIVER_FAULT
PROCESS_NAME:  TRACERT.EXE
FAILURE_BUCKET_ID:  X64_AV_bridge+6ddc
MaxSpeed:     1800
CurrentSpeed: 1809
BiosVersion = F6a
BiosReleaseDate = 07/14/2008
SystemManufacturer = Gigabyte Technology Co., Ltd.
SystemProductName = 945PL-S3P
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Debug session time: Tue Jan 29 03:06:13.207 2013 (UTC - 5:00)
Loading Dump File [C:\Users\PalmDesert\SysnativeBSODApps\012913-16364-01.dmp]
Built by: 9200.16461.amd64fre.win8_gdr.121119-1606
System Uptime: 0 days 0:16:24.011
*** WARNING: Unable to verify timestamp for bridge.sys
*** ERROR: Module load completed but symbols could not be loaded for bridge.sys
*** WARNING: Unable to verify timestamp for VBoxNetFlt.sys
*** ERROR: Module load completed but symbols could not be loaded for VBoxNetFlt.sys
*** ERROR: Module load completed but symbols could not be loaded for raspppoe.sys
*** ERROR: Module load completed but symbols could not be loaded for ndiswan.sys
*** ERROR: Module load completed but symbols could not be loaded for wanarp.sys
Probably caused by : bridge.sys ( bridge+6ddc )
BugCheck D1, {4, 2, 0, fffff880061a5ddc}
BugCheck Info: DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
Bugcheck code 000000d1
Arguments: 
Arg1: 0000000000000004, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000000, value 0 = read operation, 1 = write operation
Arg4: fffff880061a5ddc, address which referenced memory
BUGCHECK_STR:  AV
DEFAULT_BUCKET_ID:  WIN8_DRIVER_FAULT
PROCESS_NAME:  System
FAILURE_BUCKET_ID:  X64_AV_bridge+6ddc
MaxSpeed:     1800
CurrentSpeed: 1809
BiosVersion = F6a
BiosReleaseDate = 07/14/2008
SystemManufacturer = Gigabyte Technology Co., Ltd.
SystemProductName = 945PL-S3P
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Debug session time: Mon Jan 28 14:06:56.205 2013 (UTC - 5:00)
Loading Dump File [C:\Users\PalmDesert\SysnativeBSODApps\012813-16723-01.dmp]
Built by: 9200.16461.amd64fre.win8_gdr.121119-1606
System Uptime: 0 days 0:10:24.009
*** WARNING: Unable to verify timestamp for bridge.sys
*** ERROR: Module load completed but symbols could not be loaded for bridge.sys
*** WARNING: Unable to verify timestamp for VBoxNetFlt.sys
*** ERROR: Module load completed but symbols could not be loaded for VBoxNetFlt.sys
*** ERROR: Module load completed but symbols could not be loaded for raspppoe.sys
*** ERROR: Module load completed but symbols could not be loaded for ndiswan.sys
*** ERROR: Module load completed but symbols could not be loaded for wanarp.sys
Probably caused by : bridge.sys ( bridge+6ddc )
BugCheck D1, {4, 2, 0, fffff88005d9dddc}
BugCheck Info: DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
Bugcheck code 000000d1
Arguments: 
Arg1: 0000000000000004, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000000, value 0 = read operation, 1 = write operation
Arg4: fffff88005d9dddc, address which referenced memory
BUGCHECK_STR:  AV
DEFAULT_BUCKET_ID:  WIN8_DRIVER_FAULT
PROCESS_NAME:  System
FAILURE_BUCKET_ID:  X64_AV_bridge+6ddc
MaxSpeed:     1800
CurrentSpeed: 1809
BiosVersion = F6a
BiosReleaseDate = 07/14/2008
SystemManufacturer = Gigabyte Technology Co., Ltd.
SystemProductName = 945PL-S3P
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Debug session time: Mon Jan 28 13:32:51.702 2013 (UTC - 5:00)
Loading Dump File [C:\Users\PalmDesert\SysnativeBSODApps\012813-18564-01.dmp]
Built by: 9200.16461.amd64fre.win8_gdr.121119-1606
System Uptime: 0 days 0:06:58.507
*** WARNING: Unable to verify timestamp for bridge.sys
*** ERROR: Module load completed but symbols could not be loaded for bridge.sys
*** WARNING: Unable to verify timestamp for VBoxNetFlt.sys
*** ERROR: Module load completed but symbols could not be loaded for VBoxNetFlt.sys
*** ERROR: Module load completed but symbols could not be loaded for raspppoe.sys
*** ERROR: Module load completed but symbols could not be loaded for ndiswan.sys
*** ERROR: Module load completed but symbols could not be loaded for wanarp.sys
Probably caused by : bridge.sys ( bridge+6ddc )
BugCheck D1, {4, 2, 0, fffff880061a3ddc}
BugCheck Info: DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
Bugcheck code 000000d1
Arguments: 
Arg1: 0000000000000004, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000000, value 0 = read operation, 1 = write operation
Arg4: fffff880061a3ddc, address which referenced memory
BUGCHECK_STR:  AV
DEFAULT_BUCKET_ID:  WIN8_DRIVER_FAULT
PROCESS_NAME:  System
FAILURE_BUCKET_ID:  X64_AV_bridge+6ddc
MaxSpeed:     1800
CurrentSpeed: 1809
BiosVersion = F6a
BiosReleaseDate = 07/14/2008
SystemManufacturer = Gigabyte Technology Co., Ltd.
SystemProductName = 945PL-S3P
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Debug session time: Mon Jan 28 12:30:30.701 2013 (UTC - 5:00)
Loading Dump File [C:\Users\PalmDesert\SysnativeBSODApps\012813-15974-01.dmp]
Built by: 9200.16461.amd64fre.win8_gdr.121119-1606
System Uptime: 0 days 0:51:13.505
*** WARNING: Unable to verify timestamp for bridge.sys
*** ERROR: Module load completed but symbols could not be loaded for bridge.sys
*** WARNING: Unable to verify timestamp for VBoxNetFlt.sys
*** ERROR: Module load completed but symbols could not be loaded for VBoxNetFlt.sys
*** ERROR: Module load completed but symbols could not be loaded for raspppoe.sys
*** ERROR: Module load completed but symbols could not be loaded for ndiswan.sys
*** ERROR: Module load completed but symbols could not be loaded for wanarp.sys
Probably caused by : bridge.sys ( bridge+6ddc )
BugCheck D1, {4, 2, 0, fffff88004606ddc}
BugCheck Info: DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
Bugcheck code 000000d1
Arguments: 
Arg1: 0000000000000004, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000000, value 0 = read operation, 1 = write operation
Arg4: fffff88004606ddc, address which referenced memory
BUGCHECK_STR:  AV
DEFAULT_BUCKET_ID:  WIN8_DRIVER_FAULT
PROCESS_NAME:  System
FAILURE_BUCKET_ID:  X64_AV_bridge+6ddc
MaxSpeed:     1800
CurrentSpeed: 1809
BiosVersion = F6a
BiosReleaseDate = 07/14/2008
SystemManufacturer = Gigabyte Technology Co., Ltd.
SystemProductName = 945PL-S3P
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Debug session time: Mon Jan 28 11:38:33.211 2013 (UTC - 5:00)
Loading Dump File [C:\Users\PalmDesert\SysnativeBSODApps\012813-17144-01.dmp]
Built by: 9200.16461.amd64fre.win8_gdr.121119-1606
System Uptime: 0 days 0:53:58.014
*** WARNING: Unable to verify timestamp for bridge.sys
*** ERROR: Module load completed but symbols could not be loaded for bridge.sys
Probably caused by : bridge.sys ( bridge+6ddc )
BugCheck D1, {4, 2, 0, fffff88005806ddc}
BugCheck Info: DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
Bugcheck code 000000d1
Arguments: 
Arg1: 0000000000000004, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000000, value 0 = read operation, 1 = write operation
Arg4: fffff88005806ddc, address which referenced memory
BUGCHECK_STR:  AV
DEFAULT_BUCKET_ID:  WIN8_DRIVER_FAULT
PROCESS_NAME:  System
FAILURE_BUCKET_ID:  X64_AV_bridge+6ddc
MaxSpeed:     1800
CurrentSpeed: 1809
BiosVersion = F6a
BiosReleaseDate = 07/14/2008
SystemManufacturer = Gigabyte Technology Co., Ltd.
SystemProductName = 945PL-S3P
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Debug session time: Mon Jan 28 10:43:56.211 2013 (UTC - 5:00)
Loading Dump File [C:\Users\PalmDesert\SysnativeBSODApps\012813-15459-01.dmp]
Built by: 9200.16461.amd64fre.win8_gdr.121119-1606
System Uptime: 0 days 0:04:22.013
*** WARNING: Unable to verify timestamp for bridge.sys
*** ERROR: Module load completed but symbols could not be loaded for bridge.sys
Probably caused by : bridge.sys ( bridge+6ddc )
BugCheck D1, {4, 2, 0, fffff88004b62ddc}
BugCheck Info: DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
Bugcheck code 000000d1
Arguments: 
Arg1: 0000000000000004, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000000, value 0 = read operation, 1 = write operation
Arg4: fffff88004b62ddc, address which referenced memory
BUGCHECK_STR:  AV
DEFAULT_BUCKET_ID:  WIN8_DRIVER_FAULT
PROCESS_NAME:  System
FAILURE_BUCKET_ID:  X64_AV_bridge+6ddc
MaxSpeed:     1800
CurrentSpeed: 1809
BiosVersion = F6a
BiosReleaseDate = 07/14/2008
SystemManufacturer = Gigabyte Technology Co., Ltd.
SystemProductName = 945PL-S3P
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Debug session time: Mon Jan 28 07:01:19.196 2013 (UTC - 5:00)
Loading Dump File [C:\Users\PalmDesert\SysnativeBSODApps\012813-25053-01.dmp]
Built by: 9200.16461.amd64fre.win8_gdr.121119-1606
System Uptime: 0 days 1:23:27.000
*** WARNING: Unable to verify timestamp for bridge.sys
*** ERROR: Module load completed but symbols could not be loaded for bridge.sys
*** WARNING: Unable to verify timestamp for VBoxNetFlt.sys
*** ERROR: Module load completed but symbols could not be loaded for VBoxNetFlt.sys
*** ERROR: Module load completed but symbols could not be loaded for raspppoe.sys
*** ERROR: Module load completed but symbols could not be loaded for ndiswan.sys
*** ERROR: Module load completed but symbols could not be loaded for wanarp.sys
Probably caused by : bridge.sys ( bridge+6ddc )
BugCheck D1, {4, 2, 0, fffff88005406ddc}
