Page 3 of 4 First 1234 Last
  1. #41

    Join Date
    Jul 2017
    Location
    Cambridge, UK
    Age
    58
    Posts
    84

    Re: BSOD 0x7b on a Win7 32bit

    If a backup copy is made XiloLee will be able to get it back. I suspect Macrium had already changed the boot configuration anyway. If you want to wait for XiloLee before trying anything more that is OK.


    • Ad Bot

      advertising
      Beep.

        
       

  2. #42

    Re: BSOD 0x7b on a Win7 32bit

    Quote Originally Posted by philc43 View Post
    You can try and force the system into recovery mode by turning it on and off three times during the boot process. If this does not work can you boot from the W7 recovery disk and try to initiate a series of at least three startup repairs.

    Can you get into the BIOS and ensure that it is seeing the correct harddisk and booting from it?
    I tried to turn it on and off three times during the boot process. That didn't fix it.
    The BIOS is showing the correct hard drive.

    I guess I have no choice but to boot into the Win7 recovery disk. I just feel bad because I know it's going to destroy the updates that XiloLee did.

    Docfxit

  3. #43

    Join Date
    Jul 2017
    Location
    Cambridge, UK
    Age
    58
    Posts
    84

    Re: BSOD 0x7b on a Win7 32bit

    Did you make any further progress?

  4. #44

    Re: BSOD 0x7b on a Win7 32bit

    Yes. I have it so it doesn't come up with the blue screen. It boots up to the BSOD 0x7b.
    I need to fix the Boot Manager so it's back where it was.

    If you have any other ideas to fix the 0x7b I can perform them while I am fixing the boot parameters.

    Thanks,

    Docfxit

  5. #45

    Join Date
    Jul 2017
    Location
    Cambridge, UK
    Age
    58
    Posts
    84

    Re: BSOD 0x7b on a Win7 32bit

    I have a few more questions on your system. In an earlier post you said the problem started back in Feb 2017 so I have gone back to that mini-dump. I don't know if the system has changed since then but back then you had 8GB of memory using two different modules. Is it still the same? You are currently trying to use Win7 32bit which will not be able to see all that memory anyway. Also, using two different memory sticks from different manufacturers can give rise to BSOD events. I would take one of them out as part of the troubleshooting tests.

    The Feb 2017 mini-dump showed you were on BIOS_VERSION: 9SKT87AUS BIOS_DATE: 01/09/2015. The most up to date BIOS is 9SKT99A dated 2017/07/14 - this looks more recent than the one you mentioned in post #1

    Back in post #11 axe0 asked you to answer the questions from the BSOD posting instructions. Can you do this so we have an up to date picture of what your system configuration is.

  6. #46

    Re: BSOD 0x7b on a Win7 32bit

    Quote Originally Posted by philc43 View Post
    I have a few more questions on your system. In an earlier post you said the problem started back in Feb 2017 so I have gone back to that mini-dump.
    Yes. That's when the problem started.

    Quote Originally Posted by philc43 View Post
    I don't know if the system has changed since then but back then you had 8GB of memory using two different modules. Is it still the same?
    I currently have the same 8GB of memory
    I have another partition that is running Win7 64bit just fine.
    I just removed one 4GB of memory and started the machine. I got a BSOD 0x7b
    I just removed the other 4GB of memory and replaced the first 4GB of memory and started the machine. I got a BSOD 0x7b
    I have run Memtest for 24hrs before. It showed no failures.
    I did have a memory manager in there to allow me to use the extra memory.

    Quote Originally Posted by philc43 View Post
    You are currently trying to use Win7 32bit which will not be able to see all that memory anyway. Also, using two different memory sticks from different manufacturers can give rise to BSOD events. I would take one of them out as part of the troubleshooting tests.

    The Feb 2017 mini-dump showed you were on BIOS_VERSION: 9SKT87AUS BIOS_DATE: 01/09/2015. The most up to date BIOS is 9SKT99A dated 2017/07/14 - this looks more recent than the one you mentioned in post #1


    I will update it now.

    Quote Originally Posted by philc43 View Post
    Quote Originally Posted by philc43 View Post
    Back in post #11 axe0 asked you to answer the questions from the BSOD posting instructions. Can you do this so we have an up to date picture of what your system configuration is.
    I didn't see that. I will take a look and get you all the info.

