I've done as you asked however there is a big issue with the source of install.wim, you will see in the command prompt contents I copied and included in the zip file which I incorrectly titled sfc scan contents that I attempted the restore health command but the system could not find the source file nor did I or you denote a source location in the command and frankly I don't know how we could have. I was attempting further in the unhide the hidden recovery partition which on my computer is disk 0 partition 6 which is 9GB the larger of three recovery partitions and definitely hidden, the other two 1 and 5 are only 450MB. the goal was to assign it a drive letter in hopes that you might come up with source location for install.wim but the override failed saying I used the wrong command which I emulated from dism help set, it's all there for you to see. Again the override to reveal the hidden recovery partition so as to assign it a drive letter failed so if that is pertinent to what we are doing I would need correct command, you will see in the contents exactly what i did.
So how do we come up with a source for install.wim which i believe is what it is looking for in order to complete successfully ?
Also I had read in one place only somewhere that it was necessary to start the component store before running restorehealth but i don't see that any place else so please weigh in on the necessity of that.
It said it was trying to download the files and I wondered if it mattered that i was in safe mode running the command though i can't imagine where it would download a file pertinent to my machine, please advise on that and suggest next action.
End tale, it could not complete because of no source. I will also post the command prompt contents here along with the link to cbs.zip
https://www.dropbox.com/s/wienovyxgo2aylz/CBS.zip?dl=0
/////////////////////////////////////////////////
COMMAND PROMPT CONTENTS
////////////////////////////////////////////////
Microsoft Windows [Version 6.2.9200]
(c) 2012 Microsoft Corporation. All rights reserved.
C:\windows\system32>DISM /Online /Cleanup-Image /RestoreHealth
Deployment Image Servicing and Management tool
Version: 6.2.9200.16384
Image Version: 6.2.9200.16384
[==========================100.0%==========================]
Error: 0x800f0906
The source files could not be downloaded.
Use the "source" option to specify the location of the files that are required t
o restore the feature. For more information on specifying a source location, see
Configure a Windows Repair Source.
The DISM log file can be found at C:\windows\Logs\DISM\dism.log
C:\windows\system32>DISKPART
Microsoft DiskPart version 6.2.9200
Copyright (C) 1999-2012 Microsoft Corporation.
On computer: TRINITYENVY
DISKPART> LIST PARTITION
There is no disk selected to list partitions.
Select a disk and try again.
DISKPART> 0
Microsoft DiskPart version 6.2.9200
ACTIVE - Mark the selected partition as active.
ADD - Add a mirror to a simple volume.
ASSIGN - Assign a drive letter or mount point to the selected volume.
ATTRIBUTES - Manipulate volume or disk attributes.
ATTACH - Attaches a virtual disk file.
AUTOMOUNT - Enable and disable automatic mounting of basic volumes.
BREAK - Break a mirror set.
CLEAN - Clear the configuration information, or all information, off the
disk.
COMPACT - Attempts to reduce the physical size of the file.
CONVERT - Convert between different disk formats.
CREATE - Create a volume, partition or virtual disk.
DELETE - Delete an object.
DETAIL - Provide details about an object.
DETACH - Detaches a virtual disk file.
EXIT - Exit DiskPart.
EXTEND - Extend a volume.
EXPAND - Expands the maximum size available on a virtual disk.
FILESYSTEMS - Display current and supported file systems on the volume.
FORMAT - Format the volume or partition.
GPT - Assign attributes to the selected GPT partition.
HELP - Display a list of commands.
IMPORT - Import a disk group.
INACTIVE - Mark the selected partition as inactive.
LIST - Display a list of objects.
MERGE - Merges a child disk with its parents.
ONLINE - Online an object that is currently marked as offline.
OFFLINE - Offline an object that is currently marked as online.
RECOVER - Refreshes the state of all disks in the selected pack.
Attempts recovery on disks in the invalid pack, and
resynchronizes mirrored volumes and RAID5 volumes
that have stale plex or parity data.
REM - Does nothing. This is used to comment scripts.
REMOVE - Remove a drive letter or mount point assignment.
REPAIR - Repair a RAID-5 volume with a failed member.
RESCAN - Rescan the computer looking for disks and volumes.
RETAIN - Place a retained partition under a simple volume.
SAN - Display or set the SAN policy for the currently booted OS.
SELECT - Shift the focus to an object.
SETID - Change the partition type.
SHRINK - Reduce the size of the selected volume.