BugCheck Info: DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
Bugcheck code 000000d1
Arguments: 
Arg1: 0000000000000004, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000000, value 0 = read operation, 1 = write operation
Arg4: fffff88005406ddc, address which referenced memory
BUGCHECK_STR:  AV
DEFAULT_BUCKET_ID:  WIN8_DRIVER_FAULT
PROCESS_NAME:  System
FAILURE_BUCKET_ID:  X64_AV_bridge+6ddc
MaxSpeed:     1800
CurrentSpeed: 1809
BiosVersion = F6a
BiosReleaseDate = 07/14/2008
SystemManufacturer = Gigabyte Technology Co., Ltd.
SystemProductName = 945PL-S3P
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Debug session time: Mon Jan 28 05:37:07.660 2013 (UTC - 5:00)
Loading Dump File [C:\Users\PalmDesert\SysnativeBSODApps\012813-16208-01.dmp]
Built by: 9200.16461.amd64fre.win8_gdr.121119-1606
System Uptime: 0 days 1:09:27.504
*** WARNING: Unable to verify timestamp for bridge.sys
*** ERROR: Module load completed but symbols could not be loaded for bridge.sys
Probably caused by : bridge.sys ( bridge+6ddc )
BugCheck D1, {4, 2, 0, fffff88004956ddc}
BugCheck Info: DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
Bugcheck code 000000d1
Arguments: 
Arg1: 0000000000000004, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000000, value 0 = read operation, 1 = write operation
Arg4: fffff88004956ddc, address which referenced memory
BUGCHECK_STR:  AV
DEFAULT_BUCKET_ID:  WIN8_DRIVER_FAULT
PROCESS_NAME:  System
FAILURE_BUCKET_ID:  X64_AV_bridge+6ddc
MaxSpeed:     1800
CurrentSpeed: 1809
BiosVersion = F6a
BiosReleaseDate = 07/14/2008
SystemManufacturer = Gigabyte Technology Co., Ltd.
SystemProductName = 945PL-S3P
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Debug session time: Mon Jan 28 04:27:00.196 2013 (UTC - 5:00)
Loading Dump File [C:\Users\PalmDesert\SysnativeBSODApps\012813-27175-01.dmp]
Built by: 9200.16461.amd64fre.win8_gdr.121119-1606
System Uptime: 0 days 0:44:31.000
*** WARNING: Unable to verify timestamp for bridge.sys
*** ERROR: Module load completed but symbols could not be loaded for bridge.sys
Probably caused by : bridge.sys ( bridge+6ddc )
BugCheck D1, {4, 2, 0, fffff880053b2ddc}
BugCheck Info: DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
Bugcheck code 000000d1
Arguments: 
Arg1: 0000000000000004, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000000, value 0 = read operation, 1 = write operation
Arg4: fffff880053b2ddc, address which referenced memory
BUGCHECK_STR:  AV
DEFAULT_BUCKET_ID:  WIN8_DRIVER_FAULT
PROCESS_NAME:  System
FAILURE_BUCKET_ID:  X64_AV_bridge+6ddc
MaxSpeed:     1800
CurrentSpeed: 1809
BiosVersion = F6a
BiosReleaseDate = 07/14/2008
SystemManufacturer = Gigabyte Technology Co., Ltd.
SystemProductName = 945PL-S3P
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Debug session time: Mon Jan 28 03:41:49.707 2013 (UTC - 5:00)
Loading Dump File [C:\Users\PalmDesert\SysnativeBSODApps\012813-17908-01.dmp]
Built by: 9200.16461.amd64fre.win8_gdr.121119-1606
System Uptime: 0 days 1:04:40.511
*** WARNING: Unable to verify timestamp for bridge.sys
*** ERROR: Module load completed but symbols could not be loaded for bridge.sys
Probably caused by : bridge.sys ( bridge+6ddc )
BugCheck D1, {4, 2, 0, fffff88005606ddc}
BugCheck Info: DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
Bugcheck code 000000d1
Arguments: 
Arg1: 0000000000000004, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000000, value 0 = read operation, 1 = write operation
Arg4: fffff88005606ddc, address which referenced memory
BUGCHECK_STR:  AV
DEFAULT_BUCKET_ID:  WIN8_DRIVER_FAULT
PROCESS_NAME:  ekrn.exe
FAILURE_BUCKET_ID:  X64_AV_bridge+6ddc
MaxSpeed:     1800
CurrentSpeed: 1809
BiosVersion = F6a
BiosReleaseDate = 07/14/2008
SystemManufacturer = Gigabyte Technology Co., Ltd.
SystemProductName = 945PL-S3P
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Debug session time: Mon Jan 28 02:36:29.706 2013 (UTC - 5:00)
Loading Dump File [C:\Users\PalmDesert\SysnativeBSODApps\012813-18439-01.dmp]
Built by: 9200.16461.amd64fre.win8_gdr.121119-1606
System Uptime: 0 days 0:03:07.511
*** WARNING: Unable to verify timestamp for bridge.sys
*** ERROR: Module load completed but symbols could not be loaded for bridge.sys
Probably caused by : bridge.sys ( bridge+6ddc )
BugCheck D1, {4, 2, 0, fffff88004606ddc}
BugCheck Info: DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
Bugcheck code 000000d1
Arguments: 
Arg1: 0000000000000004, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000000, value 0 = read operation, 1 = write operation
Arg4: fffff88004606ddc, address which referenced memory
BUGCHECK_STR:  AV
DEFAULT_BUCKET_ID:  WIN8_DRIVER_FAULT
PROCESS_NAME:  firefox.exe
FAILURE_BUCKET_ID:  X64_AV_bridge+6ddc
MaxSpeed:     1800
CurrentSpeed: 1809
BiosVersion = F6a
BiosReleaseDate = 07/14/2008
SystemManufacturer = Gigabyte Technology Co., Ltd.
SystemProductName = 945PL-S3P
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Debug session time: Mon Jan 28 02:32:40.210 2013 (UTC - 5:00)
Loading Dump File [C:\Users\PalmDesert\SysnativeBSODApps\012813-16832-01.dmp]
Built by: 9200.16461.amd64fre.win8_gdr.121119-1606
System Uptime: 0 days 8:23:52.014
*** WARNING: Unable to verify timestamp for bridge.sys
*** ERROR: Module load completed but symbols could not be loaded for bridge.sys
*** WARNING: Unable to verify timestamp for VBoxNetFlt.sys
*** ERROR: Module load completed but symbols could not be loaded for VBoxNetFlt.sys
*** ERROR: Module load completed but symbols could not be loaded for raspppoe.sys
*** ERROR: Module load completed but symbols could not be loaded for ndiswan.sys
*** ERROR: Module load completed but symbols could not be loaded for wanarp.sys
Probably caused by : bridge.sys ( bridge+6ddc )
BugCheck D1, {4, 2, 0, fffff88004d6addc}
BugCheck Info: DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
Bugcheck code 000000d1
Arguments: 
Arg1: 0000000000000004, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000000, value 0 = read operation, 1 = write operation
Arg4: fffff88004d6addc, address which referenced memory
BUGCHECK_STR:  AV
DEFAULT_BUCKET_ID:  WIN8_DRIVER_FAULT
PROCESS_NAME:  System
FAILURE_BUCKET_ID:  X64_AV_bridge+6ddc
MaxSpeed:     1800
CurrentSpeed: 1809
BiosVersion = F6a
BiosReleaseDate = 07/14/2008
SystemManufacturer = Gigabyte Technology Co., Ltd.
SystemProductName = 945PL-S3P
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Debug session time: Sun Jan 27 15:52:15.705 2013 (UTC - 5:00)
Loading Dump File [C:\Users\PalmDesert\SysnativeBSODApps\012813-15490-01.dmp]
Built by: 9200.16461.amd64fre.win8_gdr.121119-1606
System Uptime: 0 days 0:09:38.509
*** WARNING: Unable to verify timestamp for bridge.sys
*** ERROR: Module load completed but symbols could not be loaded for bridge.sys
Probably caused by : bridge.sys ( bridge+6ddc )
BugCheck D1, {4, 2, 0, fffff88005806ddc}
BugCheck Info: DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
Bugcheck code 000000d1
Arguments: 
Arg1: 0000000000000004, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000000, value 0 = read operation, 1 = write operation
Arg4: fffff88005806ddc, address which referenced memory
BUGCHECK_STR:  AV
DEFAULT_BUCKET_ID:  WIN8_DRIVER_FAULT
PROCESS_NAME:  firefox.exe
FAILURE_BUCKET_ID:  X64_AV_bridge+6ddc
MaxSpeed:     1800
CurrentSpeed: 1809
BiosVersion = F6a
BiosReleaseDate = 07/14/2008
SystemManufacturer = Gigabyte Technology Co., Ltd.
SystemProductName = 945PL-S3P
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Debug session time: Sun Jan 27 15:41:57.206 2013 (UTC - 5:00)
Loading Dump File [C:\Users\PalmDesert\SysnativeBSODApps\012813-16333-01.dmp]
Built by: 9200.16461.amd64fre.win8_gdr.121119-1606
System Uptime: 0 days 1:22:33.010
*** WARNING: Unable to verify timestamp for bridge.sys
*** ERROR: Module load completed but symbols could not be loaded for bridge.sys
*** WARNING: Unable to verify timestamp for ipnat.sys
*** ERROR: Module load completed but symbols could not be loaded for ipnat.sys
Probably caused by : bridge.sys ( bridge+6ddc )
BugCheck D1, {4, 2, 0, fffff88005406ddc}
BugCheck Info: DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
Bugcheck code 000000d1
Arguments: 
Arg1: 0000000000000004, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000000, value 0 = read operation, 1 = write operation
Arg4: fffff88005406ddc, address which referenced memory
BUGCHECK_STR:  AV
DEFAULT_BUCKET_ID:  WIN8_DRIVER_FAULT
PROCESS_NAME:  System
FAILURE_BUCKET_ID:  X64_AV_bridge+6ddc
MaxSpeed:     1800
CurrentSpeed: 1809
BiosVersion = F6a
BiosReleaseDate = 07/14/2008
SystemManufacturer = Gigabyte Technology Co., Ltd.
SystemProductName = 945PL-S3P
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Debug session time: Sun Jan 27 14:18:44.203 2013 (UTC - 5:00)
Loading Dump File [C:\Users\PalmDesert\SysnativeBSODApps\012713-16364-01.dmp]
Built by: 9200.16461.amd64fre.win8_gdr.121119-1606
System Uptime: 0 days 0:46:20.008
*** WARNING: Unable to verify timestamp for bridge.sys
*** ERROR: Module load completed but symbols could not be loaded for bridge.sys
*** WARNING: Unable to verify timestamp for ipnat.sys
*** ERROR: Module load completed but symbols could not be loaded for ipnat.sys
Probably caused by : bridge.sys ( bridge+6ddc )