    Thanks,

    Docfxit

  7. #47

    Re: BSOD 0x7b on a Win7 32bit

    Quote Originally Posted by axe0 View Post
    Could you answer the questions from the posting instructions.
    Blue Screen of Death (BSOD) Posting Instructions - Windows 10, 8.1, 8, 7 & Vista
    I can't run Sysnative BSOD Dump + System File Collection App because I can't boot into the system to run anything.

    OS - Windows 7
    x86 (32-bit)
    The original installed OS on system was Win7
    The OS is an OEM version (came pre-installed on system)
    Age of system (hardware) I don't remember.
    Age of OS installation I don't remember - I have not re-installed the OS.

    CPU i7-3770 CPU @ 3.4GHz
    Video Card - Intel Sandybridge/Ivybridge Graphics Chipset
    MotherBoard -Lenovo M92p
    Power Supply - brand & wattage I don't know

    System Manufacturer Lenovo
    Exact model number M92p

    Desktop

    Does this answer your questions?

    Docfxit

  8. #48
    xilolee's Avatar
    Join Date
    Dec 2013
    Location
    World, Europe, Italy
    Posts
    2,057
    • specs System Specs
      • Manufacturer:
        XILOLEE.com
      • Model Number:
        XILO
      • Motherboard:
        ASROCK FM2A88M Pro3+ chipset A88X Bolton-D4
      • CPU:
        A10-7800, 4 CPU, 4 thr, 65/45W, FM2+, 28nm, Steamroller/Kaveri
      • Memory:
        10GB (Nanya and kingston ddr3-1333 9-9-9-24)
      • Graphics:
        Radeon R7 720MHz (8 GPU cores, integrated in CPU)
      • Sound Card:
        RealTek ALC662 (integrated in MB)
      • Hard Drives:
        Seagate ST500DM002-1BD142 500GB 7200RPM
      • Power Supply:
        SuperFlower 450W 80+ Platinum (SF-450P14PE)
      • Case:
        Sharkoon VG4-S
      • Cooling:
        Realtek RTL8111GR (NIC integrated in MB)
      • Display:
        Samsung SyncMaster SA100 LS22A100NS-EN
      • Operating System:
        Windows 10 Home/Standard x64

    Re: BSOD 0x7b on a Win7 32bit

    Yes, win7 x86 is in first partition, therefore you can try it.
    Quote Originally Posted by xilolee View Post
    Re-try:
    Code:
    bcdedit /set {bootmgr} device partition=\Device\HarddiskVolume1

  9. #49

    Re: BSOD 0x7b on a Win7 32bit

    Quote Originally Posted by xilolee View Post
    Yes, win7 x86 is in first partition, therefore you can try it.
    Quote Originally Posted by xilolee View Post
    Re-try:
    Code:
    bcdedit /set {bootmgr} device partition=\Device\HarddiskVolume1
    I can't get it to make the change above.

    I entered it into the cmd line in Recovery Console
    And it said "The operation completed successfully."

    But it still says:
    Device partition=C:

    Docfxit

  10. #50

    Re: BSOD 0x7b on a Win7 32bit

    To: Xilolee

    I was instructed to run Fixing Windows boot problems - v7 - Macrium Reflect
    on post #34

    After running it the machine booted up to a blue screen with nothing on it. Macrium support didn't know how to fix it. The only way I was able to boot to see anything was to run Recovery console. When I ran Recovery console it deleted all the changes you asked me to put in. I'm very sorry all the work you did was lost.

    I wrote a bat file to recreate all the changes you asked me to make. After re-building the boot entries I ran recovery console to test my rebuild.
    Recovery console came up with this change:
    The following startup options will be added:
    Name: Windows Recovery Environment (recovered)
    Path: Recovery\b0bb89f1-9f5b-11e7-8057-a0e8978e4021\Winre.wim
    Windows Device: Partition=\\?\GLOBALROOT\Device\HarddiskVolume4 (68145 MB)

    A copy of the current boot configuration data will be saved as: C:\Boot\BCD.Backup.0004

    Is that something I need to add to the boot entries?

