SFCFix hangs after DISM finishes

gman49 · Apr 11, 2015

Windows 8.1 updated up to KB3000850, which fails. Notifications (in general) fail. AV is BitDefender TS--up to date. Run Secunia PSI--only flag is XML 4.0 which I need for Corel.
Started out scanning for malware. I'm a SysAdmin, so I have an extensive toolkit--Gmer, MBAM, current rescue linux boot disks, TCPView, rootkitrevealer, and many more.
Found nothing at all.

Have the usual cluster of symptoms. Update won't notify, KB3000850 won't install, sfc finds corruption it cannot fix (yes, the MSTDC.log cannot be fixed), TOAST is disabled and the Metro Apps open and immediately drop to the task bar.
Per the instructions for this forum, I downloaded and ran SFCFix.exe. Several hours ago... in fact, its still "running", with 0% cpu and 0 disk or network activity. Still holding 5.4MB RAM. No log file.
Finished DISM. Component store corruption was repaired, though it mostly says that (well, in the last 30-40 times I've run it), though it does sometimes not find anything.

Tried to upload CBS logs... probably too large. Will use Method 2.

Thanks

gman49 · Apr 11, 2015

Got SFCFix.txt log after terminating the SFCFix.exe process.
Will try method 2 again, since I don't see any uploads, and we lost power while I was trying to upload earlier.

LogBot · Apr 11, 2015

Logfile submission from gman49

Logfile submission from gman49.

The logfiles are available at: https://www.sysnative.com/niemiro/fileDistribution/2015-04/5785.zip

Go The Power · Apr 13, 2015

Hello and welcome

The file doesn't seem to extracting for me.

Export CBS folder

Right click on the

button
Click on File Explorer
Double-click on the C: drive, scroll down to, and double click on the Windows folder.
Find and double click on the Logs folder.
Right-click on the CBS folder, and select Copy.
Go back to your Desktop, right-click on it, and select Paste. You should now see a copy of the CBS folder appear on your Desktop called CBS.
Right-click on this new folder, and navigate through Send to, and select Compressed (zipped) folder.
A new file, also called CBS (CBS.zip), but this time with a different icon, will be created.
Please rename this file to CBS_{Insert forum username here}_{insert todays Date here}.zip For example "CBS_Go The Power_1803.Zip"

Please Note:: if the file is too big to upload to you next post please upload via Dropbox or One Drive

gman49 · Apr 14, 2015

OK
Tried upload... not showing.
Sent logs to DropBox
Link:
https://www.dropbox.com/s/bjzrpffhlqykwkr/CBS_Gman49_2015-04-14.zip?dl=0

Go The Power · Apr 16, 2015

Please follow the guide here: https://www.sysnative.com/forums/wi...error-800700a1-when-installing-kb3000850.html

Once done please upload a new CBS log.

gman49 · Apr 16, 2015

SFCFix reports no corruption found.
AutoAnalysis::
SUMMARY: No corruptions were detected.
AutoAnalysis:: directive completed successfully.
Did not run 2nd pass with zip file.

CBS logs @ https://www.dropbox.com/s/7fv8obiado1mznj/CBS_Gman49_2015-04-16.zip?dl=0

Go The Power · Apr 18, 2015

Please run the fix with the zip file, once done run SFC again and post a new CBS log back here please.

gman49 · Apr 19, 2015

Ran Fix with zip, SFC.
Logs at https://www.dropbox.com/s/g9ueiwhwsl4hw5b/CBS_Gman49_2015-04-19.zip?dl=0

Go The Power · Apr 23, 2015

There are no errors in the CBS log.

gman49 · Apr 23, 2015

Great! That got Update going again, and the dreaded kb3000850 finally installed successfully.

But metro apps still don't open. Notifications (TOAST, network, etc) were turned off, though not showing "Enabled" in group policy shut off, I turned them back on by disabling the appropriate keys. When I try to reset the Store I get:
___________________________
[Window Title]
ms-windows-store

urgeCaches

[Content]
ms-windows-store

urgeCaches

The app didn't start.
___________________________

I'm getting a 10010 error in the system log:

<The server Windows.Store did not register with DCOM within the required timeout.>

and 5973 in the application log:

<Activation of app winstore_cw5n1h2txyewy!Windows.Store failed with error: The app didn't start.
See the Microsoft-Windows-TWinUI/Operational log for additional information.>

Suggestions?

Go The Power · Apr 24, 2015

Glad to hear the update installed for you :)

Can you please go into C:\windows\system32\winevt\logs can you see Microsoft-Windows-TWinUI/Operational.evxt? If yes please add it into a zip file and attach to your next post.

gman49 · Apr 24, 2015

Link here: https://www.dropbox.com/s/6wn2n4c89e7vdk1/Microsoft-Windows-TWinUI%4Operational.zip?dl=0

Go The Power · Apr 27, 2015

Please go Here and download Process Monitor -> Save the file to your desktop.

Double click on Process Monitor -> Press Yes on the UAC -> you should now have a Filter box appeared -> press Ok

Now click on File -> Capture Events (make sure this is ticked)

Try and open a few store apps, once they have failed click on File -> Save -> save the file to your desktop.

Now go to your desktop and you should see a file called Logfile.pml -> please but it in a Zip file -> and upload it for me to have a read. As the file is going to be quite big please use Dropbox

gman49 · Apr 27, 2015

OK
Logfile.pml->logfile.zip link: https://www.dropbox.com/s/12mby269isf3vq0/Logfile.zip?dl=0
Interesting reading...

and thanks.

Search

Search

SFCFix hangs after DISM finishes

gman49

Member

gman49

Member

LogBot

Well-known member

Go The Power

Senior Administrator, Windows Update Expert, Contributor

gman49

Member

Go The Power

Senior Administrator, Windows Update Expert, Contributor

gman49

Member

Go The Power

Senior Administrator, Windows Update Expert, Contributor

gman49

Member

Go The Power

Senior Administrator, Windows Update Expert, Contributor

gman49

Member

Go The Power

Senior Administrator, Windows Update Expert, Contributor

gman49

Member

Go The Power

Senior Administrator, Windows Update Expert, Contributor

gman49

Member