BugCheck D1, {4, 2, 0, fffff88005a5fddc}
BugCheck Info: DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
Bugcheck code 000000d1
Arguments: 
Arg1: 0000000000000004, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000000, value 0 = read operation, 1 = write operation
Arg4: fffff88005a5fddc, address which referenced memory
BUGCHECK_STR:  AV
DEFAULT_BUCKET_ID:  WIN8_DRIVER_FAULT
PROCESS_NAME:  System
FAILURE_BUCKET_ID:  X64_AV_bridge+6ddc
MaxSpeed:     1800
CurrentSpeed: 1809
BiosVersion = F6a
BiosReleaseDate = 07/14/2008
SystemManufacturer = Gigabyte Technology Co., Ltd.
SystemProductName = 945PL-S3P
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Debug session time: Sun Jan 27 13:09:00.697 2013 (UTC - 5:00)
Loading Dump File [C:\Users\PalmDesert\SysnativeBSODApps\012713-16426-01.dmp]
Built by: 9200.16461.amd64fre.win8_gdr.121119-1606
System Uptime: 0 days 1:21:30.500
*** WARNING: Unable to verify timestamp for bridge.sys
*** ERROR: Module load completed but symbols could not be loaded for bridge.sys
*** WARNING: Unable to verify timestamp for ipnat.sys
*** ERROR: Module load completed but symbols could not be loaded for ipnat.sys
Probably caused by : bridge.sys ( bridge+6ddc )
BugCheck D1, {4, 2, 0, fffff880061b5ddc}
BugCheck Info: DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
Bugcheck code 000000d1
Arguments: 
Arg1: 0000000000000004, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000000, value 0 = read operation, 1 = write operation
Arg4: fffff880061b5ddc, address which referenced memory
BUGCHECK_STR:  AV
DEFAULT_BUCKET_ID:  WIN8_DRIVER_FAULT
PROCESS_NAME:  System
FAILURE_BUCKET_ID:  X64_AV_bridge+6ddc
MaxSpeed:     1800
CurrentSpeed: 1809
BiosVersion = F6a
BiosReleaseDate = 07/14/2008
SystemManufacturer = Gigabyte Technology Co., Ltd.
SystemProductName = 945PL-S3P
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Debug session time: Sun Jan 27 11:46:49.697 2013 (UTC - 5:00)
Loading Dump File [C:\Users\PalmDesert\SysnativeBSODApps\012713-14882-01.dmp]
Built by: 9200.16461.amd64fre.win8_gdr.121119-1606
System Uptime: 0 days 0:10:05.500
*** WARNING: Unable to verify timestamp for bridge.sys
*** ERROR: Module load completed but symbols could not be loaded for bridge.sys
Probably caused by : bridge.sys ( bridge+6ddc )
BugCheck D1, {4, 2, 0, fffff880059afddc}
BugCheck Info: DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
Bugcheck code 000000d1
Arguments: 
Arg1: 0000000000000004, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000000, value 0 = read operation, 1 = write operation
Arg4: fffff880059afddc, address which referenced memory
BUGCHECK_STR:  AV
DEFAULT_BUCKET_ID:  WIN8_DRIVER_FAULT
PROCESS_NAME:  System
FAILURE_BUCKET_ID:  X64_AV_bridge+6ddc
MaxSpeed:     1800
CurrentSpeed: 1809
BiosVersion = F6a
BiosReleaseDate = 07/14/2008
SystemManufacturer = Gigabyte Technology Co., Ltd.
SystemProductName = 945PL-S3P
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Debug session time: Sun Jan 27 11:36:04.212 2013 (UTC - 5:00)
Loading Dump File [C:\Users\PalmDesert\SysnativeBSODApps\012713-20404-01.dmp]
Built by: 9200.16461.amd64fre.win8_gdr.121119-1606
System Uptime: 0 days 0:02:37.015
*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
Probably caused by : nvlddmkm.sys ( nvlddmkm+14ba88 )
BugCheck 116, {fffffa8002bb8010, fffff8800437ca88, 0, 2}
BugCheck Info: VIDEO_TDR_FAILURE (116)
Bugcheck code 00000116
Arguments: 
Arg1: fffffa8002bb8010, Optional pointer to internal TDR recovery context (TDR_RECOVERY_CONTEXT).
Arg2: fffff8800437ca88, The pointer into responsible device driver module (e.g. owner tag).
Arg3: 0000000000000000, Optional error code (NTSTATUS) of the last failed operation.
Arg4: 0000000000000002, Optional internal context dependent data.
BUGCHECK_STR:  0x116
DEFAULT_BUCKET_ID:  GRAPHICS_DRIVER_TDR_FAULT
PROCESS_NAME:  System
FAILURE_BUCKET_ID:  X64_0x116_IMAGE_nvlddmkm.sys
MaxSpeed:     1800
CurrentSpeed: 1809
BiosVersion = F6a
BiosReleaseDate = 07/14/2008
SystemManufacturer = Gigabyte Technology Co., Ltd.
SystemProductName = 945PL-S3P
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Debug session time: Sun Jan 27 11:32:46.200 2013 (UTC - 5:00)
Loading Dump File [C:\Users\PalmDesert\SysnativeBSODApps\012713-15459-01.dmp]
Built by: 9200.16461.amd64fre.win8_gdr.121119-1606
System Uptime: 0 days 0:06:10.002
*** WARNING: Unable to verify timestamp for bridge.sys
*** ERROR: Module load completed but symbols could not be loaded for bridge.sys
*** ERROR: Module load completed but symbols could not be loaded for ipnat.sys
Probably caused by : bridge.sys ( bridge+6ddc )
BugCheck D1, {4, 2, 0, fffff880013d2ddc}
BugCheck Info: DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
Bugcheck code 000000d1
Arguments: 
Arg1: 0000000000000004, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000000, value 0 = read operation, 1 = write operation
Arg4: fffff880013d2ddc, address which referenced memory
BUGCHECK_STR:  AV
DEFAULT_BUCKET_ID:  WIN8_DRIVER_FAULT
PROCESS_NAME:  System
FAILURE_BUCKET_ID:  X64_AV_bridge+6ddc
MaxSpeed:     1800
CurrentSpeed: 1809
BiosVersion = F6a
BiosReleaseDate = 07/14/2008
SystemManufacturer = Gigabyte Technology Co., Ltd.
SystemProductName = 945PL-S3P
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Debug session time: Sun Jan 27 11:25:53.199 2013 (UTC - 5:00)
Loading Dump File [C:\Users\PalmDesert\SysnativeBSODApps\012713-14976-01.dmp]
Built by: 9200.16461.amd64fre.win8_gdr.121119-1606
System Uptime: 0 days 2:40:49.005
*** WARNING: Unable to verify timestamp for bridge.sys
*** ERROR: Module load completed but symbols could not be loaded for bridge.sys
*** ERROR: Module load completed but symbols could not be loaded for ipnat.sys
Probably caused by : bridge.sys ( bridge+6ddc )
BugCheck D1, {4, 2, 0, fffff88004a51ddc}
BugCheck Info: DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
Bugcheck code 000000d1
Arguments: 
Arg1: 0000000000000004, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000000, value 0 = read operation, 1 = write operation
Arg4: fffff88004a51ddc, address which referenced memory
BUGCHECK_STR:  AV
DEFAULT_BUCKET_ID:  WIN8_DRIVER_FAULT
PROCESS_NAME:  System
FAILURE_BUCKET_ID:  X64_AV_bridge+6ddc
MaxSpeed:     1800
CurrentSpeed: 1809
BiosVersion = F6a
BiosReleaseDate = 07/14/2008
SystemManufacturer = Gigabyte Technology Co., Ltd.
SystemProductName = 945PL-S3P
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Debug session time: Sun Jan 27 08:43:05.701 2013 (UTC - 5:00)
Loading Dump File [C:\Users\PalmDesert\SysnativeBSODApps\012713-15568-01.dmp]
Built by: 9200.16461.amd64fre.win8_gdr.121119-1606
System Uptime: 0 days 1:09:45.504
*** WARNING: Unable to verify timestamp for bridge.sys
*** ERROR: Module load completed but symbols could not be loaded for bridge.sys
*** ERROR: Module load completed but symbols could not be loaded for ipnat.sys
Probably caused by : bridge.sys ( bridge+6ddc )
BugCheck D1, {4, 2, 0, fffff8800594eddc}
BugCheck Info: DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
Bugcheck code 000000d1
Arguments: 
Arg1: 0000000000000004, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000000, value 0 = read operation, 1 = write operation
Arg4: fffff8800594eddc, address which referenced memory
BUGCHECK_STR:  AV
DEFAULT_BUCKET_ID:  WIN8_DRIVER_FAULT
PROCESS_NAME:  System
FAILURE_BUCKET_ID:  X64_AV_bridge+6ddc
MaxSpeed:     1800
CurrentSpeed: 1809
BiosVersion = F6a
BiosReleaseDate = 07/14/2008
SystemManufacturer = Gigabyte Technology Co., Ltd.
SystemProductName = 945PL-S3P
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Debug session time: Sun Jan 27 07:25:32.206 2013 (UTC - 5:00)
Loading Dump File [C:\Users\PalmDesert\SysnativeBSODApps\012713-22198-01.dmp]
Built by: 9200.16461.amd64fre.win8_gdr.121119-1606
System Uptime: 0 days 1:13:34.010
*** WARNING: Unable to verify timestamp for bridge.sys
*** ERROR: Module load completed but symbols could not be loaded for bridge.sys
*** WARNING: Unable to verify timestamp for VBoxNetFlt.sys
*** ERROR: Module load completed but symbols could not be loaded for VBoxNetFlt.sys
*** ERROR: Module load completed but symbols could not be loaded for raspppoe.sys
*** ERROR: Module load completed but symbols could not be loaded for ndiswan.sys
*** ERROR: Module load completed but symbols could not be loaded for wanarp.sys
Probably caused by : bridge.sys ( bridge+6ddc )
BugCheck D1, {4, 2, 0, fffff88005242ddc}
BugCheck Info: DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
Bugcheck code 000000d1
Arguments: 
Arg1: 0000000000000004, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000000, value 0 = read operation, 1 = write operation
Arg4: fffff88005242ddc, address which referenced memory
BUGCHECK_STR:  AV
DEFAULT_BUCKET_ID:  WIN8_DRIVER_FAULT
PROCESS_NAME:  System
FAILURE_BUCKET_ID:  X64_AV_bridge+6ddc
MaxSpeed:     1800
CurrentSpeed: 1809
BiosVersion = F6a
BiosReleaseDate = 07/14/2008
SystemManufacturer = Gigabyte Technology Co., Ltd.
SystemProductName = 945PL-S3P
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Debug session time: Sat Jan 26 16:07:34.719 2013 (UTC - 5:00)