    Currently this is what I have:
    Code:
    Windows Boot Manager
    --------------------
    identifier              {bootmgr}
    device                  partition=C:
    path                    \bootmgr
    description             Windows Boot Manager
    inherit                 {globalsettings}
    default                 {default}
    displayorder            {default}
                            {7ea0f578-f306-11e7-b76f-b416b7b9c242}
                            {7ea0f579-f306-11e7-b76f-b416b7b9c242}
    timeout                 5
    
    Windows Boot Loader
    -------------------
    identifier              {default}
    device                  partition=C:
    path                    \Windows\system32\winload.exe
    description             Windows 7_OS
    locale                  en-US
    inherit                 {bootloadersettings}
    bootdebug               No
    osdevice                partition=C:
    systemroot              \Windows
    nx                      OptIn
    
    Windows Boot Loader
    -------------------
    identifier              {7ea0f578-f306-11e7-b76f-b416b7b9c242}
    device                  partition=\Device\HarddiskVolume2
    path                    \Windows\system32\winload.exe
    description             Windows XP
    locale                  en-US
    inherit                 {bootloadersettings}
    osdevice                partition=\Device\HarddiskVolume2
    systemroot              \Windows
    
    Windows Boot Loader
    -------------------
    identifier              {7ea0f579-f306-11e7-b76f-b416b7b9c242}
    device                  partition=\Device\HarddiskVolume4
    path                    \Windows\system32\winload.exe
    description             Windows 7 Ultimate
    locale                  en-US
    inherit                 {bootloadersettings}
    osdevice                partition=\Device\HarddiskVolume4
    systemroot              \Windows
    Thanks,

    Docfxit

  11. #51
    xilolee's Avatar
    Join Date
    Dec 2013
    Location
    World, Europe, Italy
    Posts
    2,057
    • specs System Specs
      • Manufacturer:
        XILOLEE.com
      • Model Number:
        XILO
      • Motherboard:
        ASROCK FM2A88M Pro3+ chipset A88X Bolton-D4
      • CPU:
        A10-7800, 4 CPU, 4 thr, 65/45W, FM2+, 28nm, Steamroller/Kaveri
      • Memory:
        10GB (Nanya and kingston ddr3-1333 9-9-9-24)
      • Graphics:
        Radeon R7 720MHz (8 GPU cores, integrated in CPU)
      • Sound Card:
        RealTek ALC662 (integrated in MB)
      • Hard Drives:
        Seagate ST500DM002-1BD142 500GB 7200RPM
      • Power Supply:
        SuperFlower 450W 80+ Platinum (SF-450P14PE)
      • Case:
        Sharkoon VG4-S
      • Cooling:
        Realtek RTL8111GR (NIC integrated in MB)
      • Display:
        Samsung SyncMaster SA100 LS22A100NS-EN
      • Operating System:
        Windows 10 Home/Standard x64

    Re: BSOD 0x7b on a Win7 32bit

    Check if you have the bootmgr file and the boot path in c: (in the first partition), and list the files in the boot path.
    Last edited by xilolee; 01-06-2018 at 03:34 PM.

