BSOD - CLOCK_WATCHDOG_TIMEOUT Bugcheck code: 0x101

Hei · Jul 11, 2016

Greetings,

Recently my pc has been crashing randomly (once a day or so) and i can't figure out the cause. Sadly CCleaner deleted the other dmp files before i was aware of it but they all reported the same error. I've updated all drivers i could think of but to no avail.

Answers:
· OS - Windows 10, 8.1, 8, 7, Vista ? Windows 7
· x86 (32-bit) or x64 ? x64
· What was original installed OS on system? None (newly bought SSD)
· Is the OS an OEM version (came pre-installed on system) or full retail version (YOU purchased it from retailer)? Retail
· Age of system (hardware)? About 4 months
· Age of OS installation - have you re-installed the OS? 4 months

· CPU Intel Skylake 6700K
· Video Card Nvidia 970 GTX
· MotherBoard - (if NOT a laptop) GA-Z170X-Gaming 3-EU
· Power Supply - brand & wattage (if laptop, skip this one) XFX TS650 80Plus Gold (XFX, 650W)

· System Manufacturer None/Custom built
· Exact model number (if laptop, check label on bottom) None/Custom built

· Laptop or Desktop? Desktop

Thanks!

Hei

Hei · Jul 11, 2016

I've ran SSD diagnostics and it says both SSD's are in perfect health. I've also let memtest86 run for 10 passes with no errors found. I've enabled driver verifier according to instructions but so far nothing; will let it run for 24 hours as specified and post results tomorrow should it cause a crash.

System temps (CUPID HWMonitor):
MB 28C - 45C (max temp 46C, depending on which sensor),
CPU 25C - 36C (max temp 40C, depending on which core),
SSD's 35C and 37C respectively,
Data HDD 32C,
GPU 40C (max temp 68C when under heavy load)

Edit:
It appears i already had driver verifier enabled and the BSOD crash happened with driver verifier enabled. The dmp file is the driver verifier enabled one (that should be in the zip file).

xilolee · Jul 11, 2016

Hi Hei. :welcome:

I've just checked your perfmon report and these are the problems found:

The device, Microsoft PS/2 Mouse, is reporting "tv_ConfigMgrErr24". This device will not be available until the issue is resolved. The Plug and Play ID for this device is ACPI\PNP0F03\0.
The device, Standard PS/2 Keyboard, is reporting "tv_ConfigMgrErr24". This device will not be available until the issue is resolved. The Plug and Play ID for this device is ACPI\PNP0303\0.
The Security Center is unable to identify an active anti-virus application. Either there is no anti-virus product installed or it is not recognized. (It seems you have ms essentials and malwarebytes, correct?)
User Access Control is disabled. It is highly recommended that you run Windows with User Access Control enabled.
VirtualCloneDrive is installed
Daemon tools is installed

Actually I can't check the minidump, but the most likely culprits could be virtualclonedrive and daemon tools and I'd start with uninstall those for first (at least to exclude them, the time to solve your problem... If possible!).

Hei · Jul 11, 2016

Hey,

Well my mouse (Logitech G502) and keyboard (Razer Blackwidow) work perfectly so i don't know whats that about or how to fix it (both drivers from their official sites).
Yes i have MSEssentials and Malwarebytes.
I uninstalled DaemonTools in favor of VirtualCloneDrive (since trial expired and VCD is free) so i don't know why the daemon tools driver remained. Do i remove it by just finding the driver and deleting it?
I will uninstall VirtualCloneDrive.

Thanks!

Hei

xilolee · Jul 11, 2016

In system information, daemon tools is in component - storage - scsi and in software environment - system drivers.

(dtproscsibus - DAEMON Tools Pro Virtual SCSI Bus - c:\windows\system32\drivers\dtproscsibus.sys - Kernel Driver - started: Yes - start mode: Manual - state: Running - status: OK ....)

You could probably find it and uninstall it from device manager (menu view - show hidden devices - controllor ide? controller scsi?), without touching directly the driver or through SC command...

Hei · Jul 11, 2016

Found it (Daemon tools virtual SCSI Bus) and uninstalled it. Using the same method i also found these two and uninstalled them.

The device, Microsoft PS/2 Mouse, is reporting "tv_ConfigMgrErr24". This device will not be available until the issue is resolved. The Plug and Play ID for this device is ACPI\PNP0F03\0.
The device, Standard PS/2 Keyboard, is reporting "tv_ConfigMgrErr24". This device will not be available until the issue is resolved. The Plug and Play ID for this device is ACPI\PNP0303\0.

Edit:

After restarting the computer the Microsoft PS/2 Mouse and Standard PS/2 Keyboard came back so i don't know how to remove them permanently.

Jared · Jul 11, 2016

We'll need a Kernel dump from C:\Windows\MEMORY.dmp to look at any relevant information. Upload it to a 3rd party file sharing site, and paste the download link here.

Hei · Jul 11, 2016

I changed the settings from small memory dump to kernel memory dump so next time the system crashes i will upload it. Thanks!

axe0 · Jul 13, 2016

Hi Hei,

Your activation seems to be a OEM SLP from ASUS, as it is used on a retail Gigabyte motherboard your installation is counterfeit.
Piracy is a thing where no support for is provided, because of various reasons including the Forum Rules and that it can be a waste of time for everyone.

Search

Search

BSOD - CLOCK_WATCHDOG_TIMEOUT Bugcheck code: 0x101

Hei

Member

Attachments

Hei

Member

xilolee

Moderator

Hei

Member

Attachments

xilolee

Moderator

Hei

Member

Jared

Sysnative Staff, BSOD Kernel Dump Expert

Hei

Member

axe0

Administrator,
BSOD Academy Instructor,
Security Analyst

BSOD - CLOCK_WATCHDOG_TIMEOUT Bugcheck code: 0x101

Member

Attachments

Member

Moderator

Member

Attachments

Moderator

Member

Sysnative Staff, BSOD Kernel Dump Expert

Member

Administrator, BSOD Academy Instructor, Security Analyst

Administrator,
BSOD Academy Instructor,
Security Analyst