Loading Dump File [C:\Users\PalmDesert\SysnativeBSODApps\012713-16255-01.dmp]
Built by: 9200.16461.amd64fre.win8_gdr.121119-1606
System Uptime: 0 days 0:33:11.514
*** WARNING: Unable to verify timestamp for bridge.sys
*** ERROR: Module load completed but symbols could not be loaded for bridge.sys
Probably caused by : bridge.sys ( bridge+6ddc )
BugCheck D1, {4, 2, 0, fffff8800441addc}
BugCheck Info: DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
Bugcheck code 000000d1
Arguments: 
Arg1: 0000000000000004, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000000, value 0 = read operation, 1 = write operation
Arg4: fffff8800441addc, address which referenced memory
BUGCHECK_STR:  AV
DEFAULT_BUCKET_ID:  WIN8_DRIVER_FAULT
PROCESS_NAME:  System
FAILURE_BUCKET_ID:  X64_AV_bridge+6ddc
MaxSpeed:     1800
CurrentSpeed: 1809
BiosVersion = F6a
BiosReleaseDate = 07/14/2008
SystemManufacturer = Gigabyte Technology Co., Ltd.
SystemProductName = 945PL-S3P
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Debug session time: Sat Jan 26 15:33:43.720 2013 (UTC - 5:00)
Loading Dump File [C:\Users\PalmDesert\SysnativeBSODApps\012713-15849-01.dmp]
Built by: 9200.16461.amd64fre.win8_gdr.121119-1606
System Uptime: 0 days 0:06:21.514
*** WARNING: Unable to verify timestamp for bridge.sys
*** ERROR: Module load completed but symbols could not be loaded for bridge.sys
*** WARNING: Unable to verify timestamp for VBoxNetFlt.sys
*** ERROR: Module load completed but symbols could not be loaded for VBoxNetFlt.sys
*** ERROR: Module load completed but symbols could not be loaded for raspppoe.sys
*** ERROR: Module load completed but symbols could not be loaded for ndiswan.sys
*** ERROR: Module load completed but symbols could not be loaded for wanarp.sys
Probably caused by : bridge.sys ( bridge+6ddc )
BugCheck D1, {4, 2, 0, fffff88004250ddc}
BugCheck Info: DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
Bugcheck code 000000d1
Arguments: 
Arg1: 0000000000000004, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000000, value 0 = read operation, 1 = write operation
Arg4: fffff88004250ddc, address which referenced memory
BUGCHECK_STR:  AV
DEFAULT_BUCKET_ID:  WIN8_DRIVER_FAULT
PROCESS_NAME:  System
FAILURE_BUCKET_ID:  X64_AV_bridge+6ddc
MaxSpeed:     1800
CurrentSpeed: 1809
BiosVersion = F6a
BiosReleaseDate = 07/14/2008
SystemManufacturer = Gigabyte Technology Co., Ltd.
SystemProductName = 945PL-S3P
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Debug session time: Sat Jan 26 15:26:39.707 2013 (UTC - 5:00)
Loading Dump File [C:\Users\PalmDesert\SysnativeBSODApps\012613-15615-01.dmp]
Built by: 9200.16461.amd64fre.win8_gdr.121119-1606
System Uptime: 0 days 1:11:42.500
*** WARNING: Unable to verify timestamp for bridge.sys
*** ERROR: Module load completed but symbols could not be loaded for bridge.sys
*** WARNING: Unable to verify timestamp for VBoxNetFlt.sys
*** ERROR: Module load completed but symbols could not be loaded for VBoxNetFlt.sys
*** ERROR: Module load completed but symbols could not be loaded for raspppoe.sys
*** ERROR: Module load completed but symbols could not be loaded for ndiswan.sys
*** ERROR: Module load completed but symbols could not be loaded for wanarp.sys
Probably caused by : bridge.sys ( bridge+6ddc )
BugCheck D1, {4, 2, 0, fffff88005606ddc}
BugCheck Info: DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
Bugcheck code 000000d1
Arguments: 
Arg1: 0000000000000004, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000000, value 0 = read operation, 1 = write operation
Arg4: fffff88005606ddc, address which referenced memory
BUGCHECK_STR:  AV
DEFAULT_BUCKET_ID:  WIN8_DRIVER_FAULT
PROCESS_NAME:  System
FAILURE_BUCKET_ID:  X64_AV_bridge+6ddc
MaxSpeed:     1800
CurrentSpeed: 1809
BiosVersion = F6a
BiosReleaseDate = 07/14/2008
SystemManufacturer = Gigabyte Technology Co., Ltd.
SystemProductName = 945PL-S3P
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Debug session time: Sat Jan 26 14:14:18.206 2013 (UTC - 5:00)
Loading Dump File [C:\Users\PalmDesert\SysnativeBSODApps\012613-15662-01.dmp]
Built by: 9200.16461.amd64fre.win8_gdr.121119-1606
System Uptime: 0 days 0:04:38.000
*** WARNING: Unable to verify timestamp for bridge.sys
*** ERROR: Module load completed but symbols could not be loaded for bridge.sys
Probably caused by : bridge.sys ( bridge+6ddc )
BugCheck D1, {4, 2, 0, fffff88004b60ddc}
BugCheck Info: DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
Bugcheck code 000000d1
Arguments: 
Arg1: 0000000000000004, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000000, value 0 = read operation, 1 = write operation
Arg4: fffff88004b60ddc, address which referenced memory
BUGCHECK_STR:  AV
DEFAULT_BUCKET_ID:  WIN8_DRIVER_FAULT
PROCESS_NAME:  KMPlayer.exe
FAILURE_BUCKET_ID:  X64_AV_bridge+6ddc
MaxSpeed:     1800
CurrentSpeed: 1809
BiosVersion = F6a
BiosReleaseDate = 07/14/2008
SystemManufacturer = Gigabyte Technology Co., Ltd.
SystemProductName = 945PL-S3P
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Debug session time: Sat Jan 26 14:09:00.207 2013 (UTC - 5:00)
Loading Dump File [C:\Users\PalmDesert\SysnativeBSODApps\012613-21153-01.dmp]
Built by: 9200.16461.amd64fre.win8_gdr.121119-1606
System Uptime: 0 days 0:29:26.001
*** WARNING: Unable to verify timestamp for bridge.sys
*** ERROR: Module load completed but symbols could not be loaded for bridge.sys
*** WARNING: Unable to verify timestamp for VBoxNetFlt.sys
*** ERROR: Module load completed but symbols could not be loaded for VBoxNetFlt.sys
*** ERROR: Module load completed but symbols could not be loaded for raspppoe.sys
*** ERROR: Module load completed but symbols could not be loaded for ndiswan.sys
*** ERROR: Module load completed but symbols could not be loaded for wanarp.sys
Probably caused by : bridge.sys ( bridge+6ddc )
BugCheck D1, {4, 2, 0, fffff88004293ddc}
BugCheck Info: DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
Bugcheck code 000000d1
Arguments: 
Arg1: 0000000000000004, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000000, value 0 = read operation, 1 = write operation
Arg4: fffff88004293ddc, address which referenced memory
BUGCHECK_STR:  AV
DEFAULT_BUCKET_ID:  WIN8_DRIVER_FAULT
PROCESS_NAME:  System
FAILURE_BUCKET_ID:  X64_AV_bridge+6ddc
MaxSpeed:     1800
CurrentSpeed: 1809
BiosVersion = F6a
BiosReleaseDate = 07/14/2008
SystemManufacturer = Gigabyte Technology Co., Ltd.
SystemProductName = 945PL-S3P
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Debug session time: Sat Jan 26 13:38:54.707 2013 (UTC - 5:00)
Loading Dump File [C:\Users\PalmDesert\SysnativeBSODApps\012613-16520-01.dmp]
Built by: 9200.16461.amd64fre.win8_gdr.121119-1606
System Uptime: 0 days 0:03:12.501
*** WARNING: Unable to verify timestamp for bridge.sys
*** ERROR: Module load completed but symbols could not be loaded for bridge.sys
Probably caused by : bridge.sys ( bridge+6ddc )
BugCheck D1, {4, 2, 0, fffff88005bc7ddc}
BugCheck Info: DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
Bugcheck code 000000d1
Arguments: 
Arg1: 0000000000000004, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000000, value 0 = read operation, 1 = write operation
Arg4: fffff88005bc7ddc, address which referenced memory
BUGCHECK_STR:  AV
DEFAULT_BUCKET_ID:  WIN8_DRIVER_FAULT
PROCESS_NAME:  System
FAILURE_BUCKET_ID:  X64_AV_bridge+6ddc
MaxSpeed:     1800
CurrentSpeed: 1809
BiosVersion = F6a
BiosReleaseDate = 07/14/2008
SystemManufacturer = Gigabyte Technology Co., Ltd.
SystemProductName = 945PL-S3P
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Debug session time: Sat Jan 26 13:35:02.207 2013 (UTC - 5:00)
Loading Dump File [C:\Users\PalmDesert\SysnativeBSODApps\012613-25911-01.dmp]
Built by: 9200.16461.amd64fre.win8_gdr.121119-1606
System Uptime: 0 days 0:10:00.001
*** WARNING: Unable to verify timestamp for bridge.sys
*** ERROR: Module load completed but symbols could not be loaded for bridge.sys
Probably caused by : bridge.sys ( bridge+6ddc )
BugCheck D1, {4, 2, 0, fffff8800494eddc}
BugCheck Info: DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
Bugcheck code 000000d1
Arguments: 
Arg1: 0000000000000004, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000000, value 0 = read operation, 1 = write operation
Arg4: fffff8800494eddc, address which referenced memory
BUGCHECK_STR:  AV
DEFAULT_BUCKET_ID:  WIN8_DRIVER_FAULT
PROCESS_NAME:  System
FAILURE_BUCKET_ID:  X64_AV_bridge+6ddc
MaxSpeed:     1800
CurrentSpeed: 1809
BiosVersion = F6a
BiosReleaseDate = 07/14/2008
SystemManufacturer = Gigabyte Technology Co., Ltd.
SystemProductName = 945PL-S3P
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Debug session time: Sat Jan 26 13:24:22.710 2013 (UTC - 5:00)
Loading Dump File [C:\Users\PalmDesert\SysnativeBSODApps\012613-16286-01.dmp]
Built by: 9200.16461.amd64fre.win8_gdr.121119-1606
System Uptime: 0 days 0:06:10.504
*** WARNING: Unable to verify timestamp for bridge.sys
*** ERROR: Module load completed but symbols could not be loaded for bridge.sys
*** WARNING: Unable to verify timestamp for VBoxNetFlt.sys
*** ERROR: Module load completed but symbols could not be loaded for VBoxNetFlt.sys
*** ERROR: Module load completed but symbols could not be loaded for raspppoe.sys
*** ERROR: Module load completed but symbols could not be loaded for ndiswan.sys
*** ERROR: Module load completed but symbols could not be loaded for wanarp.sys
Probably caused by : bridge.sys ( bridge+6ddc )
