BSOD every 5-10min - Windows 7 x64

jezz · Jan 14, 2015

Hey guys, I have almost no knowledge of computers, I just play games. Recently my pc started freezing. When it started it was only once a day or so, within a month it was every 5-10minutes. I asked my brother for help and he thought it might be my ram. It wasn't. He then suggested it was my harddrives. I reformated them, unplugged them, then did a clean install of windows 7. It kinda fixed the problem, as it no longer freezes. However, it does give me bsod crashes every 5-10minutes. I have no idea what to do, hoping someone here can help me. these are my stop codes

0x000000F4
(0x0000000000000003, 0xFFFFFA8008555590, 0xFFFFFA8008555870, 0xFFFFF80003301500)

If there's any important information I've missed, please point it out to me.

[EDIT] I just saw the posting instructions, my bad for not looking first. Im getting onto it now

View attachment SysnativeFileCollectionApp.zip

jezz · Jan 14, 2015

View attachment perfmon.zip

· OS - Windows 8.1, 8, 7, Vista ? Windows 7
· x86 (32-bit) or x64 ? x64
· What was original installed OS on system? Same as current
· Is the OS an OEM version (came pre-installed on system) or full retail version (YOU purchased it from retailer)? Uh not too sure, my computer was a custom made by my brothers friend.
· Age of system (hardware) about 2 years
· Age of OS installation - have you re-installed the OS? Yes just a couple days ago.

· CPU Intel Core i5-4670 CPU @ 3.40GHz (4 CPUs) ~3.4GHz
· Video Card Dont know
· MotherBoard - (if NOT a laptop) Z87X-UD3H
· System Manufacturer GIGABYTE
· Exact model number (if laptop, check label on bottom) N/A
· Laptop or Desktop? Desktop

jcgriff2 · Jan 14, 2015

Hi. . .

In addition to the 0xf4 (critical object termination) BSODs, I found 0x7a (,0xc000000e,,) BSODs as well.

0x7a = requested page of kernel data could not be read into RAM from the page file

Exception error code 0xce - HDD issue -

Code:

ERROR_CODE: (NTSTATUS) 0xc000000e - A device which does not exist was specified.

DISK_HARDWARE_ERROR: There was error with disk hardware

Check for firmware upgrade on the 120 GB SSD. System files report the drive to be:

Code:

Model	OCZ-AGILITY3 ATA Device

OCZ Firmware updates - OCZ Toolbox and Firmware Update Releases
OCZ Formware Update Guide - http://ocz.com/consumer/download/firmware/ocz_toolbox_firmware_update_guide_windows.pdf

Run SeaTools for SOD, LONG test on the 1 TB SATA HDD:

Code:

Model	WDC WD3200AAKS-00TMA0 ATA Device

https://www.sysnative.com/forums/hardware-tutorials/4072-hard-drive-hdd-diagnostics.html

Do you have dual boot Windows? I see that each drive has the tell-tale 100 MB partition on it.

Regards. . .

jcgriff2

Search

Search

BSOD every 5-10min - Windows 7 x64

jezz

New member

jezz

New member

jcgriff2

Co-Founder / Admin
BSOD Instructor/Expert
Microsoft MVP (Ret.)

BSOD every 5-10min - Windows 7 x64

jezz

New member

jezz

New member

jcgriff2

Co-Founder / AdminBSOD Instructor/ExpertMicrosoft MVP (Ret.)

Co-Founder / Admin
BSOD Instructor/Expert
Microsoft MVP (Ret.)