  12. #52

    Re: BSOD 0x7b on a Win7 32bit

    $RECYCLE.BIN DIR 1/5/2018 5:51:54 AM HS
    Batch DIR 10/14/2017 9:39:43 AM -
    BCD_Backup DIR 1/6/2018 7:37:31 AM -
    boot DIR 1/6/2018 3:19:51 PM HSA
    Dnload2 DIR 9/7/2017 8:26:57 AM -
    FRST DIR 6/1/2017 12:49:50 PM -
    HostingSpaces DIR 4/24/2014 7:45:18 AM -
    inetpub DIR 12/6/2013 9:59:29 PM -
    Intel DIR 4/20/2015 5:19:11 PM -
    MyDocuments2 DIR 2/5/2017 6:31:56 PM -
    NST DIR 9/26/2017 1:17:20 AM -
    Perl DIR 1/8/2014 6:57:04 PM -
    PHP DIR 12/29/2015 7:51:29 PM -
    Program Files DIR 2/3/2017 5:38:40 PM R
    ProgramData DIR 3/6/2017 8:55:06 AM -
    Programs DIR 8/29/2017 12:02:40 PM -
    Sandbox DIR 2/28/2014 8:09:52 PM R
    Scratch DIR 11/29/2016 7:19:48 PM -
    swshare DIR 11/10/2015 9:40:09 PM -
    SWTOOLS DIR 10/19/2016 11:20:26 PM -
    System Volume Information DIR 1/6/2018 10:45:28 AM -
    Temp DIR 1/3/2018 6:28:09 PM -
    Users DIR 3/6/2017 8:46:39 AM R
    WebsitePanel DIR 1/12/2014 8:12:16 PM -
    Windows DIR 1/5/2018 9:11:08 AM -
    autoexec.bat 24 6/10/2017 7:03:33 AM A
    bcdbackup.LOG 9216 6/10/2017 7:03:33 AM A
    bdr-bz01 2294848 6/10/2017 7:03:33 AM A
    bdr-cf01 308 6/10/2017 7:03:33 AM A
    bdr-im01.gz 39692613 6/10/2017 7:03:33 AM A
    bdr-ld01 253404 6/10/2017 7:03:33 AM A
    bdr-ld01.mbr 9216 6/10/2017 7:03:33 AM A
    boot.iniGood 212 6/10/2017 7:03:33 AM A
    bootmgr 398156 1/5/2018 3:33:41 PM A
    BootOSVer.txt 40 1/6/2018 3:19:48 PM A
    cert.txt 62276 6/10/2017 7:03:33 AM A
    config.sys 10 6/10/2017 7:03:33 AM A
    dude.conf 691 6/10/2017 7:03:33 AM A
    e.bat 116 6/10/2017 7:03:33 AM A
    install.bin 128 7/1/2017 5:26:55 PM A
    IO.SYS 0 12/6/2011 12:59:30 PM RA
    MGlogs.zip 85594 6/10/2017 7:03:33 AM A
    MSDOS.SYS 0 12/6/2011 12:59:30 PM RA
    my.cnf 223 6/10/2017 7:03:33 AM A
    ntdetect.com 47564 4/14/2008 7:00:00 AM A
    ntldr 250048 4/14/2008 7:00:00 AM A
    Null 46 1/6/2018 3:20:05 PM A
    Redeploy.log 255748 1/5/2018 3:27:39 PM A
    rescuepe.log 757 1/5/2018 3:31:54 PM A
    SeeDisk.txt 1284 7/1/2017 5:28:04 PM A
    SsRd0001.cif 3133251584 6/10/2017 7:03:33 AM A

  13. #53

    Re: BSOD 0x7b on a Win7 32bit

    I'm having trouble booting into XP.

    This is the latest:
    Code:
    Windows Boot Manager
    --------------------
    identifier              {bootmgr}
    device                  partition=C:
    path                    \bootmgr
    description             Windows Boot Manager
    inherit                 {globalsettings}
    default                 {default}
    displayorder            {default}
                            {180435b3-f338-11e7-b961-f62f4e29a442}
                            {180435b4-f338-11e7-b961-f62f4e29a442}
    timeout                 5
    
    Windows Boot Loader
    -------------------
    identifier              {default}
    device                  partition=C:
    path                    \Windows\system32\winload.exe
    description             Windows 7_OS
    locale                  en-US
    inherit                 {bootloadersettings}
    bootdebug               No
    osdevice                partition=C:
    systemroot              \Windows
    nx                      OptIn
    
    Windows Boot Loader
    -------------------
    identifier              {180435b3-f338-11e7-b961-f62f4e29a442}
    device                  partition=D:
    path                    \NST\ntldr
    description             Windows XP
    locale                  en-US
    osdevice                partition=D:
    systemroot              \Windows
    
    Windows Boot Loader
    -------------------
    identifier              {180435b4-f338-11e7-b961-f62f4e29a442}
    device                  partition=E:
    path                    \Windows\system32\winload.exe
    description             Windows 7 Ultimate
    locale                  en-US
    osdevice                partition=E:
    systemroot              \Windows
    resumeobject            {720b612e-f338-11e7-9951-806e6f6e6963}
    The error I get is:
    File: \nst\ntldr
    Status: 0xc000007b

    This partition was running along with the other two partitions just fine.

    Thanks,

    Docfxit

  14. #54
    xilolee's Avatar
    Join Date
    Dec 2013
    Location
    World, Europe, Italy
    Posts
    2,057
    • specs System Specs
      • Manufacturer:
        XILOLEE.com
      • Model Number:
        XILO
      • Motherboard:
        ASROCK FM2A88M Pro3+ chipset A88X Bolton-D4
      • CPU:
        A10-7800, 4 CPU, 4 thr, 65/45W, FM2+, 28nm, Steamroller/Kaveri
      • Memory:
        10GB (Nanya and kingston ddr3-1333 9-9-9-24)
      • Graphics:
        Radeon R7 720MHz (8 GPU cores, integrated in CPU)
      • Sound Card:
        RealTek ALC662 (integrated in MB)
      • Hard Drives:
        Seagate ST500DM002-1BD142 500GB 7200RPM
      • Power Supply:
        SuperFlower 450W 80+ Platinum (SF-450P14PE)
      • Case:
        Sharkoon VG4-S
      • Cooling:
        Realtek RTL8111GR (NIC integrated in MB)
      • Display:
        Samsung SyncMaster SA100 LS22A100NS-EN
      • Operating System:
        Windows 10 Home/Standard x64

    Re: BSOD 0x7b on a Win7 32bit

    What 's the result of bootrec /ScanOs?