BugCheck D1, {4, 2, 0, fffff88005d7bddc}
BugCheck Info: DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
Bugcheck code 000000d1
Arguments: 
Arg1: 0000000000000004, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000000, value 0 = read operation, 1 = write operation
Arg4: fffff88005d7bddc, address which referenced memory
BUGCHECK_STR:  AV
DEFAULT_BUCKET_ID:  WIN8_DRIVER_FAULT
PROCESS_NAME:  firefox.exe
FAILURE_BUCKET_ID:  X64_AV_bridge+6ddc
MaxSpeed:     1800
CurrentSpeed: 1809
BiosVersion = F6a
BiosReleaseDate = 07/14/2008
SystemManufacturer = Gigabyte Technology Co., Ltd.
SystemProductName = 945PL-S3P
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Debug session time: Sat Jan 26 13:17:32.718 2013 (UTC - 5:00)
Loading Dump File [C:\Users\PalmDesert\SysnativeBSODApps\012613-15849-01.dmp]
Built by: 9200.16461.amd64fre.win8_gdr.121119-1606
System Uptime: 0 days 0:03:05.512
*** WARNING: Unable to verify timestamp for bridge.sys
*** ERROR: Module load completed but symbols could not be loaded for bridge.sys
*** WARNING: Unable to verify timestamp for VBoxNetFlt.sys
*** ERROR: Module load completed but symbols could not be loaded for VBoxNetFlt.sys
*** ERROR: Module load completed but symbols could not be loaded for raspppoe.sys
*** ERROR: Module load completed but symbols could not be loaded for ndiswan.sys
*** ERROR: Module load completed but symbols could not be loaded for wanarp.sys
Probably caused by : bridge.sys ( bridge+6ddc )
BugCheck D1, {4, 2, 0, fffff880057c4ddc}
BugCheck Info: DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
Bugcheck code 000000d1
Arguments: 
Arg1: 0000000000000004, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000000, value 0 = read operation, 1 = write operation
Arg4: fffff880057c4ddc, address which referenced memory
BUGCHECK_STR:  AV
DEFAULT_BUCKET_ID:  WIN8_DRIVER_FAULT
PROCESS_NAME:  System
FAILURE_BUCKET_ID:  X64_AV_bridge+6ddc
MaxSpeed:     1800
CurrentSpeed: 1809
BiosVersion = F6a
BiosReleaseDate = 07/14/2008
SystemManufacturer = Gigabyte Technology Co., Ltd.
SystemProductName = 945PL-S3P
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Debug session time: Sat Jan 26 13:13:48.216 2013 (UTC - 5:00)
Loading Dump File [C:\Users\PalmDesert\SysnativeBSODApps\012613-16021-01.dmp]
Built by: 9200.16461.amd64fre.win8_gdr.121119-1606
System Uptime: 0 days 0:05:47.012
*** WARNING: Unable to verify timestamp for bridge.sys
*** ERROR: Module load completed but symbols could not be loaded for bridge.sys
*** WARNING: Unable to verify timestamp for VBoxNetFlt.sys
*** ERROR: Module load completed but symbols could not be loaded for VBoxNetFlt.sys
*** ERROR: Module load completed but symbols could not be loaded for raspppoe.sys
*** ERROR: Module load completed but symbols could not be loaded for ndiswan.sys
*** ERROR: Module load completed but symbols could not be loaded for wanarp.sys
Probably caused by : bridge.sys ( bridge+6ddc )
BugCheck D1, {4, 2, 0, fffff88005a06ddc}
BugCheck Info: DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
Bugcheck code 000000d1
Arguments: 
Arg1: 0000000000000004, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000000, value 0 = read operation, 1 = write operation
Arg4: fffff88005a06ddc, address which referenced memory
BUGCHECK_STR:  AV
DEFAULT_BUCKET_ID:  WIN8_DRIVER_FAULT
PROCESS_NAME:  System
FAILURE_BUCKET_ID:  X64_AV_bridge+6ddc
MaxSpeed:     1800
CurrentSpeed: 1809
BiosVersion = F6a
BiosReleaseDate = 07/14/2008
SystemManufacturer = Gigabyte Technology Co., Ltd.
SystemProductName = 945PL-S3P
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Debug session time: Sat Jan 26 13:07:21.706 2013 (UTC - 5:00)
Loading Dump File [C:\Users\PalmDesert\SysnativeBSODApps\012613-17284-01.dmp]
Built by: 9200.16461.amd64fre.win8_gdr.121119-1606
System Uptime: 0 days 0:07:00.502
*** WARNING: Unable to verify timestamp for bridge.sys
*** ERROR: Module load completed but symbols could not be loaded for bridge.sys
*** WARNING: Unable to verify timestamp for VBoxNetFlt.sys
*** ERROR: Module load completed but symbols could not be loaded for VBoxNetFlt.sys
*** ERROR: Module load completed but symbols could not be loaded for raspppoe.sys
*** ERROR: Module load completed but symbols could not be loaded for ndiswan.sys
*** ERROR: Module load completed but symbols could not be loaded for wanarp.sys
Probably caused by : bridge.sys ( bridge+6ddc )
BugCheck D1, {4, 2, 0, fffff88005d90ddc}
BugCheck Info: DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
Bugcheck code 000000d1
Arguments: 
Arg1: 0000000000000004, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000000, value 0 = read operation, 1 = write operation
Arg4: fffff88005d90ddc, address which referenced memory
BUGCHECK_STR:  AV
DEFAULT_BUCKET_ID:  WIN8_DRIVER_FAULT
PROCESS_NAME:  System
FAILURE_BUCKET_ID:  X64_AV_bridge+6ddc
MaxSpeed:     1800
CurrentSpeed: 1809
BiosVersion = F6a
BiosReleaseDate = 07/14/2008
SystemManufacturer = Gigabyte Technology Co., Ltd.
SystemProductName = 945PL-S3P
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Debug session time: Sat Jan 26 12:59:41.210 2013 (UTC - 5:00)
Loading Dump File [C:\Users\PalmDesert\SysnativeBSODApps\012613-18283-01.dmp]
Built by: 9200.16461.amd64fre.win8_gdr.121119-1606
System Uptime: 0 days 0:07:02.004
*** WARNING: Unable to verify timestamp for bridge.sys
*** ERROR: Module load completed but symbols could not be loaded for bridge.sys
Probably caused by : bridge.sys ( bridge+6ddc )
BugCheck D1, {4, 2, 0, fffff88004990ddc}
BugCheck Info: DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
Bugcheck code 000000d1
Arguments: 
Arg1: 0000000000000004, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000000, value 0 = read operation, 1 = write operation
Arg4: fffff88004990ddc, address which referenced memory
BUGCHECK_STR:  AV
DEFAULT_BUCKET_ID:  WIN8_DRIVER_FAULT
PROCESS_NAME:  System
FAILURE_BUCKET_ID:  X64_AV_bridge+6ddc
MaxSpeed:     1800
CurrentSpeed: 1809
BiosVersion = F6a
BiosReleaseDate = 07/14/2008
SystemManufacturer = Gigabyte Technology Co., Ltd.
SystemProductName = 945PL-S3P
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Debug session time: Sat Jan 26 12:51:59.714 2013 (UTC - 5:00)
Loading Dump File [C:\Users\PalmDesert\SysnativeBSODApps\012613-17253-01.dmp]
Built by: 9200.16461.amd64fre.win8_gdr.121119-1606
System Uptime: 0 days 0:03:28.509
*** WARNING: Unable to verify timestamp for bridge.sys
*** ERROR: Module load completed but symbols could not be loaded for bridge.sys
*** WARNING: Unable to verify timestamp for VBoxNetFlt.sys
*** ERROR: Module load completed but symbols could not be loaded for VBoxNetFlt.sys
*** ERROR: Module load completed but symbols could not be loaded for raspppoe.sys
*** ERROR: Module load completed but symbols could not be loaded for ndiswan.sys
*** ERROR: Module load completed but symbols could not be loaded for wanarp.sys
Probably caused by : bridge.sys ( bridge+6ddc )
BugCheck D1, {4, 2, 0, fffff88004606ddc}
BugCheck Info: DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
Bugcheck code 000000d1
Arguments: 
Arg1: 0000000000000004, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000000, value 0 = read operation, 1 = write operation
Arg4: fffff88004606ddc, address which referenced memory
BUGCHECK_STR:  AV
DEFAULT_BUCKET_ID:  WIN8_DRIVER_FAULT
PROCESS_NAME:  System
FAILURE_BUCKET_ID:  X64_AV_bridge+6ddc
MaxSpeed:     1800
CurrentSpeed: 1809
BiosVersion = F6a
BiosReleaseDate = 07/14/2008
SystemManufacturer = Gigabyte Technology Co., Ltd.
SystemProductName = 945PL-S3P
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Debug session time: Sat Jan 26 12:47:52.216 2013 (UTC - 5:00)
Loading Dump File [C:\Users\PalmDesert\SysnativeBSODApps\012613-26114-01.dmp]
Built by: 9200.16461.amd64fre.win8_gdr.121119-1606
System Uptime: 0 days 1:29:39.010
*** WARNING: Unable to verify timestamp for bridge.sys
*** ERROR: Module load completed but symbols could not be loaded for bridge.sys
*** WARNING: Unable to verify timestamp for VBoxNetFlt.sys
*** ERROR: Module load completed but symbols could not be loaded for VBoxNetFlt.sys
*** ERROR: Module load completed but symbols could not be loaded for raspppoe.sys
*** ERROR: Module load completed but symbols could not be loaded for ndiswan.sys
*** ERROR: Module load completed but symbols could not be loaded for wanarp.sys
Probably caused by : bridge.sys ( bridge+6ddc )
BugCheck D1, {4, 2, 0, fffff88005b44ddc}
BugCheck Info: DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
Bugcheck code 000000d1
Arguments: 
Arg1: 0000000000000004, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000000, value 0 = read operation, 1 = write operation
Arg4: fffff88005b44ddc, address which referenced memory
BUGCHECK_STR:  AV
DEFAULT_BUCKET_ID:  WIN8_DRIVER_FAULT
PROCESS_NAME:  System
FAILURE_BUCKET_ID:  X64_AV_bridge+6ddc
MaxSpeed:     1800
CurrentSpeed: 1809
BiosVersion = F6a
BiosReleaseDate = 07/14/2008