UNIQUEID - Displays or sets the GUID partition table (GPT) identifier or
master boot record (MBR) signature of a disk.
DISKPART> LIST PARTITION
There is no disk selected to list partitions.
Select a disk and try again.
DISKPART> SELECT DISK 0
Disk 0 is now the selected disk.
DISKPART> LIST PARTITION
Partition ### Type Size Offset
------------- ---------------- ------- -------
Partition 1 Recovery 450 MB 1024 KB
Partition 2 System 260 MB 451 MB
Partition 3 Reserved 128 MB 711 MB
Partition 4 Primary 585 GB 839 MB
Partition 5 Recovery 450 MB 586 GB
Partition 6 Recovery 9 GB 586 GB
DISKPART> SELECT PARTITION 6
Partition 6 is now the selected partition.
DISKPART> DETAIL PARTITION
Partition 6
Type : de94bba4-06d1-4d40-a16a-bfd50179d6ac
Hidden : Yes
Required: Yes
Attrib : 0X8000000000000001
Offset in Bytes: 630138601472
Volume ### Ltr Label Fs Type Size Status Info
---------- --- ----------- ----- ---------- ------- --------- --------
* Volume 5 Recovery NTFS Partition 9 GB Healthy Hidden
DISKPART> SET ID = 07 OVERRIDE
The specified type is not in the correct format.
For more information on the command type: HELP SET
DISKPART> HELP SET
Changes the partition type field for the partition with focus.
Syntax: SET ID={<BYTE> | <GUID>} [OVERRIDE] [NOERR]
ID={<BYTE> | <GUID>}
Specifies the new partition type.
For master boot record (MBR) disks, you can specify a partition
type byte, in hexadecimal form, for the partition. Any
partition type byte can be specified with this parameter except
for type 0x42 (LDM partition). Note that the leading '0x' is
omitted when specifying the hexadecimal partition type.
For GUID partition table (GPT) disks you can specify a
partition type GUID for the partition. Recognized GUIDs
include:
EFI System partition:
c12a7328-f81f-11d2-ba4b-00a0c93ec93b
Basic data partition:
ebd0a0a2-b9e5-4433-87c0-68b6b72699c7
Any partition type GUID can be specified with this parameter
except for the following:
Microsoft Reserved partition:
e3c9e316-0b5c-4db8-817d-f92df00215ae
LDM Metadata partition on a dynamic disk:
5808c8aa-7e8f-42e0-85d2-e1e90434cfb3
LDM Data partition on a dynamic disk:
af9b60a0-1431-4f62-bc68-3311714a69ad
Cluster Metadata partition:
db97dba9-0840-4bae-97f0-ffb9a327c7e1
Other than the limitations mentioned, DiskPart otherwise does
not check the partition type for validity except to ensure that
it is a byte in hexadecimal form or a GUID.
OVERRIDE Enables DiskPart to force the file system on the volume to
dismount before changing the partition type. When changing
the partition type, DiskPart will attempt to lock and dismount
the file system on the volume. If this parameter is not specifie
d,
and the call to lock the file system fails, (because some other
application has an open handle to the volume), the entire
operation will fail. When this parameter is specified, the
dismount is forced even if the call to lock the file system
fails. When a file system is dismounted, all opened handles to
the volume will become invalid.
NOERR For scripting only. When an error is encountered, DiskPart
continues to process commands as if the error did not occur.
Without the NOERR parameter, an error causes DiskPart to exit
with an error code.
Intended for Original Equipment Manufacturer (OEM) use only.
A partition must be selected for this operation to succeed.
Caution:
Changing partition type fields with this parameter might cause your
computer to fail or be unable to start up. Unless you are an OEM or an
IT professional experienced with GPT disks, do not change partition
type fields on GPT disks using this parameter. Instead, always use the
CREATE PARTITION EFI command to create EFI System partitions, the
CREATE PARTITION MSR command to create Microsoft Reserved partitions,
and the CREATE PARTITION PRIMARY command without the ID parameter to
create primary partitions on GPT disks.
This command does not work on dynamic disks nor on Microsoft Reserved
partitions.
Example:
SET ID=07 OVERRIDE
SET ID=ebd0a0a2-b9e5-4433-87c0-68b6b72699c7
DISKPART> SET ID=07 OVERRIDE
The specified type is not in the correct format.
For more information on the command type: HELP SET
DISKPART> EXIT
Leaving DiskPart...
C:\windows\system32>