  15. #55

    Re: BSOD 0x7b on a Win7 32bit

    I had all partitions hidden except for the non bootable Windows7_OS and I disconnected one extra drive for troubleshooting. I needed to get some work done so I un hid my XP and Windows 64bit partitions. I couldn't boot into XP. I ended up booting into Windows 64bit and using EasyBCD to fix the XP booting problem.

    Currently bootrec /ScanOs gives me these results:

    Code:
    Scanning all disks for Windows installations.
    
    Please wait, since this may take a while...
    
    Successfully scanned Windows installations.
    Total identified Windows installations: 1
    [1]  E:\WINDOWS
    The operation completed successfully.
    Currently BCDEdit gives me these results: (Which don't look correct to me but it's booting)

    Code:
    Windows Boot Manager
    --------------------
    identifier              {bootmgr}
    device                  partition=D:
    path                    \bootmgr
    description             Windows Boot Manager
    locale                  en-US
    inherit                 {globalsettings}
    default                 {default}
    displayorder            {180435b2-f338-11e7-b961-f62f4e29a442}
                            {180435b4-f338-11e7-b961-f62f4e29a442}
                            {default}
    timeout                 5
    displaybootmenu         Yes
    
    Windows Boot Loader
    -------------------
    identifier              {180435b2-f338-11e7-b961-f62f4e29a442}
    device                  partition=D:
    path                    \Windows\system32\winload.exe
    description             Windows 7_OS
    locale                  en-US
    inherit                 {bootloadersettings}
    bootdebug               No
    osdevice                partition=D:
    systemroot              \Windows
    nx                      OptIn
    
    Windows Boot Loader
    -------------------
    identifier              {180435b4-f338-11e7-b961-f62f4e29a442}
    device                  partition=F:
    path                    \Windows\system32\winload.exe
    description             Windows 7 Ultimate
    locale                  en-US
    osdevice                partition=F:
    systemroot              \Windows
    resumeobject            {720b612e-f338-11e7-9951-806e6f6e6963}
    
    Real-mode Boot Sector
    ---------------------
    identifier              {default}
    device                  partition=F:
    path                    \NST\ntldr
    description             Microsoft Windows XP
    locale                  en-US
    custom:250000c2         0
    Thanks,

    Docfxit

  16. #56
    Sysnative Staff
    BSOD Kernel Dump Analyst
    Contributor

    Join Date
    May 2015
    Location
    The Netherlands
    Age
    21
    Posts
    442
    • specs System Specs
      • Manufacturer:
        Custom build
      • Motherboard:
        Gigabyte B150-HD3P-CF
      • CPU:
        Intel(R) Core(TM) i5-6500 CPU @ 3.20GHz
      • Memory:
        16GB DDR4 Crucial Ballistix Sport LT BLS8G4D240F
      • Graphics:
        Intel(R) HD Graphics 530
      • Sound Card:
        (1) Intel(R) Display Audio (2) Realtek HD Audio
      • Hard Drives:
        Crucial MX200 500GB
      • Power Supply:
        Corsair RM550x
      • Case:
        Fractal Design Define S
      • Cooling:
        Cooler Master TX3 i
      • Display:
        1920 x 1080 @ 60 Hz
      • Operating System:
        Windows 10 Pro

    Re: BSOD 0x7b on a Win7 32bit

    Could you run the hardware tests linked in the posting instructions.
    Blue Screen of Death (BSOD) Posting Instructions - Windows 10, 8.1, 8, 7 & Vista

  17. #57

    Re: BSOD 0x7b on a Win7 32bit

    Quote Originally Posted by axe0 View Post
    Could you run the hardware tests linked in the posting instructions.
    Blue Screen of Death (BSOD) Posting Instructions - Windows 10, 8.1, 8, 7 & Vista
    I'm guessing you would like to see the Sysnative BSOD Dump + System File Collection App

    Would you like me to run that within XP or Win7 64bit? I can't run it in the OS that I can't boot into.