SystemManufacturer = Gigabyte Technology Co., Ltd.
SystemProductName = 945PL-S3P
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Debug session time: Sat Jan 26 11:17:33.718 2013 (UTC - 5:00)
Loading Dump File [C:\Users\PalmDesert\SysnativeBSODApps\012613-15631-01.dmp]
Built by: 9200.16461.amd64fre.win8_gdr.121119-1606
System Uptime: 0 days 0:11:49.509
*** WARNING: Unable to verify timestamp for bridge.sys
*** ERROR: Module load completed but symbols could not be loaded for bridge.sys
Probably caused by : bridge.sys ( bridge+6ddc )
BugCheck D1, {4, 2, 0, fffff880057c2ddc}
BugCheck Info: DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
Bugcheck code 000000d1
Arguments: 
Arg1: 0000000000000004, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000000, value 0 = read operation, 1 = write operation
Arg4: fffff880057c2ddc, address which referenced memory
BUGCHECK_STR:  AV
DEFAULT_BUCKET_ID:  WIN8_DRIVER_FAULT
PROCESS_NAME:  firefox.exe
FAILURE_BUCKET_ID:  X64_AV_bridge+6ddc
MaxSpeed:     1800
CurrentSpeed: 1809
BiosVersion = F6a
BiosReleaseDate = 07/14/2008
SystemManufacturer = Gigabyte Technology Co., Ltd.
SystemProductName = 945PL-S3P
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Debug session time: Sat Jan 26 11:05:01.709 2013 (UTC - 5:00)
Loading Dump File [C:\Users\PalmDesert\SysnativeBSODApps\012613-16801-01.dmp]
Built by: 9200.16461.amd64fre.win8_gdr.121119-1606
System Uptime: 0 days 5:55:36.500
*** WARNING: Unable to verify timestamp for bridge.sys
*** ERROR: Module load completed but symbols could not be loaded for bridge.sys
Probably caused by : bridge.sys ( bridge+6ddc )
BugCheck D1, {4, 2, 0, fffff88005b60ddc}
BugCheck Info: DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
Bugcheck code 000000d1
Arguments: 
Arg1: 0000000000000004, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000000, value 0 = read operation, 1 = write operation
Arg4: fffff88005b60ddc, address which referenced memory
BUGCHECK_STR:  AV
DEFAULT_BUCKET_ID:  WIN8_DRIVER_FAULT
PROCESS_NAME:  System
FAILURE_BUCKET_ID:  X64_AV_bridge+6ddc
MaxSpeed:     1800
CurrentSpeed: 1809
BiosVersion = F6a
BiosReleaseDate = 07/14/2008
SystemManufacturer = Gigabyte Technology Co., Ltd.
SystemProductName = 945PL-S3P
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Debug session time: Sat Jan 26 01:07:31.215 2013 (UTC - 5:00)
Loading Dump File [C:\Users\PalmDesert\SysnativeBSODApps\012613-25677-01.dmp]
Built by: 9200.16461.amd64fre.win8_gdr.121119-1606
System Uptime: 0 days 8:37:55.009
*** WARNING: Unable to verify timestamp for bridge.sys
*** ERROR: Module load completed but symbols could not be loaded for bridge.sys
*** WARNING: Unable to verify timestamp for VBoxNetFlt.sys
*** ERROR: Module load completed but symbols could not be loaded for VBoxNetFlt.sys
*** ERROR: Module load completed but symbols could not be loaded for raspppoe.sys
*** ERROR: Module load completed but symbols could not be loaded for ndiswan.sys
*** ERROR: Module load completed but symbols could not be loaded for wanarp.sys
Probably caused by : bridge.sys ( bridge+6ddc )
BugCheck D1, {4, 2, 0, fffff88005dddddc}
BugCheck Info: DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
Bugcheck code 000000d1
Arguments: 
Arg1: 0000000000000004, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000000, value 0 = read operation, 1 = write operation
Arg4: fffff88005dddddc, address which referenced memory
BUGCHECK_STR:  AV
DEFAULT_BUCKET_ID:  WIN8_DRIVER_FAULT
PROCESS_NAME:  System
FAILURE_BUCKET_ID:  X64_AV_bridge+6ddc
MaxSpeed:     1800
CurrentSpeed: 1809
BiosVersion = F6a
BiosReleaseDate = 07/14/2008
SystemManufacturer = Gigabyte Technology Co., Ltd.
SystemProductName = 945PL-S3P
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Debug session time: Fri Jan 25 11:05:56.210 2013 (UTC - 5:00)
Loading Dump File [C:\Users\PalmDesert\SysnativeBSODApps\012513-24304-01.dmp]
Built by: 9200.16461.amd64fre.win8_gdr.121119-1606
System Uptime: 0 days 20:29:53.003
*** WARNING: Unable to verify timestamp for bridge.sys
*** ERROR: Module load completed but symbols could not be loaded for bridge.sys
Probably caused by : bridge.sys ( bridge+6ddc )
BugCheck D1, {4, 2, 0, fffff8800541addc}
BugCheck Info: DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
Bugcheck code 000000d1
Arguments: 
Arg1: 0000000000000004, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000000, value 0 = read operation, 1 = write operation
Arg4: fffff8800541addc, address which referenced memory
BUGCHECK_STR:  AV
DEFAULT_BUCKET_ID:  WIN8_DRIVER_FAULT
PROCESS_NAME:  System
FAILURE_BUCKET_ID:  X64_AV_bridge+6ddc
MaxSpeed:     1800
CurrentSpeed: 1809
BiosVersion = F6a
BiosReleaseDate = 07/14/2008
SystemManufacturer = Gigabyte Technology Co., Ltd.
SystemProductName = 945PL-S3P
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Debug session time: Thu Jan 17 02:31:45.342 2013 (UTC - 5:00)
Loading Dump File [C:\Users\PalmDesert\SysnativeBSODApps\011713-17815-01.dmp]
Built by: 9200.16461.amd64fre.win8_gdr.121119-1606
System Uptime: 0 days 0:01:28.136
*** WARNING: Unable to verify timestamp for bridge.sys
*** ERROR: Module load completed but symbols could not be loaded for bridge.sys
Probably caused by : bridge.sys ( bridge+6ddc )
BugCheck D1, {4, 2, 0, fffff88005b9dddc}
BugCheck Info: DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
Bugcheck code 000000d1
Arguments: 
Arg1: 0000000000000004, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000000, value 0 = read operation, 1 = write operation
Arg4: fffff88005b9dddc, address which referenced memory
BUGCHECK_STR:  AV
DEFAULT_BUCKET_ID:  WIN8_DRIVER_FAULT
PROCESS_NAME:  TRACERT.EXE
FAILURE_BUCKET_ID:  X64_AV_bridge+6ddc
MaxSpeed:     1800
CurrentSpeed: 1809
BiosVersion = F6a
BiosReleaseDate = 07/14/2008
SystemManufacturer = Gigabyte Technology Co., Ltd.
SystemProductName = 945PL-S3P
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Debug session time: Thu Jan 17 02:22:38.178 2013 (UTC - 5:00)
Loading Dump File [C:\Users\PalmDesert\SysnativeBSODApps\011713-15943-01.dmp]
Built by: 9200.16461.amd64fre.win8_gdr.121119-1606
System Uptime: 0 days 0:03:30.972
*** WARNING: Unable to verify timestamp for bridge.sys
*** ERROR: Module load completed but symbols could not be loaded for bridge.sys
Probably caused by : bridge.sys ( bridge+6ddc )
BugCheck D1, {4, 2, 0, fffff880049c6ddc}
BugCheck Info: DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
Bugcheck code 000000d1
Arguments: 
Arg1: 0000000000000004, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000000, value 0 = read operation, 1 = write operation
Arg4: fffff880049c6ddc, address which referenced memory
BUGCHECK_STR:  AV
DEFAULT_BUCKET_ID:  WIN8_DRIVER_FAULT
PROCESS_NAME:  TRACERT.EXE
FAILURE_BUCKET_ID:  X64_AV_bridge+6ddc
MaxSpeed:     1800
CurrentSpeed: 1809
BiosVersion = F6a
BiosReleaseDate = 07/14/2008
SystemManufacturer = Gigabyte Technology Co., Ltd.
SystemProductName = 945PL-S3P
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Debug session time: Sat Jan 12 02:44:59.216 2013 (UTC - 5:00)
Loading Dump File [C:\Users\PalmDesert\SysnativeBSODApps\011213-15849-01.dmp]
Built by: 9200.16461.amd64fre.win8_gdr.121119-1606
System Uptime: 0 days 11:04:27.010
*** WARNING: Unable to verify timestamp for bridge.sys
*** ERROR: Module load completed but symbols could not be loaded for bridge.sys
Probably caused by : bridge.sys ( bridge+6ddc )
BugCheck D1, {4, 2, 0, fffff8800414fddc}
BugCheck Info: DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
Bugcheck code 000000d1
Arguments: 
Arg1: 0000000000000004, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000000, value 0 = read operation, 1 = write operation
Arg4: fffff8800414fddc, address which referenced memory
BUGCHECK_STR:  AV
DEFAULT_BUCKET_ID:  WIN8_DRIVER_FAULT
PROCESS_NAME:  System
FAILURE_BUCKET_ID:  X64_AV_bridge+6ddc
MaxSpeed:     1800
CurrentSpeed: 1809
BiosVersion = F6a
BiosReleaseDate = 07/14/2008
SystemManufacturer = Gigabyte Technology Co., Ltd.
SystemProductName = 945PL-S3P
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Debug session time: Sun Jan  6 19:11:14.694 2013 (UTC - 5:00)
Loading Dump File [C:\Users\PalmDesert\SysnativeBSODApps\010713-23914-01.dmp]
Built by: 9200.16461.amd64fre.win8_gdr.121119-1606
System Uptime: 0 days 0:26:24.500
*** WARNING: Unable to verify timestamp for bridge.sys
*** ERROR: Module load completed but symbols could not be loaded for bridge.sys
Probably caused by : bridge.sys ( bridge+6ddc )
BugCheck D1, {4, 2, 0, fffff88005b6bddc}
BugCheck Info: DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
Bugcheck code 000000d1
Arguments: 
Arg1: 0000000000000004, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000000, value 0 = read operation, 1 = write operation
Arg4: fffff88005b6bddc, address which referenced memory
BUGCHECK_STR:  AV
DEFAULT_BUCKET_ID:  WIN8_DRIVER_FAULT
PROCESS_NAME:  System
FAILURE_BUCKET_ID:  X64_AV_bridge+6ddc
MaxSpeed:     1800
CurrentSpeed: 1809
BiosVersion = F6a
BiosReleaseDate = 07/14/2008
SystemManufacturer = Gigabyte Technology Co., Ltd.
SystemProductName = 945PL-S3P
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``


         
       J. C. Griffith, Microsoft MVP (jcgriff2)   
             
           [url]https://mvp.support.microsoft.com/profile/Griffith[/url]   

           [url]www.sysnative.com[/url]
             
           [url]www.jcgriff2.com[/url] 


¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨

Run - https://www.sysnative.com/forums/bs...river-verifier-blue-screen-death-related.html

Regards. . .

jcgriff2

koolkat77 · Jan 30, 2013

In addition to John's recommendations.. There are lot of network crashes.

Code:

fffff880`09a758b8  fffff803`02824e3b hal!KeQueryPerformanceCounter+0x4bfffff880`09a758c8  fffff880`018b9320 ndis!NdisAcquireRWLockRead+0x50
fffff880`09a758f8  fffff880`03dd445d ndiswan!SendFromProtocol+0x23d
fffff880`09a75918  fffff880`03ac1f47 pacer!RtlAcquireWriteLockAtDpcLevel+0xf
fffff880`09a75948  fffff880`03ac18a1 pacer!PcpIndicateTimerUnitConsumerEnd+0x65
fffff880`09a75950  fffff880`03dd0110 ndiswan!WPP_GLOBAL_Control
fffff880`09a75968  fffff880`03dd0110 ndiswan!WPP_GLOBAL_Control
fffff880`09a75988  fffff880`03dd4042 ndiswan!SendPacketOnBundle+0x142
fffff880`09a75a08  fffff880`03dbdfba ndiswan!NdisWanQueueSend+0x29a
fffff880`09a75a80  fffff880`03dd0110 ndiswan!WPP_GLOBAL_Control
fffff880`09a75ab8  fffff880`03dbdc96 ndiswan!MPSendNetBufferListChain+0xb6
fffff880`09a75f58  fffff880`01abb6d4 tcpip!IppDispatchSendPacketHelper+0x94fffff880`09a75f60  fffff880`01bedb90 tcpip!Ipv4Global
fffff880`09a75fc8  fffff880`01abb0a5 tcpip!IppPreparePacketChecksum+0x2d5fffff880`09a75fd8  fffff880`01aec4eb tcpip!IppInspectLocalDatagramsOut+0x43b
fffff880`09a76028  fffff880`01a939cf tcpip!IppProcessRawData+0x25f
fffff880`09a76078  fffff880`01abc076 tcpip!IppPacketizeDatagrams+0x2b6
fffff880`09a76080  fffff880`01bedb90 tcpip!Ipv4Global
fffff880`09a760d0  fffff880`01bedb90 tcpip!Ipv4Global
fffff880`09a760f8  fffff880`01bedb90 tcpip!Ipv4Global
fffff880`09a76108  fffff880`01abd283 tcpip!RtlAcquireScalableReadLockAtDpcLevel+0x23
fffff880`09a76128  fffff880`03bbeec8Unable to load image \SystemRoot\system32\DRIVERS\eamonm.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for eamonm.sys
*** ERROR: Module load completed but symbols could not be loaded for eamonm.sys
 eamonm+0xcaec8
fffff880`09a76328  fffff880`01beb000 tcpip!_security_cookie
fffff880`09a76348  fffff880`01a93744 tcpip!IppSendControl+0xe4
fffff880`09a76350  fffff880`01bedb00 tcpip!gIPSecNlTaskOffloadClientGuid+0x470
fffff880`09a76358  fffff880`01bedb90 tcpip!Ipv4Global
fffff880`09a76368  fffff880`01bedb90 tcpip!Ipv4Global
fffff880`09a76378  fffff880`01aba8b9 tcpip!IppFindCompartmentById+0x69
fffff880`09a763c0  fffff880`01bedb90 tcpip!Ipv4Global
fffff880`09a763c8  fffff880`01afc4ad tcpip!Ipv4SetEchoRequestCreate+0x8bd
fffff880`09a763d0  fffff880`01bedb00 tcpip!gIPSecNlTaskOffloadClientGuid+0x470
fffff880`09a763d8  fffff880`01bedb90 tcpip!Ipv4Global

Often caused by strict Security App, in your case Eset.

Please remove Eset antivirus:

Code:

Start Menu\Programs\ESET    Public:Start Menu\Programs\ESET    PublicStart Menu\Programs\ESET\ESET NOD32 Antivirus    Public:Start Menu\Programs\ESET\ESET NOD32 Antivirus    Public

Uninstallers (removal tools) for common antivirus software - ESET Knowledgebase
Enable Windows Defender..

Also check for a BIOS update:

Code:

BIOS Version/Date    Award Software International, Inc. F6a, 7/14/2008

Run SFC scannow and a clean boot:

Hope this helps..

imanonline · Jan 30, 2013

Hi,
Thanks to all
I tried these methods and i removed my eset antivirus and enabled windows difender and I have the latest bios version (f6a) for my motherboard
I also run sfc /scannow and no problem found
I saw some crash when i used firefox i had to disabled firefox plugins
and now i just saw BSOD at two times ( i attached mini dump files)
I should waiting for bridge.sys driver update
Now,I had to delete network bridge and i will create it again only when i have to use it
Should i create network bridge and Run Driver Verifier for bridge.sys or do not necessary?

GZ · Jan 30, 2013

Hello PRO,

Pardon my jumping in here, but could you tell me the reason you use a network bridge?

imanonline · Jan 30, 2013

Hello GZ,
I have Cable internet access i use network bridge to connect my systems to internet
if i delete network bridge i should manually disconnect cable from each one and connect it to another one every time i want use internet for them but with network bridge i do not need do this and if one system is connected to internet another one can also use internet
i thinks that is better i use manually method until bridge.sys driver update released for windows 8

jcgriff2 · Jan 30, 2013

The 3 dumps in post #5 name bridge.sys

We do need Driver Verifier enabled -- per instructions, select 3rd party drivers only (non-Microsoft).

Please answer GZ's question as TBH - I don't fully understand the bridge myself.