    Docfxit

  18. #58
    Moderator
    BSOD Kernel Dump Analyst
    Windows Update Senior Analyst
    softwaremaniac's Avatar
    Join Date
    Oct 2014
    Location
    Croatia
    Age
    22
    Posts
    5,858
    • specs System Specs
      • Motherboard:
        ASRock Fatal1ty P67 Main Board
      • CPU:
        Intel Core i7-2700K 3.5GHz
      • Memory:
        Crucial 2x8GB DDR3 1600 MHz
      • Graphics:
        Gigabyte GTX 1080 G1 Gaming 8 GB
      • Sound Card:
        Asus Xonar DSX
      • Hard Drives:
        WD Caviar Black 1TB SATA III 7200rpm, WD Caviar Black 6TB SATA III 7200rpm
      • Disk Drives:
        Samsung 840 Evo 250GB
      • Power Supply:
        Corsair GS 700W
      • Case:
        Silverstone KL04B Case
      • Cooling:
        CoolerMaster Arctic Freezer 7 Pro
      • Display:
        Philips Brilliance BDM4065UC 4K 3840x2160
      • Operating System:
        Windows 10 Pro 1703 x64

    Re: BSOD 0x7b on a Win7 32bit

    We don't want the App, we want you to download the tools used for testing hardware and boot from a CD/USB in order to test your hardware for faults.
    If I haven't replied to your thread within 48 hours, please send me a Personal Message.

  19. #59

    Re: BSOD 0x7b on a Win7 32bit

    Quote Originally Posted by softwaremaniac View Post
    We don't want the App, we want you to download the tools used for testing hardware and boot from a CD/USB in order to test your hardware for faults.
    If you are talking about:
    Run HDD Diagnostics - http://www.sysnative.com/forums/hardware-tutorials/4072-hard-drive-hdd-diagnostics.html
    Test RAM - http://www.sysnative.com/forums/hardware-tutorials/3909-test-ram-memtest86.html

    I have run both of them.

    If you are talking about something else please let me know.

    Thank you,

    Docfxit

  20. #60
    Moderator
    BSOD Kernel Dump Analyst
    Windows Update Senior Analyst
    softwaremaniac's Avatar
    Join Date
    Oct 2014
    Location
    Croatia
    Age
    22
    Posts
    5,858
    • specs System Specs
      • Motherboard:
        ASRock Fatal1ty P67 Main Board
      • CPU:
        Intel Core i7-2700K 3.5GHz
      • Memory:
        Crucial 2x8GB DDR3 1600 MHz
      • Graphics:
        Gigabyte GTX 1080 G1 Gaming 8 GB
      • Sound Card:
        Asus Xonar DSX
      • Hard Drives:
        WD Caviar Black 1TB SATA III 7200rpm, WD Caviar Black 6TB SATA III 7200rpm
      • Disk Drives:
        Samsung 840 Evo 250GB
      • Power Supply:
        Corsair GS 700W
      • Case:
        Silverstone KL04B Case
      • Cooling:
        CoolerMaster Arctic Freezer 7 Pro
      • Display:
        Philips Brilliance BDM4065UC 4K 3840x2160
      • Operating System:
        Windows 10 Pro 1703 x64

    Re: BSOD 0x7b on a Win7 32bit

    And both checked out?
    If I haven't replied to your thread within 48 hours, please send me a Personal Message.

Page 3 of 4 First 1234 Last

Similar Threads

  1. [Win7 x86] 0x7B INACCESSIBLE_BOOT_DEVICE - Can't boot
    By Docfxit in forum BSOD, Crashes, Kernel Debugging
    Replies: 10
    Last Post: 03-08-2017, 05:42 PM
  2. BSOD Win7 help
    By vannet10 in forum BSOD, Crashes, Kernel Debugging
    Replies: 7
    Last Post: 03-28-2015, 11:50 PM
  3. [Win7] BSOD
    By devilishlyx in forum BSOD, Crashes, Kernel Debugging
    Replies: 10
    Last Post: 06-13-2014, 10:56 AM
  4. BSOD Windows 7 32bit
    By douwa08 in forum BSOD, Crashes, Kernel Debugging
    Replies: 15
    Last Post: 07-28-2013, 05:54 AM
  5. Win7 BSOD with SSD only
    By aep_2007 in forum BSOD, Crashes, Kernel Debugging
    Replies: 4
    Last Post: 06-26-2012, 11:05 AM

Log in

Log in