Thanks,

jcgriff2

GZ · Jan 30, 2013

PRO said:
Hello GZ,
I have Cable internet access i use network bridge to connect my systems to internet
if i delete network bridge i should manually disconnect cable from each one and connect it to another one every time i want use internet for them but with network bridge i do not need do this and if one system is connected to internet another one can also use internet
i thinks that is better i use manually method until bridge.sys driver update released for windows 8

Just an FYI. There are plenty of solutions to your issue without using your system as a network bridge. The easiest is by using a network router or switch so that multiple PCs can be connected to the network and access internet content without being routed through your system.

Could you expand on your network bridge?

I don't have access to your uploaded files while I am here at work, so I am going to have to rely on your description of your physical network.

A few questions...

What node is your PC connected to? (Router, Modem, etc.)
How is your PC connected to that node? (Wireless or Wired)
Do you use DHCP or manually set your IPs?
How is the bridged PC connected to your PC? (USB, ieee 1394, serial/parallel, Ethernet or Wireless)
How many physical network adapters do you have installed in your PC? (WiFi & NIC)

imanonline · Jan 30, 2013

thanks for your information
here is my connections information
I have two physical network adapters D-Link DFE-530TX PCI and D-Link DFE-520TX ( i used the second for Bridge Connection) in one system
and one physical network adapter in another system : Atheros AR8162/8166/8168 PCI-E Fast Ethernet (10/100MBit)
I use PPPOE connection to use the internet
bridge is connected Through Ethernet
I do not set any ip for D-Link DFE-530TX and PPPOE Connection that connected to internet
but i set ip 192.168.0.1 for second (D-Link DFE-520TX) adapter that use for bridge and set ip 192.168.0.2 for another system (Atheros AR8162/8166/8168 PCI-E Fast Ethernet)

GZ · Jan 30, 2013

Thank you. So the only other node is the PPoE Modem?

I would suggest the use of a physical router. Most routers will allow the physical connection of up to 5 PCs and wireless routers will do that plus allow a large number of wireless connections.

Hopefully the information provided will help the BSOD guys track down the problem in your Bridged connection, but my suggestion remains the same. An inexpensive wired or WiFi enabled router would negate the use of the network bridge.

koolkat77 · Jan 30, 2013

PRO said:
Hi,
Thanks to all
I tried these methods and i removed my eset antivirus and enabled windows difender and I have the latest bios version (f6a) for my motherboard
I also run sfc /scannow and no problem found
I saw some crash when i used firefox i had to disabled firefox plugins
and now i just saw BSOD at two times ( i attached mini dump files)
I should waiting for bridge.sys driver update
Now,I had to delete network bridge and i will create it again only when i have to use it
Should i create network bridge and Run Driver Verifier for bridge.sys or do not necessary?

PS: Those dumps are of 26-01-13

imanonline · Jan 31, 2013

GZ said:
Thank you. So the only other node is the PPoE Modem?

I would suggest the use of a physical router. Most routers will allow the physical connection of up to 5 PCs and wireless routers will do that plus allow a large number of wireless connections.

Hopefully the information provided will help the BSOD guys track down the problem in your Bridged connection, but my suggestion remains the same. An inexpensive wired or WiFi enabled router would negate the use of the network bridge.

yes , all three modems use PPPOE connection
i should create network bridge between D-Link DFE-530TX PCI and D-Link DFE-520TX PCI in my system and now the PPPOE connection can connected to internet and also other system with Atheros AR8162/8166/8168 PCI-E Fast Ethernet modem can use the internet Through the Network bridge that i created in my first system.

thanks for your suggestion

koolkat77 said:
PS: Those dumps are of 26-01-13

yes I'm sorry , i attached wrong mini dumps in post #5 those dumps are before i uninstalled eset antivirus
here is new minidumps that I've seen so far after uninstalled eset antivirus and run sfc / scannow command.

koolkat77 · Jan 31, 2013

Hmm. Similar bridge.sys errors and VirtualBox network driver errors. Uninstall and reinstall the software..Does it make any difference?

Go through this link:

You receive a "STOP 0x000000D1" error after you create a network bridge on a computer that is running Windows XP

Code:

********************************************************************************                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck D1, {4, 2, 0, fffff8800527fddc}

*** WARNING: Unable to verify timestamp for bridge.sys
*** ERROR: Module load completed but symbols could not be loaded for bridge.sys
*** WARNING: Unable to verify timestamp for VBoxNetFlt.sys
*** ERROR: Module load completed but symbols could not be loaded for VBoxNetFlt.sys
Probably caused by : bridge.sys ( bridge+6ddc )


Followup: MachineOwner
---------

Also run Driver Verifier as instructed by John earlier,.

If this does not help stop the BSOD-s, I'd suggest a clean install of Windows 8, because it looks like the network drivers are corrupted.

jcgriff2 · Jan 31, 2013

Hi -

Any doubt that bridge.sys is in fact the Microsoft Windows driver that we (I) think it is?

http://www.sysnative.com/drivers/driver.php?id=bridge.sys

Please run this command from an Admin CMD prompt -
START | type cmd.exe | Right-click on cmd.exe | "Run as Administrator" | Paste -

Code:

where /r %systemdrive%\ /f /t bridge.sys >0 & start notepad 0

It may take a few minutes to run.

A Notepad will open upon completion.

Output from my system - Windows 7 x64 SP1 -

Code:

     95232   07/13/2009      20:01:48  "C:\Windows\System32\drivers\bridge.sys"
     95232   07/13/2009      20:01:48  "C:\Windows\winsxs\amd64_microsoft-windows-networkbridge_31bf3856ad364e35_6.1.7600.16385_none_63dee2821fc69fce\bridge.sys"

Those are Windows drivers.

Regards. . .

jcgriff2

imanonline · Feb 1, 2013

Hi,
I Run that command and the output from my system is :

Code:

    129536   7/26/2012    5:53:17 AM  "C:\Windows\System32\Drivers\bridge.sys"
    129536   7/26/2012    5:53:17 AM  "C:\Windows\WinSxS\amd64_microsoft-windows-networkbridge_31bf3856ad364e35_6.2.9200.16384_none_60b3983f8fd9cf1e\bridge.sys"

I Also attach my bridge.sys system File , I hope it is useful

jcgriff2 · Feb 1, 2013

Hi -

Thanks for running the command.

bridge.sys is definitely a Windows 8 driver. From your attachment:

A Driver Verifier dump is really needed here as it will hopefully add info to the dump to help ID the culprit, assuming software is the cause.

VM may be an issue here as well.

Regards. . .

jcgriff2

jcgriff2 · Feb 1, 2013

Hi again,

I just found these items related to bridge.sys with the identical bugcheck 0xd1 that you are suffering from.

Please take a look and see if any of their solutions help:

This thread from Microsoft TechNet - http://social.technet.microsoft.com...l/thread/b2c540c5-9e12-4917-bde1-b4c0a7688a6b

... leads here --> http://henkhoogendoorn.blogspot.com/2012/09/bsod-in-windows-8-on-bridgesys-driver.html

Regards. . .

jcgriff2

jcgriff2 · Feb 1, 2013

Hi -

Apologies for triple-play here, but this D-Link DFE-520TX PCI Fast Ethernet Adapter driver just caught my eye:

Code:

fetn63a.sys                 Thu Aug 16 15:04:30 2012 (502D443E)

http://carrona.org/drivers/driver.php?id=fetn63a.sys

Where did you obtain the August 2012 driver from?

I was only able to locate a 2010 driver that does not list Windows 8 support -

http://www.dlink.com.my/support/support_detail.asp?idProduct=467

Also, your system files show fetn63a.sys location as:

Code:

C:\Windows\LastGood.Tmp\system32\DRIVERS\fetn63a.sys

I would expect to find it in -

Code:

C:\Windows\system32\DRIVERS\fetn63a.sys

Where did C:\Windows\LastGood.Tmp folder come from? What else is in it?

Regards. . .

jcgriff2

imanonline · Feb 1, 2013

I upgrade this driver fetn63a.sys an install latest version : 9/21/2012 ( 1.8.0.0 )
but the fetn63a.sys file in lastgood.tmp folder is for 6/2/2012 ( 1.5.0.0 )
I attached all of them
I see only old fetn63.sys file in lastgood.tmp folder

I Also removed VM Software But as I said in my first post I think Problem is for trace command when I created network bridge
If I run Tracert -d 4.2.2.4 command or install any software that need to trace I will see BSOD.
for example when I try to run your file ( jcgriff2 BSOD File Collection app ) when I was online I see BSOD
and when I disconnected from internet I can run and use your file
but If I delete network bridge and run Tracert -d 4.2.2.4 command it works completely and also other programs.

BSOD When i use Network Bridge for conncet to the internet

Member

Attachments

Co-Founder / AdminBSOD Instructor/ExpertMicrosoft MVP (Ret.)

Co-Founder / AdminBSOD Instructor/ExpertMicrosoft MVP (Ret.)

Well-known member

Member

Attachments

Visiting Expert

Member

Co-Founder / AdminBSOD Instructor/ExpertMicrosoft MVP (Ret.)

Visiting Expert

Member

Visiting Expert

Well-known member

Member

Attachments

Well-known member

Co-Founder / AdminBSOD Instructor/ExpertMicrosoft MVP (Ret.)

Member

Attachments

Co-Founder / AdminBSOD Instructor/ExpertMicrosoft MVP (Ret.)

Co-Founder / AdminBSOD Instructor/ExpertMicrosoft MVP (Ret.)

Co-Founder / AdminBSOD Instructor/ExpertMicrosoft MVP (Ret.)

Member

Attachments

Co-Founder / Admin
BSOD Instructor/Expert
Microsoft MVP (Ret.)

Co-Founder / Admin
BSOD Instructor/Expert
Microsoft MVP (Ret.)

Co-Founder / Admin
BSOD Instructor/Expert
Microsoft MVP (Ret.)

Co-Founder / Admin
BSOD Instructor/Expert
Microsoft MVP (Ret.)

Co-Founder / Admin
BSOD Instructor/Expert
Microsoft MVP (Ret.)

Co-Founder / Admin
BSOD Instructor/Expert
Microsoft MVP (Ret.)

Co-Founder / Admin
BSOD Instructor/Expert
Microsoft MVP (Ret.)